ZipRecruiter

Log In

2

Full Time First Article Inspector Jobs in Rochester, NY

Tokai Carbon GS

Manufacturing Engineer

Rochester, NY · On-site

$70K - $91K/yr

Program, set up, and validate CMM inspection routines for first-article inspection, in-process checks, and final inspection. * Program and operate laser tracking systems for large-part inspection ...

Syntec Optics

Senior CMM Programmer

Rochester, NY · On-site

Troubleshoot and resolve complex programming and measurement issues; approve final programs and first article inspections. * Drive continuous improvement initiatives focused on reducing cycle times ...

Graham Corporation

Quality Engineer II

Batavia, NY · On-site

$78K - $100K/yr

Conduct first article inspections (FAI), and final inspections. * Serve as primary contact for customer quality inquiries, audits, and meetings. * Facilitate and escort customer and regulatory ...

Graham Manufacturing

Quality Engineer II

Batavia, NY · On-site

$78K - $100K/yr

Conduct first article inspections (FAI), and final inspections. * Serve as primary contact for customer quality inquiries, audits, and meetings. * Facilitate and escort customer and regulatory ...

Graham Manufacturing

Quality Engineer II

Batavia, NY

$78K - $100K/yr

Conduct first article inspections (FAI), and final inspections. * Serve as primary contact for customer quality inquiries, audits, and meetings. * Facilitate and escort customer and regulatory ...

Addman Engineering LLC

Molds Engineer

Ontario, NY · On-site

Coordinates mold samples required to qualify new tools and the first article inspection. Ensures mold qualification requirements and customers mold approval needs are met. Communicates with customer ...

Aerotek

Quality Technician

Rochester, NY · On-site

$20 - $30/hr

First article, in-process, and final inspections. * Quality documentation and recordkeeping. * Calibration programs and inspection equipment maintenance. * Non-conformance reporting and root cause ...

Oetiker

Quality Inspector

Batavia, NY · On-site

First piece inspections & reporting * Customer and supplier PPAP dimensional layouts * Examines ... This is a full-time position with hours starting at 8:00am and ending at 4:30pm, M-F (40 hours/week)

Oetiker

Quality Inspector

Batavia, NY · On-site

$40K - $59K/yr

First piece inspections & reporting * Customer and supplier PPAP dimensional layouts * Examines ... This is a full-time position with hours starting at 8:00am and ending at 4:30pm, M-F (40 hours/week)

Oetiker

Quality Inspector

Batavia, NY · On-site

$40K - $59K/yr

First piece inspections & reporting * Customer and supplier PPAP dimensional layouts * Examines ... This is a full-time position with hours starting at 8:00am and ending at 4:30pm, M-F (40 hours/week)

Oetiker

Quality Inspector

Batavia, NY · On-site

$59K/yr

First piece inspections & reporting * Customer and supplier PPAP dimensional layouts * Examines ... This is a full-time position with hours starting at 8:00am and ending at 4:30pm, M-F (40 hours/week)

Connect with Oetiker

Quality Inspector

Batavia, NY · On-site

First piece inspections & reporting * Customer and supplier PPAP dimensional layouts * Examines ... This is a full-time position with hours starting at 8:00am and ending at 4:30pm, M-F (40 hours/week)

previous page

Showing results 41-60

All JobsFirst Article Inspector JobsFull Time First Article Inspector JobsFull Time First Article Inspector Jobs in Rochester, NY

Full Time First Article Inspector information

See Rochester, NY salary details

$12

$26

$51

How much do full time first article inspector jobs pay per hour?

As of Aug 20, 2026, the average hourly pay for full time first article inspector in Rochester, NY is $26.99, according to ZipRecruiter salary data. Most workers in this role earn between $18.27 and $31.06 per hour, depending on experience, location, and employer.

What does a full time first article inspector do?

A Full Time First Article Inspector is responsible for conducting detailed inspections on the first manufactured item in a production run, known as the 'first article.' Their main job is to ensure that this initial product meets all required specifications, drawings, and quality standards before mass production begins. This process helps identify and correct any issues early, preventing costly mistakes and ensuring consistent product quality. Full Time First Article Inspectors often use measuring tools, review documentation, and work closely with engineering and production teams. Their work is crucial in industries like aerospace, automotive, and manufacturing where precision and compliance are vital.

