ZipRecruiter

Log In

2

Full Time First Article Inspector Jobs in Hebron, KY

TransPak

Quality Supervisor

Hebron, KY · On-site

$75K - $85K/yr

These processes include but are not limited to receiving inspection, in-process inspection, final inspection, first article inspection (FAI), internal auditing, CAPA and feedback to management. The ...

transpak

Quality Supervisor

Hebron, KY · On-site

These processes include but are not limited to receiving inspection, in-process inspection, final inspection, first article inspection (FAI), internal auditing, CAPA and feedback to management. The ...

StandardAero

Engineer, Quality

Cincinnati, OH · On-site

$69K - $89K/yr

Thorough knowledge of First Article Inspections/AS9102. * Effective communicator in both verbal and technical writing. * Ability to read, understand, and interpret blueprints or technical figures.

StandardAero

Engineer, Quality

Cincinnati, OH · On-site

$69K - $89K/yr

Thorough knowledge of First Article Inspections/AS9102. * Effective communicator in both verbal and technical writing. * Ability to read, understand, and interpret blueprints or technical figures.

KPI Solutions

Controls Engineer Manager

Cincinnati, OH · On-site +1

$81K - $105K/yr

... first article inspections. 11. Oversee Electrical and controls subcontractors. Requirements Required Qualifications: 1. Bachelor's degree in engineering (Electrical, Controls, Mechatronics ...

StandardAero

Engineer, Quality

Cincinnati, OH

$69K - $89K/yr

Thorough knowledge of First Article Inspections/AS9102. * Effective communicator in both verbal and technical writing. * Ability to read, understand, and interpret blueprints or technical figures.

StandardAero

Engineer, Quality

Cincinnati, OH · On-site

$69K - $89K/yr

Thorough knowledge of First Article Inspections/AS9102. * Effective communicator in both verbal and technical writing. * Ability to read, understand, and interpret blueprints or technical figures.

KPI Solutions

Controls Engineer Manager

Cincinnati, OH · On-site

$80K - $103K/yr

Support vendor factory acceptance testing or first article inspections. 11.Oversee Electrical and controls subcontractors. Requirements Required Qualifications: 1.Bachelor's degree in engineering ...

The Metalworking Group

CNC Machinist

Cincinnati, OH · On-site

$19.75 - $27/hr

Inspect parts and fine tune to ensure consistent part quality throughout every production run. * Program and setup machines to produce first article parts. * Performing basic preventive maintenance ...

Renk

Machinist - CNC Lathe Turning

Cincinnati, OH · On-site

$21.50 - $27.25/hr

... first-article, in-process, and final part inspections using precision measuring tools. * Waste ... Must be authorized to work in the US Full-Time/Part-Time Full-Time Exempt/Non-Exempt Non-Exempt EOE ...

previous page

Showing results 41-60

All JobsFirst Article Inspector JobsFull Time First Article Inspector JobsFull Time First Article Inspector Jobs in Hebron, KY

Full Time First Article Inspector information

See Hebron, KY salary details

$12

$26

$50

How much do full time first article inspector jobs pay per hour?

As of Aug 10, 2026, the average hourly pay for full time first article inspector in Hebron, KY is $26.38, according to ZipRecruiter salary data. Most workers in this role earn between $17.84 and $30.34 per hour, depending on experience, location, and employer.

What is the difference between Full Time First Article Inspector vs Quality Control Inspector?

AspectFull Time First Article InspectorQuality Control Inspector
CertificationsOften requires inspection certifications, such as ASQ certificationsMay require general quality assurance or inspection certifications
Work EnvironmentPrimarily in manufacturing or production settings, focusing on initial product samplesIn various manufacturing environments, inspecting ongoing production
Employer & Industry UsageCommon in aerospace, automotive, and electronics industriesWidely used across multiple manufacturing sectors

The Full Time First Article Inspector specializes in inspecting initial product samples to ensure design compliance before mass production, often requiring specific certifications. In contrast, the Quality Control Inspector performs ongoing inspections throughout the manufacturing process to maintain quality standards. While both roles focus on quality assurance, the First Article Inspector emphasizes initial sample approval, whereas the Quality Control Inspector oversees ongoing production quality.

What are the key skills and qualifications needed to thrive as a full time first article inspector, and why are they important?

To thrive as a Full Time First Article Inspector, you need a solid understanding of quality control procedures, blueprint reading, and precision measurement, often supported by experience in manufacturing or a related certification. Familiarity with inspection tools such as calipers, micrometers, CMMs, and quality management systems (QMS) is typically required. Attention to detail, analytical thinking, and effective communication are crucial soft skills for accurate reporting and collaboration with production teams. These skills ensure that products meet stringent standards and regulatory requirements, minimizing defects and supporting overall manufacturing quality.

What are some common challenges faced by full time first article inspectors and how can they be addressed?

Full Time First Article Inspectors often encounter challenges such as interpreting complex engineering drawings, ensuring precise measurements, and managing tight production schedules. Effective communication with engineering and production teams is crucial to resolve discrepancies and clarify requirements. Staying organized and using up-to-date inspection tools can help manage workload and maintain accuracy. Proactive collaboration and ongoing training in quality standards are valuable for overcoming these challenges and excelling in this role.

What does a full time first article inspector do?

A Full Time First Article Inspector is responsible for conducting detailed inspections on the first manufactured item in a production run, known as the 'first article.' Their main job is to ensure that this initial product meets all required specifications, drawings, and quality standards before mass production begins. This process helps identify and correct any issues early, preventing costly mistakes and ensuring consistent product quality. Full Time First Article Inspectors often use measuring tools, review documentation, and work closely with engineering and production teams. Their work is crucial in industries like aerospace, automotive, and manufacturing where precision and compliance are vital.
What are the most commonly searched types of First Article Inspector jobs in Hebron, KY? The most popular types of First Article Inspector jobs in Hebron, KY are:
What are popular job titles related to Full Time First Article Inspector jobs in Hebron, KY? For Full Time First Article Inspector jobs in Hebron, KY, the most frequently searched job titles are:
What job categories do people searching Full Time First Article Inspector jobs in Hebron, KY look for? The top searched job categories for Full Time First Article Inspector jobs in Hebron, KY are:
Full Time First Article Inspector jobs near you
Infographic showing various Full Time First Article Inspector job openings in Hebron, KY as of August 2026, with employment types broken down into 1% As Needed, 76% Full Time, 19% Part Time, and 4% Contract. Highlights an 87% Physical, 1% Hybrid, and 12% Remote job distribution, with an average salary of $54,860 per year, or $26.4 per hour.

Quality Systems Manager

Precision Products Group, Inc.

Cincinnati, OH • On-site

Full-time

Medical, Retirement, PTO

Re-posted 8 days ago

Job description

Quality Systems Manager
Job Location: Cincinnati, OH or Fort Wayne, IN
Reports to: Chief Operating Officer
About PPG
Precision Products Group (PPG) is a growing global leader in converting niche engineered materials for electrical, aerospace & defense, medical, and industrial markets. As a part of our ongoing commitment to continuous improvement and quality, we are introducing a new Quality Systems Manager role to build our quality system capabilities and assist in scaling our operations across the enterprise. Precision Products Group operates across multiple company divisions and brands, which include Cindus Corporation, Paramount Tube, Breyden Products, Saylor Technical Products, and Euclid Medical.
Role Overview
We are seeking an experienced Quality Systems Manager to lead the quality program and continually enhance the processes and systems that support the manufacturing operations and drive superior quality across the enterprise. This role has both strategic and tactical components and will require a hands-on approach in partnering with the operations team, engineering team, supply chain, and customers. Being comfortable and exceling in a 'coach/player' capacity is essential, while being the leader of the quality program. This role will establish, govern, and continuously improve our integrated quality management system across all business units, with particular emphasis on compliance with ISO 9001:2015 and AS9100 Rev D standards. The Quality System Manager will be highly collaborative cross-functionally within the organization and is a critical resource for the company to achieve aggressive growth targets. Experience in aerospace or defense manufacturing environments, with hand-on experience with highly engineered materials is ideal.
Key Responsibilities
Quality Management System (QMS) Leadership
  • Develop, enhance, maintain, and continuously improve the enterprise-wide Quality Management System in full conformance with ISO 9001:2015 and AS9100 Rev D requirements.
  • Provides leadership and support to each operating location and takes ownership of the full scope of quality systems management, including training and development of key resources.
  • Serve as the primary management representative for all quality standard certifications, including interfacing with registrars, third-party auditors, and customer source inspection teams.
  • Translate strategic quality objectives into measurable policies, procedures, work instructions, and control plans across all facilities and product lines.
  • Drive and sustain a culture of quality excellence from the shop floor to the executive suite, championing a prevention-first mindset over detection and rework.
  • Drives cultural and process transformation across geographically distributed teams.
  • Makes decisions grounded in objective quality data while exercising sound engineering judgement.
  • Identifies opportunities for improvement and leads Kaizen events to support and sustain continuous improvement efforts to achieve superior quality results.

Compliance, Auditing, & Certification
  • Plan, execute, and manage internal audit programs; lead surveillance and recertification audits with external registrars for ISO 9001:2015 and AS9100 Rev D.
  • Ensure ongoing compliance with applicable regulatory and customer-specific requirements including FAA/EASA and prime contractor flow-downs (e.g. Boeing D6-82479, Lockheed Martin LMA-QA, and Raytheon RL-QA).
  • Lead responses to Corrective Action Requests (CARs), supplier corrective actions (SCARs), and customer escapes; ensure root cause analysis and sustainable closure.
  • Maintain document control systems and records management practices that satisfy audit trail and traceability requirements.
  • Coordinate with operations and engineering to ensure that recordkeeping systems and documentation processes are developed and utilized by the production teams.

