ZipRecruiter

Log In

1

Evening Solids Control Operator Jobs in Illinois

Lake County

Dryer Tech - Buffalo Grove

Libertyville, IL · On-site

$34.01/hr

... control and regulatory compliance samples. Monitors biosolids storage distribution. Assist with deliveries and maintain equipment and spare parts inventory. Maintains and cleans solids drying ...

Inframark

Wastewater Operator

Quincy, IL · On-site

$23 - $27/hr

Willing to work all shifts, including weekends, holidays, evening and 24-hour emergency on call. ... Knowledge of process control techniques, maintenance procedures and safe practices. * The ability ...

FedEx Supply Chain

Forklift Operator

New Lenox, IL

$12.21 - $23.17/hr

Shift Monday - Thursday - 2nd Shift (Afternoon/Evening) Position Summary The Forklift Operator I is ... Quality control to ensure accuracy of all transactions * Performing daily equipment inspections for ...

Darwill, Inc.

Prepress Operator

Hillside, IL · On-site

$19 - $25.50/hr

Follow all QC measures assigned to the PrePress department Qualifications: * 5+ years in prepress ... May be required to work extended/evening hours as needed. * Ability to walk up & down stairs. * 1st ...

Darwill, Inc.

Prepress Operator

Hillside, IL · On-site

$19 - $25.50/hr

Follow all QC measures assigned to the PrePress department Qualifications: * 5+ years in prepress ... May be required to work extended/evening hours as needed. * Ability to walk up & down stairs. * 1st ...

Darwill, Inc.

Prepress Operator

Hillside, IL · On-site

$19 - $25.50/hr

Follow all QC measures assigned to the PrePress department Qualifications: * 5+ years in prepress ... May be required to work extended/evening hours as needed. * Ability to walk up & down stairs. * 1st ...

MacLean-Fogg

Press Operator - 2nd Shift

Savanna, IL · On-site

$17 - $19/hr

Ensure produced items meet quality control requirements. * Perform basic equipment troubleshooting ... Evening / 2nd Shift FLSA Status Non-Exempt Business Engineered Solutions

FedEx Supply Chain

Forklift Operator II

Edwardsville, IL · On-site

$13.99 - $26.55/hr

Shift Monday - Friday - 2nd Shift (Afternoon/Evening) Position Summary The Forklift Operator II is ... Quality control to ensure accuracy of all transactions * Use of wire guidance systems for ...

next page

Showing results 1-20

All JobsEvening Solids Control Operator JobsEvening Solids Control Operator Jobs in Illinois

Evening Solids Control Operator information

What are the most commonly searched types of Solids Control Operator jobs in Illinois?

The most popular types of Solids Control Operator jobs in Illinois are:

What cities in Illinois are hiring for Evening Solids Control Operator jobs?

Cities in Illinois with the most Evening Solids Control Operator job openings:

Evening Solids Control Operator jobs near you
Infographic showing various Evening Solids Control Operator job openings in Illinois as of August 2026, with employment types broken down into 1% As Needed, 62% Full Time, 30% Part Time, 6% Contract, and 1% Nights. Highlights an 96% Physical, 1% Hybrid, and 3% Remote job distribution.

Quality Control Color Shader 1st M-R 8:30am-5pm & Fri 7am-3:30pm-Batavia, Illinois

Hentzen Coatings, Inc.

Yorkville, IL

$20 - $25/hr

Full-time

Retirement, PTO

Posted 14 days ago

Key responsibilities

  • Determine the type and amount of color and gloss additives required to match product to physical standards.

  • Use a spectrophotometer to obtain color values, interpret results, and create test panels for visual inspection.

  • Perform QC lab technician responsibilities such as measuring viscosity, solids, and weight per gallon, and add tints and additives directly to tanks.

