ZipRecruiter

Log In

2

Entry Level Instrumentation & Controls Engineer Jobs in Shreveport, LA

Manifest Solutions

Plant Engineer

Shreveport, LA · On-site

... controls diagnostics), ensuring accurate data interpretation and follow-through on identified ... Experience with control systems, instrumentation, and performance monitoring tools used to optimize ...

Manifest Solutions Corp.

Plant Engineer

Shreveport, LA · On-site

... controls diagnostics), ensuring accurate data interpretation and follow-through on identified ... Experience with control systems, instrumentation, and performance monitoring tools used to optimize ...

Manifest Solutions

Plant Engineer

Shreveport, LA

... controls diagnostics), ensuring accurate data interpretation and follow-through on identified ... Experience with control systems, instrumentation, and performance monitoring tools used to optimize ...

US Navy

Nuclear Engineer

Waskom, TX

$80K - $96K/yr

... instrumentation and control for reactor and propulsion plants, testing and quality control ... controls; review designs and analyses from laboratories, shipyards, and industry partners ...

US Navy

Nuclear Engineer

Minden, LA

$82K - $98K/yr

... instrumentation and control for reactor and propulsion plants, testing and quality control ... controls; review designs and analyses from laboratories, shipyards, and industry partners ...

US Navy

Nuclear Engineer

Shreveport, LA

$97K - $117K/yr

... instrumentation and control for reactor and propulsion plants, testing and quality control ... controls; review designs and analyses from laboratories, shipyards, and industry partners ...

US Navy

Nuclear Engineer

Marshall, TX

$80K - $96K/yr

... instrumentation and control for reactor and propulsion plants, testing and quality control ... controls; review designs and analyses from laboratories, shipyards, and industry partners ...

US Navy

Nuclear Engineer

Mansfield, LA

$79K - $94K/yr

... instrumentation and control for reactor and propulsion plants, testing and quality control ... controls; review designs and analyses from laboratories, shipyards, and industry partners ...

US Navy

Nuclear Engineer

Mooringsport, LA

$92K - $111K/yr

... instrumentation and control for reactor and propulsion plants, testing and quality control ... controls; review designs and analyses from laboratories, shipyards, and industry partners ...

DXP

Test Lab Engineer

Shreveport, LA · On-site

Basic knowledge of low voltage circuits, electronic controls, instrumentation, and control loops ... Major of study in Engineering or Industrial Technology preferred. Location: USA:LA:Shreveport DXP ...

DXP

Test Lab Engineer

Shreveport, LA

Basic knowledge of low voltage circuits, electronic controls, instrumentation, and control loops ... Major of study in Engineering or Industrial Technology preferred. Location: USA:LA:Shreveport DXP ...

DXP Enterprises, Inc.

Test Lab Engineer

Shreveport, LA · On-site

Basic knowledge of low voltage circuits, electronic controls, instrumentation, and control loops ... Major of study in Engineering or Industrial Technology preferred. Location: USA:LA:Shreveport DXP ...

DXP Enterprises, Inc.

Test Lab Engineer

Shreveport, LA · On-site

Basic knowledge of low voltage circuits, electronic controls, instrumentation, and control loops ... Major of study in Engineering or Industrial Technology preferred. Location: USA:LA:Shreveport DXP ...

Honeywell

Technician-Electronic-Level 3

Shreveport, LA · On-site

... and motor controls * Know and troubleshoot various types of lighting, lighting fixtures, and photocells Qualifications YOU MUST HAVE * Minimum of 2 years of experience in Instrumentation and ...

next page

Showing results 1-20

All JobsInstrumentation & Controls Engineer JobsEntry Level Instrumentation & Controls Engineer JobsEntry Level Instrumentation & Controls Engineer Jobs in Shreveport, LA

Entry Level Instrumentation Controls Engineer information

See Shreveport, LA salary details

$28

$54

$81

How much do entry level instrumentation & controls engineer jobs pay per hour?

