ZipRecruiter

Log In

1

First Article Inspection Jobs in Florida (NOW HIRING)

TRAK TECOM

Quality Engineer

Tampa, FL · On-site

$68K - $87K/yr

Experienced in First Article Inspection (FAI) documentation IAW AS9102 * Experience with a diverse set of manufacturing and assembly processes, e.g. PCB manufacturing, motors and encoders, conformal ...

VAERO

Quality Control Inspector

Jacksonville, FL · On-site

Work from applicable drawings, specifications, bubble drawings, first article inspection reports, work instructions, vendor instructions or other documentation using inspection tools and gages.

Trak Tecom

Quality Engineer

Tampa, FL · On-site

$68K - $87K/yr

Experienced in First Article Inspection (FAI) documentation IAW AS9102 * Experience with a diverse set of manufacturing and assembly processes, e.g. PCB manufacturing, motors and encoders, conformal ...

Trak Tecom Corporation

Quality Engineer

Tampa, FL · On-site

$68K - $87K/yr

Meet established quality objectives and metrics Perform Internal Audits Review and create First Article Inspection Reports per AS9102 as required Drive Root Cause & Corrective Action of failures and ...

Yeager Manufacturing Technologies

Be Seen First

CNC Setup Machinist (3-Axis & 5-Axis)

Orlando, FL · On-site

$25 - $32/hr

Conduct first article inspection on completed setups * Run production following a successful setup >> * 5+ years of hands-on experience setting up complex parts on 3-axis and 5-axis CNC mills

Yeager Manufacturing Technologies

Be Seen First

CNC Setup Machinist (3-Axis & 5-Axis)

Winter Park, FL · On-site

$25 - $32/hr

Conduct first article inspection on completed setups * Run production following a successful setup >> * 5+ years of hands-on experience setting up complex parts on 3-axis and 5-axis CNC mills

Yeager Manufacturing Technologies

Be Seen First

CNC Setup Machinist (3-Axis & 5-Axis)

Orlando, FL · On-site

$25 - $32/hr

Conduct first article inspection on completed setups * Run production following a successful setup >> * 5+ years of hands-on experience setting up complex parts on 3-axis and 5-axis CNC mills

Yeager Manufacturing Technologies

Be Seen First

CNC Setup Machinist (3-Axis & 5-Axis)

Winter Park, FL · On-site

$25 - $32/hr

Conduct first article inspection on completed setups * Run production following a successful setup >> * 5+ years of hands-on experience setting up complex parts on 3-axis and 5-axis CNC mills

Canopy A&D

Quality Inspector

Cape Canaveral, FL

$28 - $31/hr

The individual will perform receiving, in-process, final inspection & 1st article approval of manufactured and assembled hardware. They will verify processes as required to ensure drawing and ...

Canopy A&D

Quality Inspector

Cape Canaveral, FL

$28 - $31/hr

The individual will perform receiving, in-process, final inspection & 1st article approval of manufactured and assembled hardware. They will verify processes as required to ensure drawing and ...

previous page

Showing results 41-60

All JobsFirst Article Inspection JobsFirst Article Inspection Jobs in Florida

First Article Inspection information

What is first article inspection?

First Article Inspection (FAI) is a quality control process used in manufacturing to verify that a new or modified production process produces parts that meet all specified requirements. During FAI, the first item produced is thoroughly examined and measured against design specifications, drawings, and other requirements. This inspection helps identify problems early in the production process, ensuring that future items will consistently meet quality standards. FAI is commonly used in industries such as aerospace, automotive, and electronics.

What are the key skills and qualifications needed to thrive as a first article inspector?

To thrive as a First Article Inspector, you need a solid understanding of quality assurance processes, blueprint reading, and precision measurement techniques, often supported by experience in manufacturing or a related certification like ASQ. Proficiency with inspection tools such as calipers, micrometers, coordinate measuring machines (CMM), and familiarity with documentation systems like FAI forms and quality management software is essential. Strong attention to detail, analytical thinking, and effective communication are critical soft skills for accurately documenting and reporting inspection results. These competencies ensure that products meet required specifications, minimize defects, and maintain compliance with customer and regulatory standards.

What are some common challenges faced during the first article inspection process and how can they be managed?

One common challenge in First Article Inspection is ensuring all documentation and parts meet the exact specifications outlined by engineering drawings and customer requirements. Miscommunication between production, quality, and engineering teams can lead to delays or non-conformances. To manage these issues, it’s vital to establish clear checklists, maintain open communication channels, and utilize standardized FAI forms. Familiarity with industry standards like AS9102 and working closely with cross-functional teams can greatly streamline the process and minimize errors.

What is the difference between First Article Inspection vs Quality Control Inspector?

