Electrician
$24.50 - $33.50/hr
Service Workers Full-Time/Part-Time: Full time Pay Type: Hourly Department: Facilities Maintenance ... hacksaw, pipe threader, and conduit bender. * Pulling wire through conduit with assistance.
$24.50 - $33.50/hr
Service Workers Full-Time/Part-Time: Full time Pay Type: Hourly Department: Facilities Maintenance ... hacksaw, pipe threader, and conduit bender. * Pulling wire through conduit with assistance.
$24.50 - $33.50/hr
Service Workers Full-Time/Part-Time: Full time Pay Type: Hourly Department: Facilities Maintenance ... hacksaw, pipe threader, and conduit bender. * Pulling wire through conduit with assistance.
Thread and install water pipe * Maintain Air Handlers * Familiar with Trane systems * Overall ... USD 41.40 - USD 56.92 Employment Type: FULL_TIME
Thread and install water pipe * Maintain Air Handlers * Familiar with Trane systems * Overall ... USD 41.40 - USD 56.92 Employment Type: FULL_TIME
$18 - $25.59/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$25.59 per hour Core Values: * Deliver Service * Be ...
$18 - $25.59/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$25.59 per hour Core Values: * Deliver Service * Be ...
$18 - $25.59/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$25.59 per hour Core Values: * Deliver Service * Be ...
$18 - $25.59/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$25.59 per hour Core Values: * Deliver Service * Be ...
$18 - $29.91/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$29.91 per hour Core Values: * Deliver Service * Be ...
$18 - $29.91/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$29.91 per hour Core Values: * Deliver Service * Be ...
$18 - $29.91/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$29.91 per hour Core Values: * Deliver Service * Be ...
$18 - $29.91/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$29.91 per hour Core Values: * Deliver Service * Be ...
Dixon, IL · On-site
$18 - $25.59/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$25.59 per hour Core Values: * Deliver Service * Be ...
Dixon, IL · On-site
$18 - $25.59/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$25.59 per hour Core Values: * Deliver Service * Be ...
Dixon, IL · On-site
$18 - $29.91/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$29.91 per hour Core Values: * Deliver Service * Be ...
Dixon, IL · On-site
$18 - $29.91/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$29.91 per hour Core Values: * Deliver Service * Be ...
Dixon, IL · On-site
$18 - $25.59/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$25.59 per hour Core Values: * Deliver Service * Be ...
Dixon, IL · On-site
$18 - $25.59/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$25.59 per hour Core Values: * Deliver Service * Be ...
Dixon, IL · On-site
$18 - $29.91/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$29.91 per hour Core Values: * Deliver Service * Be ...
Dixon, IL · On-site
$18 - $29.91/hr
Ability to cut and thread pipe up to 2 inches in diameter. * Ability to specify and to run EMT ... Job Type: Full-time / Hourly Pay: $18.00-$29.91 per hour Core Values: * Deliver Service * Be ...
$27 - $35/hr
Job Type: Full-time Competitive Pay Rate: $27.00 - $35.00 per hour Benefits: * Health insurance ... pipe threader, breaks, presses, calipers, micrometers, other measuring instruments, and test ...
$27 - $35/hr
Job Type: Full-time Competitive Pay Rate: $27.00 - $35.00 per hour Benefits: * Health insurance ... pipe threader, breaks, presses, calipers, micrometers, other measuring instruments, and test ...
Geneva, IL · On-site
$27 - $35/hr
Job Type: Full-time Competitive Pay Rate: $27.00 - $35.00 per hour Benefits: * Health insurance ... pipe threader, breaks, presses, calipers, micrometers, other measuring instruments, and test ...
Geneva, IL · On-site
$27 - $35/hr
Job Type: Full-time Competitive Pay Rate: $27.00 - $35.00 per hour Benefits: * Health insurance ... pipe threader, breaks, presses, calipers, micrometers, other measuring instruments, and test ...
Geneva, IL · On-site
$26 - $35/hr
Job Type: Full-time Competitive Pay Rate: $26.00 - $35.00 per hour Benefits: * Health insurance ... pipe threader, breaks, presses, calipers, micrometers, other measuring instruments, and test ...
Geneva, IL · On-site
$26 - $35/hr
Job Type: Full-time Competitive Pay Rate: $26.00 - $35.00 per hour Benefits: * Health insurance ... pipe threader, breaks, presses, calipers, micrometers, other measuring instruments, and test ...
$26 - $35/hr
Job Type: Full-time Competitive Pay Rate: $26.00 - $35.00 per hour Benefits: * Health insurance ... pipe threader, breaks, presses, calipers, micrometers, other measuring instruments, and test ...
$26 - $35/hr
Job Type: Full-time Competitive Pay Rate: $26.00 - $35.00 per hour Benefits: * Health insurance ... pipe threader, breaks, presses, calipers, micrometers, other measuring instruments, and test ...
$26.40 - $31.50/hr
Job Title: HVAC Assistant Full- or Part-Time: Full time Exempt or Non-Exempt: No Hourly Rate: 25.90 ... Cut, thread, and assemble pipe using saw, pipe cutter, and threader. * Fabricate and assemble ...
$26.40 - $31.50/hr
Job Title: HVAC Assistant Full- or Part-Time: Full time Exempt or Non-Exempt: No Hourly Rate: 25.90 ... Cut, thread, and assemble pipe using saw, pipe cutter, and threader. * Fabricate and assemble ...
