ZipRecruiter

Log In

2

Fulltime Cnc Programmer Jobs in Washington (NOW HIRING)

CACI International, Inc.

Junior CNC Machinist

Bethesda, MD · On-site

$31.20/hr

Service Contract Act Time Type: Full time Minimum Clearance Required to Start: Secret Employee Type ... However, the use of engineering controls, materials substitution and personal protective equipment ...

CACI

Junior CNC Machinist

Bethesda, MD · On-site

$31.20/hr

Service Contract Act Time Type: Full time Minimum Clearance Required to Start: Secret Employee Type ... However, the use of engineering controls, materials substitution and personal protective equipment ...

CACI International, Inc.

Junior CNC Machinist

Bethesda, MD · On-site

$31.20/hr

Service Contract Act Time Type: Full time Minimum Clearance Required to Start: Secret Employee Type ... However, the use of engineering controls, materials substitution and personal protective equipment ...

Cruz Associates Inc

Machinist

Indian Head, MD · On-site

$23.25 - $32/hr

This position will be full-time technician, including shift work, and shall be subject to physical ... CNC Programming strongly desired * U.S. Citizen and valid driver's license * Ability to obtain and ...

ZIPPERS PERFORMANCE

Be Seen First

Manufacturing Technician

Elkridge, MD · On-site

$40K - $75K/yr

Full Time, Position | Flexible Hours | Zipper's Performance Products is a manufacturer of high ... programming in Mastercam Primary Responsibilities: * Program, set up and operate CNC Mills and ...

HII

Prototype Machinist (Mech Tech H 3)

Alexandria, VA · On-site

$30.26 - $45/hr

Requisition Number: 29184 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt ... Proficient with programming, setting-up and operating CNC tools. 5-axis experience is a plus * Must ...

HII

Prototype Machinist (Mech Tech H 3)

Alexandria, VA · On-site

$30.26 - $45/hr

Requisition Number: 29184 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt ... Proficient with programming, setting-up and operating CNC tools. 5-axis experience is a plus * Must ...

HII

Prototype Machinist (Mech Tech H 3)

Alexandria, VA

$30.26 - $45/hr

Requisition Number: 29184 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt ... Proficient with programming, setting-up and operating CNC tools. 5-axis experience is a plus * Must ...

previous page

Showing results 41-60

All JobsFulltime Cnc Programmer JobsFulltime Cnc Programmer Jobs in Washington

Fulltime Cnc Programmer information

What is the difference between Fulltime Cnc Programmer vs Cnc Operator?

AspectFulltime Cnc ProgrammerCnc Operator
CredentialsTechnical certifications, programming skillsBasic machine operation knowledge
Work EnvironmentDesigning, programming, setting up CNC machinesRunning and monitoring CNC machines
Employer & IndustryManufacturing, aerospace, automotiveManufacturing, machining shops
Search & Comparison IntentUnderstanding programming roles, skills requiredMachine operation, daily tasks

The main difference between a Fulltime Cnc Programmer and a Cnc Operator lies in their responsibilities. The programmer focuses on creating and optimizing CNC programs, requiring technical skills and certifications. The operator primarily runs and monitors machines based on existing programs. Both roles are essential in manufacturing but serve different functions within the production process.

What are popular job titles related to Fulltime Cnc Programmer jobs in Washington?

For Fulltime Cnc Programmer jobs in Washington, the most frequently searched job titles are:

What job categories do people searching Fulltime Cnc Programmer jobs in Washington look for?

The top searched job categories for Fulltime Cnc Programmer jobs in Washington are:

What cities in Washington are hiring for Fulltime Cnc Programmer jobs?

Cities in Washington with the most Fulltime Cnc Programmer job openings:

Fulltime Cnc Programmer jobs near you

CNC Machinist-Bethesda, Maryland

Burke, VA • On-site

CACI International, Inc.
See more jobs at CACI International, Inc.external

$31.20/hr

Full-time

Medical, Retirement, PTO

Re-posted 4 days ago

Key responsibilities

  • Determine and perform appropriate setup of CNC vertical machining centers for programs provided by CAM programmers.

