1

Erosion Control Inspector Jobs in Atlanta, GA (NOW HIRING)

Perform erosion control inspections to verify compliance with approved Erosion, Sedimentation, and Pollution Control (ES amp;PC) plans, permit requirements, and applicable environmental regulations ...

CEI Inspector II

Atlanta, GA · On-site

$25 - $35/hr

GSWCC Level 1a (Erosion Control). * Passing scores on GDOT's Construction Engineering Inspection Training tests - Group 1 (General Provisions, Auxiliary Items, Basic Highway Math, Basic Highway Plan ...

CEI Inspector II

Atlanta, GA · On-site

$25 - $35/hr

GSWCC Level 1a (Erosion Control). * Passing scores on GDOT's Construction Engineering Inspection Training tests - Group 1 (General Provisions, Auxiliary Items, Basic Highway Math, Basic Highway Plan ...

Monitor and inspect traffic control devices and erosion and sediment control measures. * Conduct field measurements and calculations for pay quantities and maintain accurate contract documentation ...

Mechanic

Cartersville, GA · On-site

$22.25 - $29.25/hr

... inspections and preventive maintenance requirements; correcting vehicle deficiencies; making adjustments and alignments; keeping records. TEC is the largest and most experienced erosion control ...

GSWCC Level 1a (Erosion Control) * ATSSA Advanced Traffic Control * Nuclear Radiation Safety Certificate * Passing scores on GDOT's Construction Engineering Inspection Training tests Group 1 (General ...

CEI Senior Inspector

Cumming, GA · On-site

$42.50 - $74.38/hr

GSWCC Level 1a (Erosion Control) * ATSSA Advanced Traffic Control * Nuclear Radiation Safety Certificate * Passing scores on GDOT's Construction Engineering Inspection Training tests Group 1 (General ...

Monitor and inspect traffic control devices and erosion and sediment control measures. * Conduct field measurements and calculations for pay quantities and maintain accurate contract documentation ...

next page

Showing results 1-20

Erosion Control Inspector information

See Atlanta, GA salary details

$11

$20

$32

How much do erosion control inspector jobs pay per hour?

As of Jul 19, 2026, the average hourly pay for erosion control inspector in Atlanta, GA is $20.65, according to ZipRecruiter salary data. Most workers in this role earn between $16.63 and $23.12 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as an Erosion Control Inspector, and why are they important?

To thrive as an Erosion Control Inspector, you need knowledge of environmental regulations, erosion and sediment control practices, and a relevant certification or degree in environmental science or a related field. Familiarity with GIS mapping tools, inspection software, and compliance documentation systems is typically required. Strong attention to detail, effective communication, and problem-solving skills help inspectors identify issues and ensure regulatory compliance. These skills are vital for protecting natural resources, minimizing environmental impact, and maintaining compliance with local and federal laws.

How much does an erosion control inspector make?

Erosion control inspectors typically earn between $40,000 and $60,000 annually, depending on experience, location, and certifications. They often work outdoors, inspecting construction sites to ensure erosion prevention measures are properly implemented.

What is the difference between Erosion Control Inspector vs Environmental Technician?

AspectErosion Control InspectorEnvironmental Technician
CertificationsOften requires erosion control or construction-related certificationsTypically requires environmental science or related certifications
Work EnvironmentConstruction sites, erosion control projectsEnvironmental assessments, fieldwork, labs
Employer & IndustryConstruction, civil engineering, environmental firmsEnvironmental consulting, government agencies
Search & Comparison IntentPeople comparing field inspection roles in erosion controlPeople exploring environmental fieldwork roles

The main difference is that Erosion Control Inspectors focus specifically on monitoring and ensuring erosion control measures on construction sites, while Environmental Technicians have a broader role in environmental assessments and data collection. Both roles require fieldwork and certifications, but their focus areas and industries differ slightly.

What is an Erosion Control Inspector?

An Erosion Control Inspector is a professional responsible for monitoring construction sites and land development projects to ensure compliance with environmental regulations that prevent soil erosion and sediment runoff. They inspect sites for proper installation and maintenance of erosion and sediment control measures, such as silt fences, sediment basins, and vegetation. Their work helps protect nearby waterways and properties from pollution and damage caused by uncontrolled erosion. Erosion Control Inspectors often document site conditions, provide recommendations for corrective actions, and may work with contractors to achieve regulatory compliance.

