ZipRecruiter

Log In

1

Final Quality Control Inspector Jobs in Ardmore, TN

MS Companies

Quality Inspector - 2nd Shift

Pulaski, TN · On-site

Join a rapidly growing, technology focused team MS Companies is HIRING IMMEDIATELY for an energetic, experienced and self-motivated Quality Control Inspector to join our team within our rapidly ...

Aerotek

Quality Control Technician

Decatur, AL · On-site

$16.75 - $21.50/hr

Conduct fabrication inspection in line with established fabrication processes and quality ... AI helps assess applications and qualifications, but final decisions are made by our hiring team.

Morgan Metals Inc

Quality Control Technician

Athens, AL · On-site

$16 - $23/hr

Quality Control Technician Morgan Metals Inc - Athens, AL $16-$23 per hour | Full-Time | Overtime ... Inspect raw materials, in-process parts, and finished products * Read and interpret blueprints and ...

BL Harbert International LLC

MEP QC

Huntsville, AL · On-site

$82K - $109K/yr

The MEP QC works closely with the project team, supporting and assisting the QC Manager, Project ... Responsibility for the performance of all MEP inspection and testing activities. * On Design-Build ...

Leidos

Quality Inspector

Huntsville, AL · On-site

$48K - $86K/yr

... manufacturing quality control. * Candidate must have demonstrated experience with standard ... Candidate must be a US Citizen and possess (and be able to maintain) a Final Secret Clearance or ...

Leidos

Quality Inspector

Huntsville, AL · On-site

$48K - $86K/yr

... manufacturing quality control. * Candidate must have demonstrated experience with standard ... Candidate must be a US Citizen and possess (and be able to maintain) a Final Secret Clearance or ...

previous pagenext page

Showing results 21-40

All JobsFinal Quality Control Inspector JobsFinal Quality Control Inspector Jobs in Ardmore, TN

Final Quality Control Inspector information

See Ardmore, TN salary details

$10

$18

$28

How much do final quality control inspector jobs pay per hour?

As of Aug 8, 2026, the average hourly pay for final quality control inspector in Ardmore, TN is $18.29, according to ZipRecruiter salary data. Most workers in this role earn between $14.76 and $20.48 per hour, depending on experience, location, and employer.

What is the difference between Final Quality Control Inspector vs Quality Assurance Inspector?

AspectFinal Quality Control InspectorQuality Assurance Inspector
CertificationsOften requires quality control certifications (e.g., CQI, ASQ)May also hold similar certifications, with additional focus on QA processes
Work EnvironmentWorks at the end of production lines, inspecting finished productsInvolved throughout the production process, ensuring quality standards are met
Industry UsageCommon in manufacturing, aerospace, automotive sectorsUsed across manufacturing, pharmaceuticals, and food industries
Primary FocusDetects defects in finished products before shipmentDevelops and implements quality systems to prevent defects

While both roles focus on quality, the Final Quality Control Inspector primarily inspects finished products for defects, whereas the Quality Assurance Inspector works proactively to develop processes that prevent defects throughout production.

Is final quality control inspection a good career?

Final quality control inspection is a stable career that involves reviewing products for defects and ensuring standards are met, often requiring attention to detail and familiarity with inspection tools. It can offer steady employment with opportunities for advancement and certification, such as Six Sigma or ISO standards, depending on the industry. The role typically involves working in manufacturing or production environments and may require shift work or physical stamina.

What skills and qualifications are needed to be a final quality control inspector?

To thrive as a Final Quality Control Inspector, you need a keen eye for detail, strong understanding of quality assurance standards, and typically a high school diploma or technical certification. Familiarity with inspection tools (like calipers, micrometers), quality management systems (such as ISO 9001), and reporting software is commonly required. Excellent communication, critical thinking, and problem-solving skills help inspectors document findings and collaborate effectively with production teams. These skills are crucial to ensure products meet required specifications and maintain customer satisfaction and regulatory compliance.

What are common challenges faced by final quality control inspectors and how are they addressed?