AspectFirst Article InspectionQuality Control Inspector
PurposeVerify that a new product meets design specifications before full productionMonitor and inspect ongoing production to ensure quality standards are maintained
TimingPerformed on the initial production run or prototypeConducted throughout the manufacturing process
FocusDesign conformance and compliance with specificationsProduct quality, defect detection, and process adherence
CredentialsKnowledge of engineering drawings, standards, and inspection methodsUnderstanding of quality standards, inspection techniques, and industry regulations

First Article Inspection focuses on verifying that a new product or component meets all design and quality specifications before mass production begins. In contrast, a Quality Control Inspector continuously monitors ongoing production to identify defects and ensure consistent quality. Both roles are essential in manufacturing but serve different stages of the quality assurance process.

What are popular job titles related to First Article Inspection jobs in Florida?

For First Article Inspection jobs in Florida, the most frequently searched job titles are:

What job categories do people searching First Article Inspection jobs in Florida look for?

The top searched job categories for First Article Inspection jobs in Florida are:

What cities in Florida are hiring for First Article Inspection jobs?

Cities in Florida with the most First Article Inspection job openings:

First Article Inspection jobs near you
Infographic showing various First Article Inspection job openings in Florida as of August 2026, with employment types broken down into 1% As Needed, 76% Full Time, 18% Part Time, and 5% Contract. Highlights an 85% Physical, 1% Hybrid, and 14% Remote job distribution.

Quality Inspector - 2nd Shift

Mack Technologies

Melbourne, FL

Full-time

Re-posted 22 days ago

Mack Technologies rating

5.0

Company rating: 5.0 out of 10

Based on 5 frontline employees who took The Breakroom Quiz

157th of 159 rated electronics manufacturers

Job description

2nd Shift Schedule: Monday - Friday (Occasional Mandatory Saturdays)

2nd Shift Hours: 3:30 PM to 12:00 AM EST


Summary

The Quality Inspector is responsible for performing visual, and mechanical and functional inspection of pcb assemblies, plastic and sheet metal parts, sub-assemblies and other electronic, electro-mechanical components for conformance to customer specifications and documenting quality results.


Essential Duties and Responsibilities

  • Complete all data entry as close to "real-time" as possible.
  • Responsible for the inspection of product to ensure material is compliant with customer dimensional and cosmetic requirements.
  • Provide feedback to Engineers, and enter data into log books and in internal database system.
  • Obtain and maintain drawings and procedures from Mack systems.
  • Availability to perform inspections on various production lines if necessary.
  • Perform visual aide inspection of printed circuit board assemblies as various stages of the assemble process, utilizing IPC-A-610 Standards, visual aids, BOMs, written procedures and verbal instructions.
  • Direct applicable products for rework; confirming completion.
  • Interface with source inspectors and arrange proper documentation packages for first article requirements per P.O. and customer expectations.
  • Perform various segments of first article inspection
  • Perform process audits to internal documentation requirements such as AMS, MOI, and VIP.
  • Ensure proper staging product and coordination of required processing steps.
  • Conduct customer quality assurance (CQA), in process, final or incoming inspections as required.
  • Use and verify proper use of routers in IQS software.
  • Read and verify P.O. and drawing requirements.
  • Understand and follow all applicable ISO and job specific procedures.
  • Maintain ESD integrity within production environment.
  • Responsible for the cleanliness of work area and surrounding workspace.
  • Responsible for the accuracy of work-in-process.
  • Participate in additional training as required.
  • May train other employees.
  • Other responsibilities as directed and necessary for the business.


Qualifications

  • High School Diploma or equivalent education.
  • 3+ years of experience in inspection in electronics manufacturing, preferably with PCBA.
  • IPC-A-600/610/620 Certification required.
  • Familiar with operating a 3D Automated Optical Inspection (3DAOI) machine.
  • Capable of performing inspections by following blueprint instructions and written procedures given by the supplier engineering group.
  • Understanding of basic electro-mechanical tools (multi-meters, calipers, etc.) and basic hand tools (wrench, torque drivers etc.)
  • Ability to interpret detailed drawings, schematics and diagrams as required.
  • Has a background in using an ERP system.
  • Basic computer skills, problem solving, mathematical and workstation skills.
  • Good organizational, reading comprehension, written and verbal communication skills are required.
  • Self-motivated, ability to work independently and quickly with a high degree of accuracy and detail.
  • Experience with high-volume work.
  • Ability to operate in a multi-tasking, highly dynamic work environment.
  • Ability to work and communicate effectively as a team member.
  • ESD Training.
  • ISO 9001 experience a plus.
  • Willingness to work flexible hours as necessary.
  • US Person as defined in 22 CRF Part 120.15 (U.S. citizens, lawful permanent residents, refugees and those given asylum in the United States, and temporary residents granted amnesty) since work includes ITAR controlled technical data

What Mack Technologies employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply