ZipRecruiter

Log In

1

Final Quality Control Inspector Jobs in Saint Albans, VT

Medisca

QC Inspector

Plattsburgh, NY · On-site

$23/hr

The main purpose of the QC Inspector position is to assist in maintaining the quality of products according to Standard Operating Procedures and cGMP guidelines as well as to inspect, quarantine, and ...

IDEX

QC Inspector I

Saint Albans, VT · On-site +1

$37K - $56K/yr

The Quality Inspector positions maintain quality standards by approving in-process production, finished products, and incoming materials and recording quality results. The Quality Inspector will work ...

IDEX Corporation

QC Inspector I

Saint Albans, VT · On-site

$37K - $56K/yr

The Quality Inspector positions maintain quality standards by approving in-process production, finished products, and incoming materials and recording quality results. The Quality Inspector will work ...

IDEX Corporation

QC Inspector I

Saint Albans, VT · On-site +1

$56K/yr

The Quality Inspector positions maintain quality standards by approving in-process production, finished products, and incoming materials and recording quality results. The Quality Inspector will work ...

Exyte Group

Senior QA/QC Inspector

Burlington, VT · On-site

$93K/yr

... quality control methodologies to ensure compliance with quality standards and regulations. • ... final product inspections. • Accurately document and analyze inspection and test results ...

National Insurance Inspection Services

Be Seen First

Residential Property Field Inspector

Saint Albans, VT · On-site

... high quality property insurance inspections, catering to the specific needs of property and casualty insurance companies and agencies around the country. With over 40 years in the loss control ...

Wabtec

Quality Engineer

Plattsburgh, NY · On-site

$75K - $97K/yr

Performing final inspections of completed products, such as door panels, operators, and peripheral ... Establish quality control plans to drive proactive quality improvements in area of responsibility.

next page

Showing results 1-20

All JobsFinal Quality Control Inspector JobsFinal Quality Control Inspector Jobs in Saint Albans, VT

Final Quality Control Inspector information

See Saint Albans, VT salary details

$10

$19

$30

How much do final quality control inspector jobs pay per hour?

As of Jul 26, 2026, the average hourly pay for final quality control inspector in Saint Albans, VT is $19.83, according to ZipRecruiter salary data. Most workers in this role earn between $15.96 and $22.21 per hour, depending on experience, location, and employer.

What is the difference between Final Quality Control Inspector vs Quality Assurance Inspector?

AspectFinal Quality Control InspectorQuality Assurance Inspector
CertificationsOften requires quality control certifications (e.g., CQI, ASQ)May also hold similar certifications, with additional focus on QA processes
Work EnvironmentWorks at the end of production lines, inspecting finished productsInvolved throughout the production process, ensuring quality standards are met
Industry UsageCommon in manufacturing, aerospace, automotive sectorsUsed across manufacturing, pharmaceuticals, and food industries
Primary FocusDetects defects in finished products before shipmentDevelops and implements quality systems to prevent defects

While both roles focus on quality, the Final Quality Control Inspector primarily inspects finished products for defects, whereas the Quality Assurance Inspector works proactively to develop processes that prevent defects throughout production.

Which pays more, QA or QC?

Final Quality Control Inspectors typically earn slightly less than Quality Assurance (QA) professionals, as QA roles often require broader responsibilities and higher skill levels. However, salaries can vary based on industry, experience, and certifications such as ASQ certifications. Both roles are essential in manufacturing and production environments, with QA generally offering higher compensation due to its focus on process improvement and prevention.

What are the key skills and qualifications needed to thrive as a Final Quality Control Inspector, and why are they important?

To thrive as a Final Quality Control Inspector, you need a keen eye for detail, strong understanding of quality assurance standards, and typically a high school diploma or technical certification. Familiarity with inspection tools (like calipers, micrometers), quality management systems (such as ISO 9001), and reporting software is commonly required. Excellent communication, critical thinking, and problem-solving skills help inspectors document findings and collaborate effectively with production teams. These skills are crucial to ensure products meet required specifications and maintain customer satisfaction and regulatory compliance.

What type of inspectors make the most money?

Senior quality control inspectors, especially those with specialized skills or certifications in industries like aerospace, pharmaceuticals, or electronics, tend to earn the highest salaries. Inspectors with advanced training, experience, and the ability to use complex testing tools often command higher pay compared to entry-level roles.

Is QC inspection a good career?

A Final Quality Control Inspector plays a key role in ensuring products meet safety and quality standards, often requiring attention to detail and knowledge of inspection tools. The career can offer stable employment with opportunities for advancement and certification, such as ASQ certifications, depending on the industry. It is suitable for individuals interested in manufacturing, quality assurance, and technical skills.

What are some common challenges faced by Final Quality Control Inspectors, and how are they addressed on the job?