Final Quality Control Inspectors often face challenges such as identifying subtle defects in products under tight deadlines and maintaining consistency across large production batches. To address these, inspectors use standardized checklists, precision measuring tools, and collaborate closely with production teams to ensure clear communication about quality standards. Continuous training and adherence to quality protocols also help inspectors stay updated on best practices and improve their accuracy, making it easier to uphold rigorous quality requirements.

Are final quality control inspectors in demand?

Final quality control inspectors are in steady demand across manufacturing, aerospace, automotive, and electronics industries. Employment opportunities often depend on industry growth and the need for skilled inspectors who can use tools like calipers and measurement devices, with certifications such as ASQ being advantageous.

What does a final quality control inspector do?

A Final Quality Control Inspector is responsible for examining finished products to ensure they meet specified quality standards before they are shipped to customers. They inspect items for defects, verify compliance with safety and quality guidelines, and document any issues found during the inspection process. Their work helps ensure that only products meeting the company’s quality requirements reach the market, reducing returns and enhancing customer satisfaction. Final Quality Control Inspectors may also recommend improvements to production processes to prevent future defects.
What cities near Ardmore, TN are hiring for Final Quality Control Inspector jobs? Cities near Ardmore, TN with the most Final Quality Control Inspector job openings:
Final Quality Control Inspector jobs near you
Infographic showing various Final Quality Control Inspector job openings in Ardmore, TN as of July 2026, with employment types broken down into 1% As Needed, 75% Full Time, 20% Part Time, 1% Temporary, 2% Contract, and 1% Nights. Highlights an 96% Physical, 1% Hybrid, and 3% Remote job distribution, with an average salary of $38,041 per year, or $18.3 per hour.

xPL Offsite - Manufacturing Quality Control Manager

Turner Construction

Decatur, AL • On-site

Full-time, Part-time

Re-posted 9 days ago

Turner Construction rating

7.5

Company rating: 7.5 out of 10

Based on 69 frontline employees who took The Breakroom Quiz

27th of 80 rated construction

Job description

Division:
xPL Offsite OSM
Project Location(s):
Decatur, AL 35601 USA
Minimum Years Experience:
Travel Involved:
Job Type:
Regular
Job Classification:
Experienced
Education:
Job Family:
Construction
Compensation:
Salaried Exempt
Position Description:Manage quality program for xPL fabrication facility ("plant") (e.g., steel, MEP skids/modules, and prefabricated assemblies). Establish and run plant-level Quality Management System, validate every assembly meets drawings/specs and code requirements, and drive continuous improvement across design, procurement, fabrication, testing, and shipping.
Essential Duties & Key Responsibilities:
  • Establish, implement, and maintain xPL fabrication facility ("plant") Quality Management System (QMS) aligned with ISO 9001, AISC, and Turner procedures./li>
  • Create and maintain Quality Control (QC) Plan, Individual Test Plans (ITPs) hold points, and inspection checklists for each product family./li>
  • Coordinate receiving, in-process, final inspections (e.g., dimensional, visual, weld, coating) and manage calibration and verification of gauges/fixtures./li>
  • Conduct compliance verification with regulatory and contractual requirements (e.g., AISC, AWS D1.1/D1.3, ASME Section IX, IBC), and project specifications; coordinate Non-Destructive Examination (NDE) (VT, PT, MT, UT) with Level II/III, as required. /li>
  • Manage and document control drawings (e.g., WPS, PQR, WQTRs, MTRs), lot/batch traceability, and quality records; manage stamp/marking and traveler packets./li>
  • Manage Non-Conformance Report (NCR) intake, material disposition (MRB), rework/repair plans, and corrective and preventive actions using 8D, 5-Why, Ishikawa, and FMEA, as appropriate./li>
  • Qualify and audit key suppliers (e.g., metals, piping, valves, electrical), set up receiving inspection plans, and drive corrective actions (SCARs) and PPAP-like submissions for critical parts./li>
  • Establish SPC on critical dimensions, first-article/first-piece approvals, and layered process audits (LPAs); facilitate Kaizen events to reduce defects and rework./li>
  • Collaborate with Production, Engineering, and VDC teams to review shop drawings, submittals, and RFIs; set up quality gates per Takt/line balance and help resolve fit-up issues before production./li>
  • Plan and witness tests (e.g., hydro/pneumatic pressure tests, leak tests, continuity/megger tests for MEP skids, functional FATs) and document results and compile data books/turnover packages./li>
  • Lead team of QC inspectors (e.g., weld, dimensional, coatings); train craft on workmanship standards, visual weld acceptance, and defect prevention./li>
  • Manage SQDCM quality metrics (e.g., FPY, DPMO, COPQ, rework hours, escapes); publish dashboards and lead weekly quality reviews./li>
  • Communicate and enforce quality-related safety controls (e.g., pressure testing barricades, lockout for inspection) and provide information to support Environmental Health & Safety (EHS) audits./li>
  • May supervise team members, participate in hiring process, onboard new employees, contribute to performance appraisals during annual performance cycle, utilize talent management systems, and identify appropriate training to help with staff development needs./li>
  • Other activities, duties, and responsibilities as assigned.

