1

Equipment Testing Jobs in Tennessee (NOW HIRING)

Knowledge of ventilation design, ductwork, pressure control, heat transfer, mechanical equipment, testing, balancing, and commissioning principles. * Strong technical writing, analytical ...

UPS Tech 1 - Nashville, TN

Nashville, TN · On-site

$27.75 - $36.25/hr

Our technicians perform preventive maintenance and equipment testing as well as emergency service calls at high profile government, institutional and commercial customer facilities. The Critical ...

Perform equipment harvesting, parts testing, and evaluation across assigned modalities * Troubleshoot common, well-defined system and parts issues using standard methods * Interpret test results to ...

Electro-Mechanical Tech 3

Lebanon, TN · On-site

$28 - $33.50/hr

Performs routine maintenance and equipment testing to ensure they meet specifications. * Respond to service calls; diagnose root causes to correct equipment failures and faults. * Promptly Identify ...

Die Cast Operator

Lewisburg, TN

$15.50 - $18.25/hr

Must be able to pass powered lift equipment testing. Travel or Physical Demands: * Must be able to work in hot/cold environment. * Sitting * Walking * Standing * Climbing * Kneeling * Kneel/Crouch

Electro-Mechanical Tech 3

Lebanon, TN · On-site

$28 - $33.50/hr

Performs routine maintenance and equipment testing to ensure they meet specifications. * Respond to service calls; diagnose root causes to correct equipment failures and faults. * Promptly Identify ...

Electro-Mechanical Tech 3

Lebanon, TN · On-site

$28 - $33.50/hr

Performs routine maintenance and equipment testing to ensure they meet specifications. * Respond to service calls; diagnose root causes to correct equipment failures and faults. * Promptly Identify ...

Die Cast Operator

Lewisburg, TN · On-site

$15.50 - $18.25/hr

Must be able to pass powered lift equipment testing. Travel or Physical Demands: * Must be able to work in hot/cold environment. * Sitting * Walking * Standing * Climbing * Kneeling * Kneel/Crouch

Equipment Testing: Coordinate comprehensive technical testing for new equipment, including electrical, automation, water, CIP, and product system integrations.Commissioning & Training: Lead equipment ...

Equipment Testing: Coordinate comprehensive technical testing for new equipment, including electrical, automation, water, CIP, and product system integrations. * Commissioning & Training: Lead ...

Must comply with Federal Department of Transportation (DOT) Alcohol and Drug testing rules as a ... equipment: front-end loader, back-hoe loader, track-hoe, excavator, motor grader skid steer (bob ...

New

Performs complex maintenance and equipment testing to ensure they meet specifications. * Aids with training customers to operate equipment. * Respond to service calls and correct equipment failures ...

Ability to pass pre-employment background check, drug screening, and ongoing random testing Preferred Qualifications - Utility Equipment Operator * Previous construction, utilities, or heavy ...

Showing results 41-60

Equipment Testing information

What cities in Tennessee are hiring for Equipment Testing jobs?

Cities in Tennessee with the most Equipment Testing job openings:

Infographic showing various Equipment Testing job openings in Tennessee as of August 2026, with employment types broken down into 1% As Needed, 79% Full Time, 15% Part Time, 1% Temporary, 3% Contract, and 1% Nights. Highlights an 98% Physical, 1% Hybrid, and 1% Remote job distribution.

HVAC Engineer (3926)

Navarro Inc.

Oak Ridge, TN • On-site

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 15 days ago


Job description

Navarro Research and Engineering is recruiting an HVAC Engineer (3926) for a new Nuclear Fuel Facility. 

Navarro is an award-winning provider of turnkey solutions, delivering comprehensive nuclear, environmental and technical services to federal agencies, commercial enterprises and private clients across the United States. Our expertise supports organizations such as the Department of Energy, the National Nuclear Security Administration, the Department of Defense and NASA, while also extending to commercial industries and private sector partners facing complex engineering, technical and environmental challenges. Navarro specializes in nuclear operations, environmental remediation, D&D, waste management, advanced energy, facilities management, and technical and professional services. For more information, please visit Navarro-inc.com. 

