ZipRecruiter

Log In

1

Freelance First Article Inspection As9102 Jobs in San Ramon, CA

Kelly Services

Quality Inspector

Newark, CA

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

Support First Article Inspection validation and prepare AS9102-compliant inspection documentation. * Inspect production lots required for supplier qualification, including two consecutive defect-free ...

Laborup

CMM Programmer & Quality Inspector

San Jose, CA · On-site

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

Support AS9102 First Article Inspection (FAI) requirements. * Inspect complex 3-axis, 4-axis, and 5-axis machined components . * Perform dimensional inspections using CMM equipment and conventional ...

Laborup

CMM Programmer & Quality Inspector

San Jose, CA · On-site

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

Support AS9102 First Article Inspection (FAI) requirements. * Inspect complex 3-axis, 4-axis, and 5-axis machined components . * Perform dimensional inspections using CMM equipment and conventional ...

Laborup

CMM Programmer & Quality Inspector

San Jose, CA

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

Support AS9102 First Article Inspection (FAI) requirements. * Inspect complex 3-axis, 4-axis, and 5-axis machined components . * Perform dimensional inspections using CMM equipment and conventional ...

Laborup

CMM Quality Inspectors

San Jose, CA

$34 - $37/hr

First Article Inspection: Run FAIs and build detailed dimensional reports. * Blueprint Review: Interpret drawings, GD&T, and customer specs before inspecting. * In-Process Inspection: Check parts ...

Archer

Sr. Product Quality Engineer

San Jose, CA

$126K - $150K/yr

Conduct or support First Article Inspection in compliance with SAE AS9102 * Facilitate and support Material Review Board dispositions * Identify, lead, and support continuous improvement initiatives ...

Archer

Sr Product Quality Engineer

San Jose, CA · On-site

$126K - $150K/yr

... First Article Inspection in compliance with SAE AS9102 Facilitate and support Material Review Board dispositions Identify, lead, and support continuous improvement initiatives for powertrain ...

Archer

Sr. Product Quality Engineer

San Jose, CA · On-site

$126K - $150K/yr

Conduct or support First Article Inspection in compliance with SAE AS9102 * Facilitate and support Material Review Board dispositions * Identify, lead, and support continuous improvement initiatives ...

Astranis

Production Quality Engineer

San Francisco, CA · On-site

$84K - $109K/yr

Perform and support quality functions such as nonconformance resolution, first article inspection, root cause analysis, corrective actions, containments, statistical process control, etc.

Sierra Circuits

QA Inspector

San Jose, CA · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • PTO

First Article Inspection (FAI): Perform SMT FAI (pre-reflow & post-reflow) and PTH FAI. Complete the FAI report or AS9102 as requested for Aerospace products. * Traveler and Certificate of ...

Aviso, LLC

CMM INSPECTOR

Fremont, CA · On-site

$28 - $30/hr

Generate, review, and archive accurate inspection reports, first-article inspection (FAI) reports, and dimensional test data. * Non-Conformance Reporting (NCR): Identify, segregate, and document out ...

next page

Showing results 1-20

All JobsFirst Article Inspection As9102 JobsFreelance First Article Inspection As9102 JobsFreelance First Article Inspection As9102 Jobs in San Ramon, CA

Freelance First Article Inspection As9102 information

See San Ramon, CA salary details

$16

$53

$147

How much do freelance first article inspection as9102 jobs pay per hour?

As of Aug 18, 2026, the average hourly pay for freelance first article inspection as9102 in San Ramon, CA is $53.31, according to ZipRecruiter salary data. Most workers in this role earn between $27.12 and $69.04 per hour, depending on experience, location, and employer.

What is a freelance First Article Inspection AS9102?

A Freelance First Article Inspection (FAI) AS9102 professional is an independent quality inspector who performs detailed inspections of the first manufactured part in a production run, following the AS9102 standard. This standard is specific to the aerospace industry and ensures that parts meet all design specifications before full-scale production begins. Freelancers in this role are typically contracted by aerospace manufacturers or suppliers to verify compliance, document inspection results, and help prevent costly defects down the line. Their work is crucial for maintaining high quality and safety standards in aerospace manufacturing.