As of Aug 19, 2026, the average hourly pay for entry level instrumentation & controls engineer in Shreveport, LA is $54.05, according to ZipRecruiter salary data. Most workers in this role earn between $42.16 and $61.49 per hour, depending on experience, location, and employer.

What does an entry level instrumentation & controls engineer do?

An Entry Level Instrumentation & Controls Engineer assists with the design, installation, and maintenance of systems that measure and control industrial processes. They work under the supervision of senior engineers to develop control systems, select appropriate instruments, and ensure that equipment operates safely and efficiently. Typical responsibilities include preparing technical documentation, troubleshooting control systems, and supporting project execution. This role often serves as a starting point for engineers interested in automation, process control, or industrial systems.

What types of projects and tasks can an entry level instrumentation & controls engineer expect to work on in their first year?

As an Entry Level Instrumentation & Controls Engineer, you can expect to assist with designing, configuring, and testing control systems for industrial processes, such as those found in power plants, manufacturing, or water treatment facilities. Your responsibilities may include creating wiring diagrams, selecting and specifying instrumentation, supporting field installations, and collaborating with senior engineers or project managers. You'll also likely help troubleshoot control system issues and participate in commissioning activities, providing valuable hands-on experience. This role offers a blend of office-based design work and on-site support, giving you exposure to both technical and practical aspects of engineering projects.

What are the key skills and qualifications needed to thrive as an entry level instrumentation & controls engineer, and why are they important?

To thrive as an Entry Level Instrumentation & Controls Engineer, you need a degree in electrical, mechanical, or control systems engineering and a solid understanding of process control fundamentals. Familiarity with PLC/DCS programming, SCADA systems, and industry-standard software like AutoCAD or MATLAB is typically required, and certifications such as EIT/FE can be advantageous. Strong analytical thinking, attention to detail, and effective teamwork and communication skills help you excel in collaborative engineering environments. These competencies ensure accurate system design, smooth project execution, and effective troubleshooting in complex industrial settings.

What is the difference between Entry Level Instrumentation & Controls Engineer vs Entry Level Electrical Engineer?

AspectEntry Level Instrumentation & Controls EngineerEntry Level Electrical Engineer
CredentialsBachelor's in Electrical, Mechanical, or Controls Engineering; certifications like CAP or ISA are a plusBachelor's in Electrical Engineering; PE license optional for entry level
Work EnvironmentIndustrial plants, manufacturing facilities, automation systemsPower plants, electronics manufacturing, construction sites
Employer & Industry UsageProcess industries, automation companies, oil & gas, manufacturingUtilities, electronics, consulting firms, construction
Common Search & ComparisonYesYes

The main difference is that Entry Level Instrumentation & Controls Engineers focus on designing, installing, and maintaining control systems and instrumentation used in industrial processes, while Entry Level Electrical Engineers work on electrical systems, power distribution, and circuitry. Both roles require similar educational backgrounds and certifications but serve different technical functions within the industry.

What are popular job titles related to Entry Level Instrumentation & Controls Engineer jobs in Shreveport, LA?

For Entry Level Instrumentation & Controls Engineer jobs in Shreveport, LA, the most frequently searched job titles are:

What job categories do people searching Entry Level Instrumentation & Controls Engineer jobs in Shreveport, LA look for?

The top searched job categories for Entry Level Instrumentation & Controls Engineer jobs in Shreveport, LA are:

What cities near Shreveport, LA are hiring for Entry Level Instrumentation & Controls Engineer jobs?

Cities near Shreveport, LA with the most Entry Level Instrumentation & Controls Engineer job openings:

Entry Level Instrumentation Controls Engineer jobs near you
Infographic showing various Entry Level Instrumentation & Controls Engineer job openings in Shreveport, LA as of August 2026, with employment types broken down into 91% Full Time, 5% Part Time, and 4% Contract. Highlights an 87% Physical, 5% Hybrid, and 8% Remote job distribution, with an average salary of $112,428 per year, or $54.1 per hour.