#LI-TM1
Qualifications:
  • Bachelor's Degree from accredited degree program desired, with minimum of 8 years of experience working in fabrication and/or manufacturing in Quality Assurance/Quality Control (QA/QC) (e.g., modular/MEP skids, structural steel, or industrial equipment), prior project-based QC in construction or product manufacturing, a plus, or equivalent combination of education, training, and/or experience
  • Desired credentials: AWS CWI or ACQ, NDT Level II (VT/PT/MT/UT), AISC QC experience, Six Sigma Green Belt/Black Belt, ISO 9001 Lead Auditor
  • Working knowledge of ISO 9001, AWS, AISC, ASME, coating standards (SSPC/AMPP), and relevant building, mechanical, and electrical codes
  • Well-rounded knowledge of manufacturing processes across all trades, means and methods, and materials their characteristics, installation procedures and tolerances
  • Ability to interpret contract documents, drawings, specifications, scopes of work and project schedule
  • Excellent business acumen and critical thinking skills to assess and solve problems and conflicts
  • Excellent interpersonal communication, professional presentation skills, and persuasion skills to confidently engage and influence others
  • Self-starter, capable of managing multiple complex issues and tasks successfully to completion
  • Build engaging partnerships with team and organizational stakeholders through trust, teamwork, and direct communication
  • Adapt to manage through ambiguity and changing environments and demands
    Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, climb, balance, stoop, kneel, crouch, crawl, use hands to finger, handle or feel objects, tools, or controls, and reach with hands, talk, and hear. The employee frequently views a computer monitor and frequently uses a computer keyboard. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performance of the required duties require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. The employee is regularly required to be mobile, and the employee occasionally travels both short and long distances via a variety of conveyances. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
    Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. The employee regularly performs work on-site at construction work sites, office locations, and/or off-site venues. While performing the duties of this job, the employee regularly works in an office or remote setting. The noise in the work environment is usually quiet to moderate in an office setting. While performing the duties of this job, the employee occasionally works at manufacturing and/or construction work sites where the employee is exposed to moving mechanical parts, high precarious places, fumes, or airborne particles, outside weather conditions, and risk of electrical shock. The noise in the work environment is usually moderate to loud. The employee is required to work in compliance with company safety policies, procedures, and applicable laws.

Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law.

What Turner Construction employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Turner Construction logo

About Turner Construction

Sourced by ZipRecruiter

Turner Construction, headquartered in New York, NY, US, is a recognized leader in the construction industry. It was established in 1902 and has since curved its niche as one of the most reputable construction firms. Turner Construction provides a broad range of services like general contracting, construction management, design-build, and consulting. Devoted to environment-friendly building practices, it is considered a pioneer in green building and sustainability efforts. Their top-tier projects include Madison Square Garden, Yankee Stadium, and the United Nations Secretariat Building in New York City. The company's mission is to deliver an exceptional product by relentless commitment to their core principles – teamwork, integrity, commitment, and community.

Industry

Construction

Company size

10,000+ Employees

Headquarters location

New York, NY, US

Year founded

1902

View All Turner Construction Jobs

Apply