Final Quality Control Inspectors often face challenges such as identifying subtle defects in products under tight deadlines and maintaining consistency across large production batches. To address these, inspectors use standardized checklists, precision measuring tools, and collaborate closely with production teams to ensure clear communication about quality standards. Continuous training and adherence to quality protocols also help inspectors stay updated on best practices and improve their accuracy, making it easier to uphold rigorous quality requirements.

How much do quality inspectors earn?

Quality control inspectors typically earn a median annual salary of around $40,000 to $50,000, depending on experience, industry, and location. Entry-level inspectors may earn less, while those with specialized skills or certifications can earn higher wages, often working full-time shifts in manufacturing or production environments.

What does a Final Quality Control Inspector do?

A Final Quality Control Inspector is responsible for examining finished products to ensure they meet specified quality standards before they are shipped to customers. They inspect items for defects, verify compliance with safety and quality guidelines, and document any issues found during the inspection process. Their work helps ensure that only products meeting the company’s quality requirements reach the market, reducing returns and enhancing customer satisfaction. Final Quality Control Inspectors may also recommend improvements to production processes to prevent future defects.
Final Quality Control Inspector jobs near you

Quality Control Inspector

Hayward Tyler

Colchester, VT

$24 - $30/hr

Full-time

Posted 24 days ago

Job description

Department Focus

The overarching philosophy will be “Right the First Time” in everything we do and produce and driving towards perfection. Hidden problems and trends will be made visual, and continuously improved.

Job Description and Duties:
  1. Follows HTI’s Quality principles:
    • Understand customers’ business objectives as well as their technical requirements.
    • Agree what can be delivered in what timeframe and develop a plan on how delivery can be met.
    • Work co-operatively with all departments and suppliers to exceed customer expectations.
    • Make the right people, with the correct level of authority, skills and experience, available for the project.
    • Identify and manage risks jointly.
    • Always execute a quality plan.
    • Ensure sufficient staff training and help to manage the impact of change.
  1. Responsible for performing receiving, interim, & final inspections of parts and units and verifies that all operations are signed off (on the traveler) and closed (in Epicor) before issuing / releasing parts to Manufacturing.
  2. Responsible to verify that the correct material and batch number is being issued to Manufacturing.
  3. Responsible for providing complete batch files which could include receiving inspection report, CMTR, DMR, testing, and final prints
  4. Assisting the Sr. QCI with notifying the instrument owners monthly of expiring calibration dates in accordance with the calibration review cycle for instruments in the QC calibration system
  5. Assisting the Sr. QCI with maintaining calibrated masters, send instrumentation out to vendors for calibration, call in vendors for in-house calibration, and perform in-house calibration when qualified
  6. Responsible to provide independent witness and sign off completion of traveler inspection operations such as hydro testing and balance as required, performs audits on the machining in-process inspection, and may perform final inspection on the machining center as required
  7. Interacts in the Discrepant Material Report (DMR) processing function by initiating the DMR, provides written detail of the part discrepancy from the document, tags out & segregates the discrepant part to put a hold on further manufacturing processing prior to DMR resolution, and closes out & transfers the discrepant part in the DMR system after DMR resolution.
  8. Participates in problem solving with both QA & OPS personnel
  9. Participates and supports when a customer or outside organization (such NUPIC & ASME) audit or performs QC surveillance activities at HTI and provides QC surveillance activities at suppliers.
  10. Trains backup personnel for inspection, and trains shop personnel on use of gauging when requested.
  11. Substitutes for documentation control during absences as required
  12. Other related duties as required
Minimum qualifications:
  • High School education (2-year technical degree preferred)
  • 3-5 years of manual machining, quality control inspection, or equivalent measurement experience
  • Ability to read & interpret engineering drawings, standards and specifications
  • Expected travel is 5-15% yearly
  • Proficient in Word, Excel, PowerPoint, Outlook and the Internet
  • Strong interpersonal and problem-solving skills
  • Detail oriented, organized and highly motivated
  • Enhancement to qualifications would include - ASNT/SNT-TC-1A Level II Certification and experience in nondestructive examination (NDE) methods, i.e. (MT) Magnetic Particle Inspection, (PT) Liquid Penetrant Inspection and (VT) Visual Testing
  • Enhancement to qualifications would include - understanding of the audit process including types of audits, planning, preparation, execution, reporting results, and follow-up
  • Enhancement to qualifications would include – an understanding of a quality systems and their development, documentation, and implementation to domestic or international standards and their requirements
  • Enhancement to qualifications would include – an understanding of welding per ASME Section IX
Shifts:
1st Shift: Mon-Thurs 7:30am-4pm, Fri 7:30am-1:30pm (four 8.5 hour days, one 6 hour day)
2nd Shift: Mon-Thurs 3:00pm-1:30am (four 10 hour days)