What are the key skills and qualifications needed to thrive as a freelance First Article Inspection AS9102 specialist?

To excel as a Freelance First Article Inspection AS9102 specialist, you need a solid understanding of quality assurance, manufacturing processes, and familiarity with AS9102 standards, often supported by relevant engineering or technical qualifications. Proficiency with inspection tools, CAD software, measurement devices, and quality management systems is typically required. Strong attention to detail, effective communication, and problem-solving skills help you accurately document findings and collaborate with clients. These skills ensure compliance with aerospace industry standards, minimize defects, and build client trust in your inspection services.

What are the common challenges faced by freelance First Article Inspection AS9102 inspectors, and how can they be addressed?

Freelance First Article Inspection inspectors working with AS9102 standards often encounter challenges such as interpreting complex engineering drawings, ensuring timely communication with clients, and adapting to different manufacturing processes. As contractors, they may need to quickly familiarize themselves with various companies' documentation and quality requirements. Building strong organizational skills, maintaining clear records, and proactively seeking clarification on ambiguous requirements can help inspectors deliver accurate and compliant reports. Effective communication with engineering and quality teams is also essential for resolving discrepancies and ensuring the inspection process runs smoothly.

What is the difference between Freelance First Article Inspection As9102 vs Quality Inspector?

AspectFreelance First Article Inspection As9102Quality Inspector
CertificationsTypically requires AS9102 knowledge, sometimes certificationsOften holds general quality or industry-specific certifications
Work EnvironmentFreelance, project-based, often remote or on-site at manufacturing facilitiesFull-time or part-time, on-site at manufacturing or quality control departments
Industry UsagePrimarily aerospace and defense manufacturingVarious industries including aerospace, automotive, electronics

Freelance First Article Inspection As9102 specialists focus on conducting initial product inspections according to AS9102 standards, often working independently. Quality Inspectors perform ongoing quality checks across industries, with broader certification requirements. The main difference lies in the project-based, specialized nature of Freelance First Article Inspection As9102 versus the broader, continuous role of Quality Inspectors.

What cities near San Ramon, CA are hiring for Freelance First Article Inspection As9102 jobs?

Cities near San Ramon, CA with the most Freelance First Article Inspection As9102 job openings:

Freelance First Article Inspection As9102 jobs near you
Infographic showing various Freelance First Article Inspection As9102 job openings in San Ramon, CA as of August 2026, with employment types broken down into 1% As Needed, 77% Full Time, 17% Part Time, and 5% Contract. Highlights an 86% Physical, 2% Hybrid, and 12% Remote job distribution, with an average salary of $110,892 per year, or $53.3 per hour.

