ZipRecruiter

Log In

1

First Article Inspection Jobs in Georgia (NOW HIRING)

Intellectt INC

Manufacturing Engineer

Midland, GA · On-site

$65.40K - $84.30K/yr

Provide technical support during first article inspections (FAI), PPAPs, and supplier audits. * Continuously improve documentation processes and tools to enhance efficiency, traceability, and quality.

Intellectt INC

Manufacturing Engineer

Midland, GA · On-site

$65.40K - $84.30K/yr

... first article inspections (FAI), PPAPs, and supplier audits. • Continuously improve documentation processes and tools to enhance efficiency, traceability, and quality. • Act as a liaison between ...

Absolics Inc

Photoresist Engineering Manager

Covington, GA · On-site

$130K - $160K/yr

Drive process improvements through understanding of Develop / Etching / Strip / AOI (First Article Inspection) stages * Manage production processes based on customer specifications and ensure spec ...

Absolics Inc

Photoresist Engineering Manager

Covington, GA · On-site

$130K - $160K/yr

Drive process improvements through understanding of Develop / Etching / Strip / AOI (First Article Inspection) stages * Manage production processes based on customer specifications and ensure spec ...

HEICO

Quality Engineer

Peachtree City, GA · On-site

$66.90K - $86.40K/yr

Development of AS9102 First Article Inspection requirements * Assist with review of certification packages for PMA Pre-Approvals * Assist with ongoing technical training of PMA Inspectors * Assist in ...

Dongwon

Quality Control Inspector

Hogansville, GA · On-site

... first article, finished parts and components using typical inspection hand measuring devices, coordinate measuring machines, etc. MINIMUM QUALIFICATIONS Required Knowledge and Skills: * Conduct ...

Thrush Aircraft

Lead Manufacturing Engineer

Albany, GA · On-site

Deep familiarity with aerospace quality assurance techniques and First Article Inspection (FAI) per FAA quality standards. Technical Proficiency: Expert-level use of CAD software (SolidWorks/CATIA ...

Recruit12

Quality Engineer

Comer, GA · On-site

$60K - $70K/yr

Support APQP, PPAP, First Article Inspections, and launch activities * Work closely with production, maintenance, and engineering teams to improve processes and reduce defects * Analyze scrap, rework ...

Recruit12

Quality Engineer

Comer, GA · On-site

$28.85 - $33.65/hr

Support APQP, PPAP, First Article Inspections, and launch activities * Work closely with production, maintenance, and engineering teams to improve processes and reduce defects * Analyze scrap, rework ...

American BOA, Inc.

Quality Inspector

Cumming, GA

Inspectors also perform First Article Inspections and Finished Goods Testing. The inspector must possess good communication abilities, be flexible and able to lift up to 30 lbs. Essential Duties and ...

American BOA, Inc.

Quality Inspector

Cumming, GA · On-site

Inspectors also perform First Article Inspections and Finished Goods Testing. The inspector must possess good communication abilities, be flexible and able to lift up to 30 lbs. Essential Duties and ...

Kloeckner Metals Corporation

CNC Operator

Alpharetta, GA · On-site

$19.50 - $26.50/hr

Perform quality checks and first article inspections to verify that machined parts meet design and quality standards * Equipment Maintenance: Maintain and clean CNC machines regularly, keeping ...

HEICO

Mgr., Quality

Rockmart, GA · On-site

Review and approve First Article Inspections (FAIs), deviation requests, and other quality documentation as required. * Support internal and external audits and ensure corrective actions are ...

Integration Systems

Quality Engineer

Smyrna, GA · On-site

$70.40K - $91K/yr

... Support First Article Inspections (FAI) in accordance with AS9102. • Collaborate with engineering to ensure design for manufacturability and quality (DFM/DFQ). • Oversee supplier quality ...

Integration Systems

Quality Engineer

Warner Robins, GA · On-site

$65.60K - $84.80K/yr

... Support First Article Inspections (FAI) in accordance with AS9102. • Collaborate with engineering to ensure design for manufacturability and quality (DFM/DFQ). • Oversee supplier quality ...

next page

Showing results 1-20

People also search for

All JobsFirst Article Inspection JobsFirst Article Inspection Jobs in Georgia

First Article Inspection information

See Georgia salary details

$10

$17

$27

How much do first article inspection jobs pay per hour?

As of May 31, 2026, the average hourly pay for first article inspection in Georgia is $17.22, according to ZipRecruiter salary data. Most workers in this role earn between $13.61 and $19.47 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as a First Article Inspector, and why are they important?