Cherry Valley, IL · On-site
$23.41/hr
Job Type Full-time Description 1 position open, 2nd Shift (2:00 pm - 10:30 pm & OT as required) $23 ... and thread pipe. * Prepare and perform cutting to length of all water hosing. * Cut, bend, and ...
Cherry Valley, IL · On-site
$23.41/hr
Job Type Full-time Description 1 position open, 2nd Shift (2:00 pm - 10:30 pm & OT as required) $23 ... and thread pipe. * Prepare and perform cutting to length of all water hosing. * Cut, bend, and ...
This is a full-time position with a pay rate of $30/hour and full benefits after 90 days of ... Assemble, cut, thread, and lay pipes while also offering assistance in the repair, installation ...
New
This is a full-time position with a pay rate of $30/hour and full benefits after 90 days of ... Assemble, cut, thread, and lay pipes while also offering assistance in the repair, installation ...
New
Chicago, IL · On-site
$30/hr
This is a full-time position with a pay rate of $30/hour and full benefits after 90 days of ... Assemble, cut, thread, and lay pipes while also offering assistance in the repair, installation ...
New
Chicago, IL · On-site
$30/hr
This is a full-time position with a pay rate of $30/hour and full benefits after 90 days of ... Assemble, cut, thread, and lay pipes while also offering assistance in the repair, installation ...
New
Welcome to Furman University's Career Site!
If you have any questions or need additional assistance, please contact the Office of Human Resources via email at recruitment@furman.eduor by calling 864-294-3103.
Job Title:
ElectricianJob Family:
Service WorkersFull-Time/Part-Time:
Full timePay Type:
HourlyDepartment:
Facilities MaintenanceJob Summary:
To perform construction, installation, maintenance and repair of electrical systems, equipment and fixtures.Job Description:
Responsibilities:
1. Maintains all electrical systems and power supply throughout campus including:
High-Voltage underground and overhead systems including transformers
Low Standard Voltage
Standard Voltage, Switchgear, Panels, Feeders and Branch Circuits
Various types of electrical equipment.
Generator Maintenance and Functional Testing.
2. Performs installation and repair of wiring, electrical fixtures, and systems by:
Reviewing diagrams and/or existing electrical systems.
Measuring, cutting, bending, threading, assembling and installing electrical conduit using tools such as hacksaw, pipe threader, and conduit bender.
Pulling wire through conduit with assistance.
Splicing and termination of wires using standard industry methods.
Connecting wiring to lighting fixtures and power equipment, using hand tools.
Installing control and distribution apparatus; such as switches, relays, and circuit breaker panels; fastening them in place with screws or bolts, using drills, masonry chisels, hammer, anchor bolt and wrench.
Connecting power cables to equipment and installing grounding leads.
Testing continuity of circuits to ensure electrical compatibility and safety of all components, using standard instruments such as ohmmeter, meggar and oscilloscope.
Observing functions of installed equipment or system to detect hazards and the need for adjustment, relocation or replacement.
3. Maintains the power and lights at the stadium and other on-campus locations.
4. Provides electrical and generator maintenance at the President's home.
5. Records name, completion date and time, and description of parts used on work orders.
6. Locates and marks underground electrical conduit using locator and drawings.
7. Operates various equipment including trenching equipment for new installations ofunderground power and lighting.
8. Completes job estimates and purchase order requests as required.
9. Supports special events.
10. Assists electrical sub-contractors and other trades in Facilities Services on projects.
11. Reviews plans and blueprints for take offs, upgrades drawings as projects are finished.
12. Performs other duties as assigned by the supervisor.
13. Follows safety procedures.
14. Completes performance review process with supervisor/employees to understand job performance expectations and how they fit into the department and university goals.
15. Communicates openly and recognizes contributions of co-workers and supervisor.
16. Pursues professional development to keep pace with demands for services and information; including maintaining up to date information about the department and university.
Relationships:
Continuous contact with members of own work unit and immediate supervisor requiring planning, coordinating, problem solving, presenting information and suggestions related mutual goals.
Parties generally have cooperative attitudes.
Frequent contact with members of other departments, students, general public requiring exchange of factual information and explanation of rules, regulation, practices or functions.
Discussion of non-controversial matters.
Responsibility for Final Decisions:
Tasks involve multiple procedures with interrelated processes or steps.
Work involves choosing the appropriate option or procedure to follow and applying established rules and procedures.
Errors are readily detected in the normal course of work by standard check or crosscheck.
Causes little difficulty or loss of time to correct.
Reports To: Electrical Supervisor
Completed work is referred to supervisor for review.
Education/Skill Requirements:
High School graduate with 1 - 2 years experience in related field.
Ability to read and interpret instructions, descriptions and diagrams in equipment/system manuals.
Knowledge of National Electrical Codes.
Work Conditions:
Work is performed both outside for stadium, lighting and outside units and inside with constant exposure to heat, cold, electrical currents.
Continuous use of gears, knobs, levers, hand tools (screwdriver, testers, pliers, etc) to repair, install and operate electrical units.
Work requires:
Continuous crouching, crawling to access lights.
Daily climbing of stairs and ladders to reach lights, circuitry.
Frequent reaching to access lighting and circuitry at a distance and overhead.
Frequent lifting of 10-20 lbs.
Occasional use of bucket truck to reach outside lighting.
On call 24 hours a day.
Education Requirements:
Certification Requirements:
Job Posting End Date (if date is blank, posting is open ended):
Sourced by ZipRecruiter
Real estate
11 - 50 Employees
Greenville, SC, US
1888