Position Summary 

The HVAC Engineer will support ventilation, heating, cooling, air handling, heat exchanger, fan, rotating equipment, piping, and ducting systems for a new nuclear fuel facility. This role will develop and review HVAC design deliverables for nuclear, chemical, high-hazard, and regulated facility areas where ventilation performance, confinement, reliability, maintainability, and safety requirements are critical. 

The position requires an HVAC engineer with experience coordinating ventilation systems with process equipment, hot cells, building ducting, mechanical systems, nuclear safety requirements, construction, commissioning, and operations. 

Responsibilities 

  • Develop, review, and maintain HVAC calculations, airflow diagrams, equipment sizing, duct layouts, piping layouts, equipment specifications, design criteria, and technical basis documents. 
  • Support HVAC systems involving nuclear ventilation, confinement ventilation, process exhaust, heat exchangers, fans, rotating equipment, coils, dampers, filters, ducting, and piping interfaces. 
  • Evaluate ventilation performance, pressure relationships, heat loads, equipment capacity, system reliability, maintainability, and field routing constraints. 
  • Review vendor submittals for fans, heat exchangers, air handling units, filtration equipment, rotating equipment, dampers, coils, instrumentation interfaces, and related HVAC components. 
  • Coordinate HVAC design interfaces with process engineering, piping, mechanical, I&C, electrical, civil/structural, fire protection, safety basis, radiological controls, quality, construction, commissioning, and operations teams. 
  • Support design reviews, hazard reviews, constructability reviews, field walkdowns, commissioning planning, functional testing, and turnover activities. 
  • Prepare engineering calculations, specifications, technical evaluations, field change documents, and issue-resolution packages. 
  • Maintain configuration control, quality expectations, safety requirements, and clear communication with project leadership. 

Requirements

Requirements 

  • Bachelor's degree in mechanical engineering, architectural engineering, or a closely related engineering discipline. 
  • 5+ years of HVAC engineering experience supporting nuclear, DOE, chemical, high-hazard, industrial, laboratory, manufacturing, or regulated facility projects. 
  • Experience with nuclear or high-consequence ventilation systems, heat exchangers, fans and rotating equipment, piping, ducting, airflow calculations, and equipment sizing. 
  • Ability to interpret HVAC drawings, P&IDs, duct layouts, equipment specifications, vendor data, safety requirements, and field conditions. 
  • Knowledge of ventilation design, ductwork, pressure control, heat transfer, mechanical equipment, testing, balancing, and commissioning principles. 
  • Strong technical writing, analytical, communication, and cross-discipline coordination skills. 
  • Ability to obtain and maintain required site access, training, and security clearances. 
  • Due to the nature of the government contract requirements and/or clearances requirements, US citizenship is required. 

Preferred Qualifications 

  • Experience with nuclear fuel facilities, hot cells, gloveboxes, confinement ventilation, HEPA filtration, process exhaust, GTS support systems, or radiological facilities. 
  • Experience with ASHRAE, SMACNA, ASME, DOE nuclear ventilation expectations, or safety significant ventilation systems. 
  • Professional Engineer license, Engineer-in-Training certification, or commissioning/test experience. 
  • Active DOE L or Q clearance. 

Education and Experience 

Bachelor's degree in mechanical engineering, architectural engineering, or a related engineering discipline and 5+ years of relevant experience, or an equivalent combination of education and experience. 

Due to the nature of the government contract requirements and/or clearances requirements, US citizenship is required. 

Navarro is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, religion, color, national origin, age, disability, veteran's status, or any classification protected by applicable state or local law. 

EEO Employer/Vet/Disabled 

Benefits

  • Health Care Plan (Medical, Dental & Vision)
  • Retirement Plan (401k)
  • Life Insurance (Basic, Voluntary & AD&D)
  • Paid Time Off (Vacation & Public Holidays)
  • Short Term & Long Term Disability