To thrive as a First Article Inspector, you need a solid understanding of quality assurance processes, blueprint reading, and precision measurement techniques, often supported by experience in manufacturing or a related certification like ASQ. Proficiency with inspection tools such as calipers, micrometers, coordinate measuring machines (CMM), and familiarity with documentation systems like FAI forms and quality management software is essential. Strong attention to detail, analytical thinking, and effective communication are critical soft skills for accurately documenting and reporting inspection results. These competencies ensure that products meet required specifications, minimize defects, and maintain compliance with customer and regulatory standards.

What are some common challenges faced during the First Article Inspection (FAI) process and how can they be managed?

One common challenge in First Article Inspection is ensuring all documentation and parts meet the exact specifications outlined by engineering drawings and customer requirements. Miscommunication between production, quality, and engineering teams can lead to delays or non-conformances. To manage these issues, it’s vital to establish clear checklists, maintain open communication channels, and utilize standardized FAI forms. Familiarity with industry standards like AS9102 and working closely with cross-functional teams can greatly streamline the process and minimize errors.

What is First Article Inspection?

First Article Inspection (FAI) is a quality control process used in manufacturing to verify that a new or modified production process produces parts that meet all specified requirements. During FAI, the first item produced is thoroughly examined and measured against design specifications, drawings, and other requirements. This inspection helps identify problems early in the production process, ensuring that future items will consistently meet quality standards. FAI is commonly used in industries such as aerospace, automotive, and electronics.

What is the difference between First Article Inspection vs Quality Control Inspector?

AspectFirst Article InspectionQuality Control Inspector
PurposeVerify that a new product meets design specifications before full productionMonitor and inspect ongoing production to ensure quality standards are maintained
TimingPerformed on the initial production run or prototypeConducted throughout the manufacturing process
FocusDesign conformance and compliance with specificationsProduct quality, defect detection, and process adherence
CredentialsKnowledge of engineering drawings, standards, and inspection methodsUnderstanding of quality standards, inspection techniques, and industry regulations

First Article Inspection focuses on verifying that a new product or component meets all design and quality specifications before mass production begins. In contrast, a Quality Control Inspector continuously monitors ongoing production to identify defects and ensure consistent quality. Both roles are essential in manufacturing but serve different stages of the quality assurance process.

What are popular job titles related to First Article Inspection jobs in Georgia? For First Article Inspection jobs in Georgia, the most frequently searched job titles are:
What job categories do people searching First Article Inspection jobs in Georgia look for? The top searched job categories for First Article Inspection jobs in Georgia are:
First Article Inspection jobs near you
Infographic showing various First Article Inspection job openings in Georgia as of May 2026, with employment types broken down into 30% Full Time, 56% Part Time, 2% Temporary, 11% Contract, and 1% Nights. Highlights an 100% Physical job distribution, with an average salary of $35,816 per year, or $17.2 per hour.
Manufacturing Engineer

Manufacturing Engineer

Intellectt INC

Midland, GA • On-site

$65.40K - $84.30K/yr

Contractor

Posted 28 days ago

Job description

Hello,
Hope you are doing great.

This is Gangadhar from Intellectt INC; we have an immediate opportunity with one of our clients. Please find the below job description and if you are interested, please forward your resume to gangadhar@intellectt.com

Role: Manufacturing Engineer
Location: Midland, GA

Job Description & Skill Requirement:

  • Create, review, and maintain detailed manufacturing documentation (process routings, work instructions, assembly instructions, control plans, etc.) for new part numbers and production processes.
  • Support supplier qualification efforts by reviewing and validating supplier manufacturing documentation, process flows, and capability data.
  • Collaborate with suppliers and internal teams to ensure compliance with quality, regulatory, and customer requirements during new supplier onboarding.
  • Conduct process capability studies, PFMEAs, and risk assessments to validate supplier readiness for new part production.
  • Serve as the subject matter expert for manufacturing documentation standards, ensuring consistency and clarity across internal and supplier documentation.
  • Participate in new product introduction (NPI) activities, ensuring manufacturing documentation is prepared and approved prior to production release.
  • Provide technical support during first article inspections (FAI), PPAPs, and supplier audits.
  • Continuously improve documentation processes and tools to enhance efficiency, traceability, and quality.
  • Act as a liaison between design, quality, and supply chain teams to address manufacturability and documentation gaps.