Job description

Quality Control Color Shader
(Batavia, IL Plant)
Schedule: 1st Shift - Monday-Thursday (8:30AM-5:30PM), Friday (7:00AM-3:30PM)
Pay Range: $20.00 - $25.00 per hour (based on experience and qualifications)
Since 1923, Hentzen Coatings, Inc. has remained an independent, privately held company dedicated to excellence in the development and manufacture of advanced coatings. Our commitment to innovation, quality, and service has earned us recognition as a trusted partner and technology leader in the aerospace, defense, and industrial markets. With nearly a century of experience, we've mastered the art of custom-engineering coatings to meet the unique and demanding requirements of our customers. This innovation comes to life in our state-of-the-art facilities, where talented teams collaborate to solve complex challenges and deliver cutting-edge solutions.
Position Summary
The Quality Control Color Shader is responsible for performing all operations required to adjust wet properties and to tint a wide variety of liquid coatings in accordance with formula specifications.
Successful candidates must achieve acceptable scores on both the color matching and math assessments.
Essential Duties & Responsibilities
  • Determine the type and amount of color and gloss additives required to match product to physical standards.
  • Use a spectrophotometer (X-Rite) to obtain color values against stored standards and interpret results.
  • Create test panels primarily by hand spraying and inspect panels visually for both color and appearance.
  • Collaborate with chemists and supervisors in determining procedures and additives to use on out-of-spec products and update formulas for better color come off in future batches.
  • Enter final quality results in data management program. Use historical data in database to tint and adjust batches.
  • Perform QC lab technician responsibilities such as viscosity, solids, weight per gallon.
  • Physically add tints, flatteners, and other additives directly to tanks.
  • As part of the housekeeping procedures, the employee may be involved with the disposal of hazardous waste. The initial training of how to properly dispose of hazardous waste will be performed by the Environmental and Safety department or the department supervisor. Annual training of the same will be performed by the EHS department.
  • Comply with all quality, safety, and work rules and regulations.
  • Clean up equipment and properly store equipment.
  • Perform other miscellaneous duties as assigned by the Supervisor or Manager.

Qualification Requirements
  • Preferred education level: Associate's or two-year college degree or equivalent.
  • Preferred experience level: Three or more years of experience in batch creation, wet testing, color matching, and paint characteristics in a manufacturing setting.
  • Preferred analytical skills: Understand and analyze performance metrics such as FRC (hits/batch), cycle time and on time delivery to drive QC process improvements.
  • Ability to manipulate QC data in Excel and Access databases.
  • Excellent color vision.
  • Excellent math skills including metric to standard conversions.
  • Superb written and verbal communication skills.
  • Excellent computer skills (Microsoft Office - Word, Excel, Outlook), ERP system and other office machinery.
  • Superb written and verbal communication skills.
  • Willing to work in a team environment and contribute to group goals.
  • Excellent team building and communications skills.
  • Ability to receive and provide instructions in a positive manner.
  • Must be detail oriented with the ability to multi-task.

Work Environment & Physical Requirements
Physical Demands
While performing the duties of this job, the employee is frequently required to talk and/or hear, stand, and/or walk, use hands to finger, handle or touch objects or controls, and move from place to place. The employee is regularly required to sit, balance, stoop, and occasionally reach above shoulders. The employee occasionally must use foot/feet to operate machinery, climb, or balance and reach above the shoulders.
The employee may regularly lift and/or move up to 65 lbs. and occasionally up to 100 lbs. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, and the ability to adjust focus.
Work Environment
The employee will normally be working in a well-ventilated, heated production area and may be working near moving mechanical parts. The employee may occasionally be exposed to fumes and/or airborne particles in the production area. The employee may be required to work outside in all weather conditions.
The noise level in the work environment is usually loud while working in proximity to production equipment. While working in the office environment, the noise level is moderate.
Personal Protection Equipment is required during various processes in the production area. Safety shoes, glasses, and flame-retardant uniforms are required in the production area. Respirators and ear plugs may be required when performing certain production activities
Benefits
  • Competitive benefits package.
  • Generous PTO policy
  • 401(k) Employer Match: We match employee contributions up to 8% of eligible compensation.
  • Profit Sharing: Discretionary annual contribution based on company performance.
  • Employee referral bonus program
  • Monthly employee food trucks
  • ...and much more!

At Hentzen, you'll find more than a job-you'll discover an opportunity to learn, grow, and make an impact. If you're ready to join a company known for its heritage of innovation and dedication to its people, we invite you to explore a rewarding career with us.
Please send your resume to:
Hentzen Coatings, Inc.
Attn: Human Resources
6937 W. Mill Road
Milwaukee, WI 53218
or
APPLY ONLINE AT:
Hentzen Career Center
Hentzen Coatings, Inc. is an Equal Opportunity Employer, including Veterans and Individuals with Disabilities.
www.hentzen.com
All candidates are subject to post-offer testing: including a job-related pre-employment physical, drug screen, and background check.
M-F: 1st Shift
M-Thurs. 8:30am-5:00pm & Fri. 7am-3:30pm

Apply