Pipeline Engineer Shreveport, LA

Kinder Morgan

Shreveport, LA • On-site

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 2 days ago

Kinder Morgan rating

8.6

Company rating: 8.6 out of 10

Based on 95 frontline employees who took The Breakroom Quiz

11th of 53 rated energy and utility

Job description

What We Are Looking For
Kinder Morgan is one of the largest energy infrastructure companies in North America. We own an interest in or operate approximately 84,000 miles of pipelines and 157 terminals. Our pipelines transport natural gas, gasoline, crude oil, carbon dioxide (CO2) and more. Our terminals store and handle various commodities including gasoline, diesel fuel, jet fuel, chemicals, metals, petroleum coke and ethanol and other renewable fuels and feedstocks.
Kinder Morgan is committed to being a good corporate citizen and conducting ourselves in an ethical and responsible manner. We spend hundreds of millions of dollars each year on integrity management and maintenance programs to operate our assets safely and to protect the public, our employees, contractors and the environment. Operationally, we continue to perform better than our industry peers relative to environmental, health and safety measures.
The Pipeline Engineer position is based out of our Kinderhawk office located at 9580 Saint Vincent Avenue, Shreveport, LA 71106. This is a typical Monday through Friday position with potential on-call responsibilities nights and weekends. Kinder Morgan offers a robust benefits package including medical, dental, vision, life insurance, two retirement plans, paid holidays, and paid time off.
To be considered for our Shreveport Pipeline Engineer job, click on "Apply Now" to sign in or create an account to upload your resume. This is a great opportunity if you are an experienced Process Engineer, Process Controls Engineer, Gas Gathering & Processing Engineer, or similar.
Primary purpose:
  • Support installation, maintenance, and operation of new & existing gas gathering plant operations through process optimization, improved efficiency, and identification of opportunities to improve overall operating area performance as well as safety, operability, and reliability

Essential duties and responsibilities:
  • Evaluate, prepare and analyze designs of process systems including NGL recovery plants, amine treating plants, glycol dehydration, molecular sieve dehydration, propane refrigeration, condensate stabilization, inlet compression, & residue compression
  • Design gas and liquid pipelines, meter stations, compressor stations, and pump stations
  • Develop single and multi-phase gas hydraulic models and gathering system evaluations
  • Develop station process simulations and material & energy balances using ProMax software
  • Size and specify mechanical equipment, including separators, filters, tanks, heat exchangers, air coolers, pumps, towers, heaters, compressors, control valves, treaters, and dehydrators
  • Specify appropriate piping materials, diameters, and thicknesses to meet design requirements
  • Possess knowledge of midstream process controls and instrumentation, including controls narrativeand cause & effect matrices
  • Model and evaluate gas plants and suggest efficiency and debottlenecking projects
  • Provide technical support for startups, troubleshooting, and plant expansions
  • Participate in PHA/Hazop studies/PSSR as necessary for both new and existing facilities
  • Facilitate and lead Management of Change (MOC) requirements
  • Assist applicable parties to establish facility start-up (including PSSR), commissioning, and operating procedures.
  • Complete and/or validate facility flare & PSV studies using KM's OPP Tool
  • Perform Facility PFD/P&ID development & reviews as needed
  • Work closely with Project Managers regarding Front-End process design, finalizing H&MB & overall major project scope; assist in evaluations of changes in basis of design as necessary
  • Provide technical support to operations (including troubleshooting, debottlenecking and optimization, maintenance projects, PHA participation and action item resolution, DOT/PHMSA/LADNR compliance, etc.)
  • Provides technical assistance in the form of written reports, consultation, research, process debottlenecking studies, & code interpretations
  • Investigates and resolves problems associated with new or existing facilities and their process design, including conducting research into project-related issues and finding equipment needed for a project
  • Initiate and manage optimization review projects to enhance safety, run time, and/or operating income
  • Proactively seek opportunities to learn and develop and to find solutions for maximizing value to the business unit
  • Continuously review assets to enhance safety, mechanical reliability, operational flexibility, and capacity
  • Consult with environmental personnel and provide information that is pertinent to the facility's environmental permits that are required
  • Complete appropriate documentation and paperwork
  • Perform all work in compliance with Company standards, procedures, regulatory and tariff requirements
  • Work safely when performing duties while fully embracing safety programs including but not limited to safety observations, job safety analysis, last minute risk assessments, safe driving, cell phone policy, etc.
  • Respond timely in communications
  • Demonstrate a positive attitude that creates a good work environment
  • Must be self-motivated
  • What You Will Do
    Education:
    • BS degree in Chemical & Mechanical Engineering from 4-year accredited university