What are some common challenges faced by full time first article inspectors and how can they be addressed?

Full Time First Article Inspectors often encounter challenges such as interpreting complex engineering drawings, ensuring precise measurements, and managing tight production schedules. Effective communication with engineering and production teams is crucial to resolve discrepancies and clarify requirements. Staying organized and using up-to-date inspection tools can help manage workload and maintain accuracy. Proactive collaboration and ongoing training in quality standards are valuable for overcoming these challenges and excelling in this role.

What are the key skills and qualifications needed to thrive as a full time first article inspector, and why are they important?

To thrive as a Full Time First Article Inspector, you need a solid understanding of quality control procedures, blueprint reading, and precision measurement, often supported by experience in manufacturing or a related certification. Familiarity with inspection tools such as calipers, micrometers, CMMs, and quality management systems (QMS) is typically required. Attention to detail, analytical thinking, and effective communication are crucial soft skills for accurate reporting and collaboration with production teams. These skills ensure that products meet stringent standards and regulatory requirements, minimizing defects and supporting overall manufacturing quality.

What is the difference between Full Time First Article Inspector vs Quality Control Inspector?

AspectFull Time First Article InspectorQuality Control Inspector
CertificationsOften requires inspection certifications, such as ASQ certificationsMay require general quality assurance or inspection certifications
Work EnvironmentPrimarily in manufacturing or production settings, focusing on initial product samplesIn various manufacturing environments, inspecting ongoing production
Employer & Industry UsageCommon in aerospace, automotive, and electronics industriesWidely used across multiple manufacturing sectors

The Full Time First Article Inspector specializes in inspecting initial product samples to ensure design compliance before mass production, often requiring specific certifications. In contrast, the Quality Control Inspector performs ongoing inspections throughout the manufacturing process to maintain quality standards. While both roles focus on quality assurance, the First Article Inspector emphasizes initial sample approval, whereas the Quality Control Inspector oversees ongoing production quality.

What are the most commonly searched types of First Article Inspector jobs in Rochester, NY?

The most popular types of First Article Inspector jobs in Rochester, NY are:

Full Time First Article Inspector jobs near you

Quality Control Technician

Mcalpin Industries Inc

Rochester, NY • On-site

$28 - $34/hr

Full-time

Posted 2 days ago

New

Job description

Description:

General Job Summary:

Performs part inspections at all phases of production. Supports Quality Engineering and Engineering with creating documentation for new product. Develops inspection programs for CMM inspection.


Requirements:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions.

  • Follows all safety processes and procedures in accordance with the job and company policy
  • Understands and follows all quality procedures
  • Inspects parts for 1st piece, receiving, finals, and in-process Quality inspections
  • Completes First Article Inspection reports and capability study measurements
  • Develops inspection programs on the CMM/Vision system/Faro arm/Virtek
  • Supports Quality Engineering with quality documents: FAIR template setup, PPAP documents, certifications, capability study reports, etc.
  • Supports Engineering with creating manufacturing process control documents and quality plans using SolidWorks
  • Assists in dispositioning product with quality issues, creating NCMRs, and setting up rework operations

Education Experience

High school diploma or general education degree (GED). 3-5 years related experience or training

Associate’s degree (A.A.) preferred.

ASQ Certification preferred or equivalent combination of education and experience.


Computer Skills:

To perform this job successfully, an individual should have working knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, and Internet Explorer. Familiar with CMM programming software. SolidWorks experience preferred. Minitab experience a plus.


Other Requirements:

Sheet metal fabrication experience preferred. Understanding and utilization of micrometers, verniers and scales (rulers), height gauges, protractors and optical comparators and coordinate measuring machines (CMM/PC-DMIS). Must have working knowledge of GD&T. Strong math skills with an emphasis on trigonometry and be able to work in inches and millimeters. Advanced measuring equipment (Romer arm, Faro arm, Virtek) experience helpful.


Physical Demands:

The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job the Associate is regularly required to walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel and lift and/or move up to 50 pounds and parts sizes of 3’ x 3’.


PPE:

Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. Hearing protection is required in designated areas.


Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment.

While performing the duties of this job the employee is regularly exposed to wet and/or humid conditions; extreme heat; and extreme cold and the noise level in the work environment is usually loud.