Supplier Quality & Supply Chain
  • Partner with PPG supply chain to develop supplier relationships that de-risk the business, qualify new suppliers, support current supplier improvements, conduct supplier qualification audits, supplier performance reviews, and development activities.
  • Coordinate with product development, supply chain, and operations to establish incoming inspection standards, first article inspection (FAI/AS9102) processes, and source inspection requirements.
  • Collaborate cross-functionally in real-time with sales, product development, procurement and engineering to mitigate supply chain quality risk and respond to changing conditions in the market, including counterfeit parts prevention (AS5553/AS6174 compliance).
  • Assist in resolving supplier issues related to quality and ensuring ongoing continuous improvement in the management of supply chain resources and raw materials.

Engineering Materials & Process Quality
  • Provide QA/QC oversight for engineered and advanced materials including composites, adhesives, coatings, and heat-treated or surface-treated components.
  • Partner with internal stakeholders to qualify new materials, processes, and special processes per applicable specifications.
  • Oversee nonconforming material controls, deviation/waiver processes, and engineering disposition to prevent unauthorized use of out-of-compliance materials.
  • Communicates quality performance and risks clearly to board-level and customer leadership audiences.

Inspection, Testing, & Metrology
  • Direct incoming, in-process, and final inspection functions; establish acceptance criteria, sampling plans (per ANSI/ASQ Z1.4 / Z1.9), and inspection traveler requirements.
  • Manage the Calibration and Measurement System (MSA/GR&R) program; ensure all measurement equipment is traceable to NIST standards.
  • Champion application of advanced quality tools: APQP, PPAP, FMEA, Control Plans, SPC, and 8D problem-solving.

Team Leadership & Development
  • Build, lead, and mentor a high-performing quality organization spanning multiple sites; define roles, critical competencies, and career development pathways.
  • Establish and report quality KPIs to executive leadership: PPM, DPMO, Cost of Poor Quality (COPQ), on-time audit closure, first-pass yield, and customer satisfaction metrics.
  • Serve as the executive sponsor for quality improvement projects.
  • Translates long-range quality strategy into tactical actionable plans and measurable outcomes.
  • Instills ownership at every level of the organization; holds self and team accountable to the highest standards of performance and integrity.
  • Builds strong cross-functional partnerships with engineering, operations, procurement, and program management.

Qualifications & Technical Skills
  • Bachelor's degree in Engineering, Materials Science, Quality Management, or related field; advanced degree preferred.
  • 10+ years of progressive quality management experience, including leadership roles, with at least 5 years in a senior or corporate quality leadership role.
  • Demonstrated hands-on expertise implementing and maintaining both ISO 9001:2015 and AS9100 Rev D quality management systems.
  • Expert level knowledge of AS9100 Rev D, ISO 9001:2015, and associated aerospace & defense regulatory requirements.
  • Proficiency with core quality methodologies: APQP, FMEA, MSA, SPC, PPAP, 8D, and Lean/Six Sigma.
  • Familiarity with government and prime contractor quality requirements: MIL-STDs and major prime flow-down clauses.
  • Excellent analytical, data analysis, and problem-solving abilities.
  • Highly skilled in communication, project management, and stakeholder management.
  • Significant industry experience within aerospace, defense, or precision manufacturing environments.
  • Direct experience with engineered materials - composites, specialty coatings, or similar - in a production or testing context.
  • Proven experience in partnering across the enterprise to deliver strong quality management systems and develop a culture of high-quality performance.
  • Proven track record managing successful external certification audits, with zero major findings.
  • Experience with ERP/MES/QMS software platforms and statistical analysis tools (experience with Made2Manage or Winman preferred).
  • Experience in both aerospace OEM and Tier 1 & 2 supplier environments (preferred).
  • Familiarity with ITAR and export control requirements as they relate to quality documentation (preferred).
  • Experience with digital quality transformation initiatives - eQMS, MBD, and model-based inspection (preferred).
  • Background with composite structures, additive manufacturing (AM) materials qualification, or other emerging engineered materials platforms (preferred).
  • Experience working within small-to-mid-sized companies that are PE-owned (preferred).

Certifications
  • ASQ Certified Quality Manager (CQM/OE), Certified Quality Engineer (CQE), or Certified Quality Auditor (CQA) - at least one certification is required.
  • ISO 9001:2015 / AS9100 Rev D Lead Auditor certification (RABQSA/Exemplar Global or equivalent) strongly preferred.

Travel
Up to 25% travel to manufacturing sites, suppliers, and corporate office. Valid passport required as there may be some international travel.
What We Offer
  • Competitive compensation
  • Robust benefits options (PPO and HSA options)
  • 401K with company match
  • Generous paid time off (PTO) and holidays
  • Highly engaged culture that recognizes and rewards high performance
  • Opportunities for career progression and to make immediate impacts on our business

Apply