What is an erosion inspection?

An erosion inspection is a process performed by an erosion control inspector to assess the stability of soil and sediment on construction sites or disturbed land. The inspector checks for signs of erosion, such as sediment runoff or exposed soil, and ensures that erosion control measures like silt fences or erosion control blankets are properly installed and functioning. This helps prevent environmental damage and complies with regulatory standards.

How does an Erosion Control Inspector typically collaborate with construction project teams during site inspections?

An Erosion Control Inspector works closely with project managers, site supervisors, and contractors to ensure that erosion and sediment control measures are properly implemented and maintained throughout the construction process. They conduct regular site visits, provide guidance on best management practices, and communicate findings through detailed reports. Inspectors also offer recommendations for corrective actions when issues are identified, helping teams stay compliant with environmental regulations and avoid costly delays or fines. Effective collaboration and clear communication are essential for maintaining project timelines and protecting natural resources.

What does an erosion control inspector do?

An erosion control inspector evaluates construction sites to ensure erosion prevention measures, such as silt fences and sediment basins, are properly installed and maintained. They monitor environmental conditions, enforce compliance with regulations, and document inspections to prevent soil erosion and protect water quality.

How to become a certified professional in erosion and sediment control?

Erosion Control Inspectors can become certified through programs like the Certified Erosion and Sediment Control Inspector (CESCI) offered by the International Erosion Control Association or similar organizations. Certification typically requires completing training courses, passing an exam, and gaining field experience in erosion and sediment control practices. Maintaining certification may involve continuing education and periodic renewal.
What are popular job titles related to Erosion Control Inspector jobs in Atlanta, GA? For Erosion Control Inspector jobs in Atlanta, GA, the most frequently searched job titles are:
What job categories do people searching Erosion Control Inspector jobs in Atlanta, GA look for? The top searched job categories for Erosion Control Inspector jobs in Atlanta, GA are:
Infographic showing various Erosion Control Inspector job openings in Atlanta, GA as of July 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $42,956 per year, or $20.7 per hour.
Worksite Erosion Control Supervisor - Metro Atlanta

Worksite Erosion Control Supervisor - Metro Atlanta

E.R. Snell Contractor, Inc.

Atlanta, GA • On-site

Full-time

Re-posted 9 days ago


Job description

Application Instructions
Thank you for your interest in E.R. Snell Contractor! Please complete the entire application. We will review your application and contact you.
Position Description
A Worksite Erosion Control Supervisor (WECS) is an individual who is charged with maintaining NPDES permit compliance, specifically pertaining to erosion control. Our permits require us to conduct both routine and post-rain event inspections of infrastructure constructions projects and document those findings on an associated Excel spreadsheet.
Job Responsibilities
  • Performing inspections
  • Maintaining the appropriate paperwork
  • Coordinating sub-contractors
  • This position is primarily structured outdoors on a live construction project.
  • Must have a valid driver's license and pass an MVR test.
  • Visual inspections of the job site are conducted involving a combination of walking and driving. Must be comfortable walking a construction job site and capable of walking through mud, over small obstacles, up/down steep slopes, etc.
  • Individuals should have good organizational habits and good communication skills.

  • Position Requirements
  • Supervisory Skills - Manage a crew, train employees, evaluate performance, report time, conduct interviews
  • People Skills - Meet with principals, supervisors, etc.
  • Problem solving skills - Negotiate solutions that are cost efficient for the company and owner
  • Promote, execute and adhere to the company's safety program, and encourage all employees, sub-contractors and consultants to adopt safety as a culture.
  • Basic computer skills
  • to work nights and weekends when required.

  • The laborer positions require long periods of standing, walking, climbing, stooping and bending. Laborer positions also require periodic lifting of up to 50 pounds.
    Equal Opportunity Employer
    E.R. Snell Contractor, Inc. is an equal opportunity employer and a drug-free workplace. Women are encouraged to apply.