    Experience / specific knowledge:
    • Minimum 3-5 years of experience in natural gas gathering, compression, processing, dehydration, fractionation, construction, and/or operations
    • Possess fundamental knowledge of midstream gas gathering and processing operations, including pig liquids handling, compression, glycol and desiccant dehydration, treating, hydrocarbon recovery, and condensate stabilization
    • Possess knowledge of codes, standards, regulations and best practices applicable to the midstream industry (including API, ASME B31.3/4/8 and VIII, DOT 192/5, NFPA, etc.)
    • Perform process simulation and pipeline modeling experience with HYSYS, PROMAX, WinSim, WinFlow, Synergee, FlareNet, or similar applications
    • Possess knowledge and experience with rotating equipment

    Certifications, licenses, registrations:
    • Must possess and maintain valid driver's license and a driving record satisfactory to the company and its insurers
    • Achieve and maintain all qualifications, certifications, and progression requirements applicable to the job classification
    • Completion of any site-specific technical training that may be assigned

    Competencies, skills, and abilities:
    • Strong work ethic with demonstrated ability to effectively work with minimum supervision
    • Must respond to, and address, callouts and emergencies during and after regular business hours including after dark hours, which requires carrying a communication device
    • Ability to complete work assignments with minimal supervision in an acceptable time frame
    • Solid computer skills to include Microsoft Office Software (Excel, Word, Powerpoint), MS Project, Maximo, etc.
    • Ability to interpret and design Process Flow Diagrams (PFDs), Piping & Instrumentation Diagrams (P&IDs), Plot Plans, Piping Plans, and Piping Isometrics
    • Ability to interface effectively with all levels within the company as well as organizations outside the company
    • Experience in process modeling applications such as HYSYS, PROMAX, or VMGSim
    • Must be able to learn, understand, and apply new technologies
    • Ability to effectively prioritize andexecute tasks in a high-pressure environment is crucial
    • Regularly scheduled, reliable, and on-time attendance
    • Ability to effectively organize, plan, prioritize, document, and complete work independently
    • Ability to successfully work in team environment
    • Must be able to take direction from supervisor(s), prioritize work schedule, focus attention on details, and follow rules
    • Must possess strong written and verbal communication skills
    • Follow safe work practices and actively participate in the safety program
    • The successful candidate will be required to clear a drug screen and a complete background check, after an offer has been extended and prior to being employed

    Working Conditions / Physical demands:
    • Essentially indoors, but must be able to work outdoors as needed
    • Must be able to handle stress of meeting deadlines
    • Must be able to walk over uneven surfaces on the pipeline right-of-way or at field facilities
    • Must be able to withstand extreme weather conditions
    • Must be able to work while wearing appropriate personal protective equipment such as, hard hat, safety glasses, flame retardant clothing, steel toe footwear, respirator, etc.
    • Must be able to frequently enter confined spaces, climb stairs, climb to and work from elevated platforms, excavated areas, ladders, walkways, etc.
    • Must be able to lift a minimum of 20 pounds in awkward positions, lift 26 to 50 pounds from floor to waist occasionally, and 51 to 100 pounds if required
    • May work in low-lit areas

    Preferred experience, skills, certifications, and knowledge (above the minimum requirements; not required but advantageous in this position):
    • Experience with third party equipment manufacturer sizing software applicable to the gas processing industry
    • Experience with Microsoft Project or Primavera P6
    • Knowledge of AutoCAD, Plant3D or CADWork

