ZipRecruiter

Log In

2

Full Time Quality Assurance Contractor Jobs in Rochester, NY

Syntec Optics

Quality Engineer

Rochester, NY · On-site

$71K - $91K/yr

Conduct Quality Assurance audits and routine checks, tests, gauging and instrument inspections of ... Inspects incoming jobs from sub-contractors for quality and product integrity. * Performs in ...

UEC Electronic

Quality Manager

Rochester, NY

... full-time on-site presence at our Rochester, NY location. The Quality Manager leads the organization's Quality Management System (QMS), oversees Quality Assurance operations, and drives Quality ...

Syntec Optics

Quality Inspector

Rochester, NY · On-site

Conduct Quality Assurance audits and routine checks, tests, gauging and instrument inspections of ... Inspects incoming jobs from sub-contractors for quality and product integrity. * Performs in ...

Syntec Optics

Quality Inspector

Rochester, NY · On-site

Conduct Quality Assurance audits and routine checks, tests, gauging and instrument inspections of ... Inspects incoming jobs from sub-contractors for quality and product integrity. * Performs in ...

UEC Electronics, LLC

Quality Manager

Rochester, NY · On-site

About the Role This role requires full-time on-site presence at our Rochester, NY location. The Quality Manager leads the organization's Quality Management System (QMS), oversees Quality Assurance ...

UEC ELECTRONICS, LLC

Quality Manager

Rochester, NY · On-site

About the Role This role requires full-time on-site presence at our Rochester, NY location. The Quality Manager leads the organization's Quality Management System (QMS), oversees Quality Assurance ...

Unlimited Technology

Build Analyst

Rochester, NY · On-site

$75K - $85K/yr

... contractor, and we are growing at a rapid pace. We have a wide range of talented and experienced ... Works closely with Infrastructure Managers, designers, and QA Test Teams to oversee the ICT build ...

Gallo

Quality Technician

Canandaigua, NY · On-site

$20 - $26.95/hr

Job Req ID: 107301 Job Type: Full-time Work Category: Onsite, Sponsorship: Not Available ... quality assurance experience reflecting increasing levels of responsibility. OR Associate of ...

E. & J. Gallo

Quality Technician

Canandaigua, NY · On-site

$20 - $26.95/hr

Job Req ID: 107301 Job Type: Full-time Work Category: Onsite, Sponsorship: Not Available ... quality assurance experience reflecting increasing levels of responsibility. OR Associate of ...

Gallo

Quality Technician

Canandaigua, NY · On-site

$20 - $26.95/hr

Job Req ID: 107301 Job Type: Full-time Work Category: Onsite, Sponsorship: Not Available ... quality assurance experience reflecting increasing levels of responsibility. OR Associate of ...

Keurig Dr Pepper

Quality Supervisor

Williamson, NY · On-site

$70K - $95K/yr

This is a full time position on our 3rd shift working 10:00pm to 6:30am, Monday-Friday. Flexibility ... Provide leadership and direction to QA Techs by managing the workload, training and employee ...

Keurig Dr Pepper

Quality Supervisor

Rochester, NY · On-site

$70K - $95K/yr

This is a full time position on our 3rd shift working 10:00pm to 6:30am, Monday-Friday. Flexibility ... Provide leadership and direction to QA Techs by managing the workload, training and employee ...

next page

Showing results 1-20

All JobsQuality Assurance Contractor JobsFull Time Quality Assurance Contractor JobsFull Time Quality Assurance Contractor Jobs in Rochester, NY

Full Time Quality Assurance Contractor information

See Rochester, NY salary details

$37.5K

$116.5K

$176.6K

How much do full time quality assurance contractor jobs pay per year?

As of Aug 20, 2026, the average yearly pay for full time quality assurance contractor in Rochester, NY is $116,500.00, according to ZipRecruiter salary data. Most workers in this role earn between $81,900.00 and $142,600.00 per year, depending on experience, location, and employer.

What is the difference between Full Time Quality Assurance Contractor vs Quality Assurance Specialist?

AspectFull Time Quality Assurance ContractorQuality Assurance Specialist
Employment TypeContract-based, temporary or project-specificFull-time, permanent position
CredentialsTypically requires QA certifications and relevant experienceUsually requires QA certifications, degree in related field
Work EnvironmentWorks on specific projects, often remotely or on-siteIntegrated into ongoing teams, on-site or hybrid
Employer UsageHired by companies for specific projects or periodsEmployed directly by the company as a permanent staff member

In summary, a Full Time Quality Assurance Contractor is hired for specific projects on a temporary basis, often with contract terms, while a Quality Assurance Specialist is a permanent employee involved in ongoing quality processes within the organization.

What are popular job titles related to Full Time Quality Assurance Contractor jobs in Rochester, NY?

For Full Time Quality Assurance Contractor jobs in Rochester, NY, the most frequently searched job titles are:

What job categories do people searching Full Time Quality Assurance Contractor jobs in Rochester, NY look for?

The top searched job categories for Full Time Quality Assurance Contractor jobs in Rochester, NY are:

What cities near Rochester, NY are hiring for Full Time Quality Assurance Contractor jobs?