Quality Inspector

Kelly Services

Newark, CA

Contractor

Medical, Dental, Vision, Life, Retirement

Posted 13 days ago

Job description

Source Inspector, PCBA / IPC-A-610
IPC-610 Certified Inspector (Contract-to-hire or Direct based on Experience)
Overview
Joby Aviation is seeking a meticulous and technically skilled Quality Inspector to perform source inspections of Printed Circuit Board Assemblies (PCBAs) and electronic assemblies used in its eVTOL aircraft.
The Inspector will support Joby’s Supplier Industrialization Inspection Program by verifying supplier workmanship against approved drawings and specifications, supporting AS9102 First Article Inspection activities, and inspecting production lots required for supplier inspection qualification.
Inspections will primarily take place at the supplier manufacturing facility in Newark, California. Periodic travel to Joby facilities and other domestic or international supplier locations may be required.
IPC-A-610 is foundational to this role. The Inspector will apply IPC-A-610 acceptance standards to evaluate solder joints, component placement, cleanliness, conformal coating, marking, and overall workmanship. The Inspector will also provide guidance on PCBA acceptance requirements and work closely with Supplier Industrialization Engineering to address inspection findings.
Responsibilities
PCB / PCBA Inspection – Primary Focus
  • Inspect PCBAs to IPC-A-610 Class 2 and Class 3 acceptance standards.
  • Evaluate solder joints, component placement, cleanliness, conformal coating, marking, and overall workmanship.
  • Set up and operate 3D Automated Optical Inspection (AOI) equipment and review inspection results.
  • Perform digital X-ray inspection of BGA, QFN, and other hidden solder joints for voiding, bridging, and other defects.
  • Apply J-STD-001 requirements when evaluating soldering workmanship and nonconforming products.
  • Provide guidance to supplier production personnel on IPC-A-610 workmanship and acceptance requirements.
Supplier Inspection and Qualification Support
  • Perform source inspections at supplier manufacturing facilities against approved drawings, specifications, and workmanship requirements.
  • Support First Article Inspection validation and prepare AS9102-compliant inspection documentation.
  • Inspect production lots required for supplier qualification, including two consecutive defect-free lots when applicable.
  • Support supplier qualification, requalification, and surveillance activities.
  • Reinstate or perform additional source inspections following an escape, RMA, or confirmed supplier nonconformance.
  • Communicate inspection findings and acceptance requirements to suppliers and Joby teams.
Dimensional and General Inspection
  • Use calipers, pin gauges, vision systems, and other inspection tools to verify product dimensions.
  • Inspect purchased electronic and electromechanical components against purchase orders, drawings, specifications, and engineering requirements.
  • Verify material certifications, product identification, and applicable inspection requirements.
Documentation and Nonconformance
  • Document inspection results in the quality management system and maintain clear, auditable records.
  • Initiate and track nonconformance reports through the Material Review Board process.
  • Communicate inspection results, nonconformances, and dispositions to affected teams.
  • Maintain traceability of products, materials, production lots, and calibrated inspection equipment.
 
Required Qualifications
  • High school diploma, GED, or equivalent.
  • Three or more years of experience in electronics, PCBA assembly, or quality inspection.
  • Working knowledge of IPC-A-610 acceptance standards and J-STD-001 requirements.
  • Experience operating 3D Automated Optical Inspection equipment and reviewing inspection results.
  • Ability to read and interpret electronic assembly drawings, schematics, Bills of Materials, specifications, and work instructions.
  • Ability to use basic inspection tools and evaluate product workmanship.
  • Understanding of product, material, lot, and calibration traceability.
  • Ability to clearly document inspection results and communicate nonconformances.
  • Ability to work effectively with suppliers, engineering, manufacturing, quality, and supply chain teams.
  • Willingness and ability to travel within the United States.
 
Preferred Qualifications
  • Active IPC-A-610 Certified IPC Specialist or Certified IPC Trainer certification.
  • Experience performing source inspection at supplier manufacturing facilities.
  • Experience using digital X-ray equipment to inspect BGA, QFN, and other hidden solder joints.
  • Knowledge of AS9102 First Article Inspection requirements and FAI documentation.
  • Experience with supplier qualification, production-lot inspection, or reduced-inspection programs.
  • Experience with Keyence vision systems, CMMs, optical CMMs, Faro Arms, or Romer Arms.
  • Experience with PolyWorks or CMM programming.
  • ASQ Certified Quality Inspector or equivalent certification.
  • Basic knowledge of Statistical Process Control, including control charts and identifying out-of-control conditions.
  • Experience working in aerospace or another regulated manufacturing environment.
 
Employment Type
This position may be filled as either:
  • A full-time, direct hourly position with Joby Aviation; or
  • An initial six-month temporary contract through a staffing agency.
Contract extensions or conversion to direct employment may be considered based on performance, business needs, budget, and position approval.
 
Travel & Expense Reimbursement
Approved business travel expenses, including transportation, mileage, lodging, and meals, will be reimbursed in accordance with the applicable Joby Aviation or staffing agency travel policy.
Normal commuting expenses to the employee’s primary assigned work location are not reimbursable.
 
As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community.

Why Kelly® Engineering?

Your engineering skills are in demand, but how do you find the right fit? Easy. At Kelly Engineering, our team creates expert talent solutions to solve the world’s most critical challenges. We connect you with leading organizations where you can collaborate on innovative projects, work with cutting-edge technologies and accelerate your growth. Whether you prefer the variety and flexibility of short-term projects or are looking for a long-term opportunity, we’re here to guide you to the next step in your engineering career.

About Kelly

Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year.
Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.
Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.