  • Operate and set up 4- and 5-axis CNC machines, including mills and lathes, to fabricate parts within specified tolerances.

  • Read blueprints and mechanical drawings, select appropriate cutters and tool holders, and maintain dimensional accuracy during machining.

Job description

Job Title: CNC Machinist
Job Category: Service Contract Act
Time Type: Full time
Minimum Clearance Required to Start: Secret
Employee Type: Regular
Percentage of Travel Required: Up to 10%
Type of Travel: Local
* * *
The Opportunity:
CACI is seeking two CNC Machinists in support of the Naval Surface Warfare Center Carderock Division's (NSWCCDs) Fabrication Group, located in Bethesda, MD, for the machining of parts that will be used in Research and Development tests and assessments in support of the development of DoD ship and submarine systems. This is a state-of-the-art prototype fabrication facility equipped with both HAAS and Doosan machines. Machinists frequently use both 4- and 5-axis CNC machines, mills, and lathes to fabricate parts with tolerances of +/- .001". Both the research and development environment, coupled with the advanced equipment available, makes this a fantastic opportunity to continue honing your skillset as a machinist.
Responsibilities:
  • Ability to determine and perform appropriate set up of CNC Vertical machining centers for programs provided by CAM programmers
  • Experience with 4- and 5-axis CNC machines
  • Ability to design and build fixtures preferred
  • Knowledge of G and M codes with ability to program at the control to build fixtures and edit CAM generated programs
  • Ability to select appropriate cutters and tool holders
  • Ability to set-up and operate the full range of machine tools found in a well-equipped prototype development shop
  • Ability to maintain dimensional accuracy, to specified tolerances that may be less than +/-.001", during machining processes, through the use of measuring instruments (e.g. vernier calipers, inside/outside & depth micrometers, gage blocks, surface and height gages, and dial indicators).
  • Ability to work independently with minimal supervision
  • Comfortable asking questions, taking instruction, and then applying that new knowledge on the job
  • Ability to read blue prints and mechanical drawings
  • Knowledge of Mil-Spec and GD&T specifications
  • Ability to work from verbal instructions and sketches
  • Ability to perform machine shop math and trigonometry
  • Ability to lift and maneuver objects weighing 80 pounds
  • Adhere to safety protocols

Qualifications:
Required:
  • At least 1-3 years of work experience in CNC machining or Successful completion of machinist apprenticeship
  • Journeyman CNC Machinist qualification
  • Trade School certificate
  • High School diploma or equivalent
  • DoD Secret Clearance or capability to be granted and maintain DoD Secret Clearance
  • Knowledge of Shop, Facility and Division Safety Policies and requirements

Desired:
  • Experience with HAAS/Doosan machines
  • Experience with HAAS machine automation
  • Experience with CNC lathes and CNC mills
  • CAM and Solid modeling CAD experience a plus
  • Ability to operate a forklift a plus

This position is contingent on funding and may not be filled immediately. However, this position is representative of positions within CACI that are consistently available. Individuals who apply may also be considered for other positions at CACI.
What You Can Expect:
A culture of integrity.
At CACI, we place character and innovation at the center of everything we do. As a valued team member, you'll be part of a high-performing group dedicated to our customer's missions and driven by a higher purpose - to ensure the safety of our nation.
An environment of trust.
CACI values the unique contributions that every employee brings to our company and our customers - every day. You'll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality.
A focus on continuous growth.
Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground - in your career and in our legacy.
Pay Range:
This posting is for a position covered by the Service Contract Labor Standards (SCA). The pay and benefits provided for this position will meet or exceed the minimum required amounts detailed in the wage determination issued by the Department of Labor and made applicable to this position, as incorporated into CACI's government contract for the work location.
Minimum Required Hourly Wage:
$31.20
There are a host of other factors that can influence final salary including, but not limited to, geographical location, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits.
CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Apply