Cities near Rochester, NY with the most Full Time Quality Assurance Contractor job openings:

Full Time Quality Assurance Contractor jobs near you

Quality Assurance Engineer

Relative Dynamics

Rochester, NY • On-site

Full-time

Re-posted 20 days ago

Job description

At Relative Dynamics we value knowledge as a process rather than knowledge as an answer. Founded in 2011 our goal is to define the new space era by continuously pushing the boundaries of engineering models services and technology development. Visit us at www.relativedynamics.space.
Relative Dynamics Inc. has an exciting opportunity for a Quality Assurance support primarily at supplier locations to perform quality surveillance activities and hardware quality assurance functions.
Periodic non-local travel is anticipated to accomplish delegated functions such as pre-cap inspections, technical or status interchange meetings (TIMs) or reviews, key supplier hardware inspections (government mandatory inspection points), project milestone reviews, and unplanned required travel as requested by the Quality Manager and/or CSO.
Work coverage may be required during evening and weekend shifts.
What You'll Get to Do:
The QE is responsible for reviewing processes such as:
  • Printed Circuit Board quality assessment
  • Workmanship including coatings
  • Soldering
  • ESD controls
  • Clean room activities and controls
  • Cable and harness fabrication
  • Contamination control
  • Parts and materials control
  • Control of drawings and procedures
  • Equipment moves (e.g. slings, cranes, and hydro sets)
  • Hazardous operations
  • Contractor responses to corrective action requests
  • Build records, end-item data packages
  • Delivery, storage and transport of flight and non-flight hardware, and critical ground support equipment (GSE)
  • Support Spacecraft transportation planning
  • Spacecraft readiness review(s); pre-ship to launch site
  • Spacecraft transport to launch site monitor; purge, battery health and dynamics
  • Launch site processing, Post-Ship Aliveness Testing, Anomaly Resolution, Site
  • Movements, Spacecraft Fueling, GSE Compliance, Spacecraft to Launch
  • Vehicle Adapter Final Torque verifications, Red/Green Tag verifications,
  • Ordnance installations, Final Closeouts, Final Fairing Installation Inspections

The QE will ensure that flight hardware and software anomalies, corrective actions, and re-verifications are documented in accordance with the developers� non-conformance and corrective action system. The QE will participate in production planning, when possible, review manufacturing flow plans and participate in Manufacturing and Test Readiness Reviews (MRRs and TRRs). The QE will monitor contractor quality and safety controls, and participate in quality assurance activities during fabrication, integration, and tests. The QE monitoring will apply to process implementations, product inspection during production, recording of key process data, witness of the set up (e.g., equipment check outs, safe connector mating, reconfiguring or moving mission hardware) and execution of key tests, supplier conformance with quality engineering and project management approval requirements (e.g., red-lines, approval to proceed, signing off on work orders), labs and personnel certifications, traceability of calibration certifications to calibration plans, capture of test results and instances of product or process nonconformance, protection of product, isolation and preservation of non-conforming items to assure effective root cause or failure analysis, and witnessing of close calls or mishap events.
The QE will perform inspections which may include:
  • Pre-cap inspection of hybrid micro circuits and electronic boxes.
  • 100% solder joints prior to conformal coating of each flight printed wiring assembly prior to conformal coating.
  • 100% of conformal coatings on flight printed wiring assemblies.
  • Final workmanship inspection prior to box level final closure prior to integration into the next level of assembly.
  • Connector mates to mission hardware integrated into the spacecraft.
  • General workmanship quality prior to final acceptance testing.
  • General workmanship prior to shipment.
  • Confirm shipping packaging conforms to requirements and is adequate.

What You'll Need:
  • Fifteen (15) + years� experience in manufacturing, assembly and/or quality assurance of space flight hardware.
  • Experience working/supporting critical path FRB's for a previous NASA project.
  • Experience, and be able to perform for long hours, in a cleanroom environment and able to spend long periods of time standing in the cleanroom.
  • Familiar with supplier quality management operations, requirements flow-down and compliance, and performance data accumulation and analysis tools and techniques.
  • Familiar with ISO 9001 and AS9100.
  • Experience preferably at NASA with direct working experience with the following standards and requirements:
  • IPC J-STD-001ES/FS (Soldering, Space Addendum)
  • NASA-STD-8739.1 (Staking and Conformal Coating)
  • NASA-STD-8739.4 or IPC/WHMA-A-620xS (Crimping, Cables & Wiring)
    ANSI/ESD 20.20 (Electrostatic Discharge)
  • NASA-STD-8739.6 (Workmanship Implementation Standard)

Required Skills
To perform this job successfully, an individual should have good working knowledge of the full suite of Microsoft Office and the ability to remotely access GSFC database and other online knowledge management tools (e.g., Meta). They must possess diplomatic sensitivities relative to programmatic risk management and contractual relationships, strong verbal and written communication skills, and a technical problem-solving background with strong analytical skills. The QE must be able to work side-by-side with other mission assurance personnel (e.g., Prime Contractor, subcontractors, GSFC civil servants, GSFC contractors, DCMA). The assigned QE must have familiarity with the applicable Project MAR and the technical quality standards invoked therein.
What You Won't Do:
  • Feel stuck as we offer great opportunities to advance and learn
  • Feel like a number as we're a close-knit bunch and always have each other's backs

Who You Are:
  • A self-starter who thrives in a fast-paced environment
  • A quick learner who is always ready to gain depth of knowledge
  • A reliable worker who knows the importance of showing up when it counts
  • Accept assignments with open cooperative positive and team-oriented attitudes
  • Able to plan and execute plans across teams
  • Effective communicator both written and verbal

Relative Dynamics conducts a comprehensive background check that includes drug testing. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, national origin, gender identity, sexual orientation, age, marital status, veteran status or disability status.

Apply