    Other responsibilities:
    • Represent and support local operations during design review, HASOP and planning reviews of all expansion projects, during planning and execution
    • Ability to develop and maintain pipeline gathering
      What You Need
      Education:
      • BS degree in Chemical & Mechanical Engineering from 4-year accredited university

      Experience / specific knowledge:
      • Minimum 3-5 years of experience in natural gas gathering, compression, processing, dehydration, fractionation, construction, and/or operations
      • Possess fundamental knowledge of midstream gas gathering and processing operations, including pig liquids handling, compression, glycol and desiccant dehydration, treating, hydrocarbon recovery, and condensate stabilization
      • Possess knowledge of codes, standards, regulations and best practices applicable to the midstream industry (including API, ASME B31.3/4/8 and VIII, DOT 192/5, NFPA, etc.)
      • Perform process simulation and pipeline modeling experience with HYSYS, PROMAX, WinSim, WinFlow, Synergee, FlareNet, or similar applications
      • Possess knowledge and experience with rotating equipment

      Certifications, licenses, registrations:
      • Must possess and maintain valid driver's license and a driving record satisfactory to the company and its insurers
      • Achieve and maintain all qualifications, certifications, and progression requirements applicable to the job classification
      • Completion of any site-specific technical training that may be assigned

      Competencies, skills, and abilities:
      • Strong work ethic with demonstrated ability to effectively work with minimum supervision
      • Must respond to, and address, callouts and emergencies during and after regular business hours including after dark hours, which requires carrying a communication device
      • Ability to complete work assignments with minimal supervision in an acceptable time frame
      • Solid computer skills to include Microsoft Office Software (Excel, Word, Powerpoint), MS Project, Maximo, etc.
      • Ability to interpret and design Process Flow Diagrams (PFDs), Piping & Instrumentation Diagrams (P&IDs), Plot Plans, Piping Plans, and Piping Isometrics
      • Ability to interface effectively with all levels within the company as well as organizations outside the company
      • Experience in process modeling applications such as HYSYS, PROMAX, or VMGSim
      • Must be able to learn, understand, and apply new technologies
      • Ability to effectively prioritize andexecute tasks in a high-pressure environment is crucial
      • Regularly scheduled, reliable, and on-time attendance
      • Ability to effectively organize, plan, prioritize, document, and complete work independently
      • Ability to successfully work in team environment
      • Must be able to take direction from supervisor(s), prioritize work schedule, focus attention on details, and follow rules
      • Must possess strong written and verbal communication skills
      • Follow safe work practices and actively participate in the safety program
      • The successful candidate will be required to clear a drug screen and a complete background check, after an offer has been extended and prior to being employed

      Working Conditions / Physical demands:
      • Essentially indoors, but must be able to work outdoors as needed
      • Must be able to handle stress of meeting deadlines
      • Must be able to walk over uneven surfaces on the pipeline right-of-way or at field facilities
      • Must be able to withstand extreme weather conditions
      • Must be able to work while wearing appropriate personal protective equipment such as, hard hat, safety glasses, flame retardant clothing, steel toe footwear, respirator, etc.
      • Must be able to frequently enter confined spaces, climb stairs, climb to and work from elevated platforms, excavated areas, ladders, walkways, etc.
      • Must be able to lift a minimum of 20 pounds in awkward positions, lift 26 to 50 pounds from floor to waist occasionally, and 51 to 100 pounds if required
      • May work in low-lit areas

      Preferred experience, skills, certifications, and knowledge (above the minimum requirements; not required but advantageous

What Kinder Morgan employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Kinder Morgan logo

About Kinder Morgan

Sourced by ZipRecruiter

Kinder Morgan is moving the fuels of today for the energy of the future. From the natural gas that heats your home to the gasoline that fuels your vehicle, our pipeline and terminal assets provide the necessary infrastructure to meet today's growing global energy demand and play a key role in the low-carbon energy transition of the future.

Industry

Oil and gas extraction

Company size

10,000+ Employees

Headquarters location

Houston, TX, US

Year founded

1997

Social media

FacebookTwitter

View All Kinder Morgan Jobs

Apply