Welder
Sauk Centre, MN · On-site
$21 - $30/hr
The Welder is responsible for cutting, fitting and welding metal materials and assuring that ... Essential Specific Job Duties: 1. Performs successfully all responsibilities of the Entry Level ...
Welder
Sauk Centre, MN · On-site
$21 - $30/hr
The Welder is responsible for cutting, fitting and welding metal materials and assuring that ... Essential Specific Job Duties: 1. Performs successfully all responsibilities of the Entry Level ...
Welder
$21 - $30/hr
The Welder is responsible for cutting, fitting and welding metal materials and assuring that ... Essential Specific Job Duties: 1. Performs successfully all responsibilities of the Entry Level ...
Welder
$21 - $30/hr
The Welder is responsible for cutting, fitting and welding metal materials and assuring that ... Essential Specific Job Duties: 1. Performs successfully all responsibilities of the Entry Level ...
Entry Level Gas Cutter information
See Brooten, MN salary details
$8.06 - $9.20
1% of jobs
$9.20 - $10.33
0% of jobs
$10.33 - $11.46
1% of jobs
$11.46 - $12.60
4% of jobs
$12.60 - $13.73
1% of jobs
$13.73 - $14.86
12% of jobs
$15.40 is the 25th percentile. Wages below this are outliers.
$14.86 - $16
12% of jobs
The median wage is $17.10 / hr.
$16 - $17.13
19% of jobs
$18.05 is the 75th percentile. Wages above this are outliers.
$17.13 - $18.26
30% of jobs
$18.26 - $19.40
12% of jobs
$19.40 - $20.53
8% of jobs
$8
$16
$20
How much do entry level gas cutter jobs pay per hour?
As of Aug 19, 2026, the average hourly pay for entry level gas cutter in Brooten, MN is $16.76, according to ZipRecruiter salary data. Most workers in this role earn between $14.66 and $18.56 per hour, depending on experience, location, and employer.
What is an entry level gas cutter?
Entry level gas cutters are workers who use specialized equipment to cut metal materials, typically using a process called oxy-fuel cutting, which combines fuel gases and oxygen to cut through steel and other metals. They usually work under the supervision of more experienced technicians and are responsible for tasks such as preparing materials, setting up cutting equipment, and following safety protocols. This role is common in manufacturing, construction, and metal fabrication industries, and typically requires basic training or on-the-job instruction rather than advanced education. Entry level gas cutters must pay close attention to safety and precision to ensure clean cuts and prevent accidents. Over time, they can advance to more skilled positions as they gain experience.
What are the key skills and qualifications needed to thrive as an entry level gas cutter?
Success as an Entry Level Gas Cutter requires basic mechanical aptitude, understanding of metal properties, and a high school diploma or equivalent. Familiarity with oxy-fuel cutting equipment, safety gear, and adherence to workplace safety standards are typically necessary, and OSHA certification is often beneficial. Attention to detail, strong hand-eye coordination, and the ability to follow instructions help individuals stand out in this role. These skills and qualifications are vital to ensure precise cuts, maintain safety, and contribute effectively to manufacturing or construction teams.
What are some common safety challenges faced by entry level gas cutters, and how are they addressed on the job?
Entry-level gas cutters often encounter safety challenges such as handling flammable gases, exposure to high temperatures, and working around sparks or molten metal. To address these risks, employers provide thorough safety training, require the use of personal protective equipment (PPE) like goggles, gloves, and flame-resistant clothing, and enforce strict adherence to safety protocols. Team members and supervisors also routinely conduct safety checks and encourage open communication about potential hazards to maintain a safe work environment.
What is the difference between Entry Level Gas Cutter vs Entry Level Welder?
| Aspect | Entry Level Gas Cutter | Entry Level Welder |
|---|---|---|
| Required Certifications | OSHA safety training, possibly a gas cutting certification | Welding certifications like AWS or state-specific licenses |
| Work Environment | Construction sites, manufacturing plants, shipyards | Fabrication shops, construction sites, manufacturing facilities |
| Industry Usage | Heavy industry, shipbuilding, metal fabrication | Construction, manufacturing, repair industries |
Both roles require safety training and industry-specific certifications. Gas cutters focus on cutting metals with oxy-fuel equipment, while welders join metals using welding techniques. While their work environments overlap, their skills and certifications differ, making each role distinct within heavy industry sectors.
Job description
$2500 Hiring Bonus!
The Welder is responsible for cutting, fitting and welding metal materials and assuring that company standards and customers' specifications are met.
Essential Specific Job Duties:
1. Performs successfully all responsibilities of the Entry Level Welder position.
2. Reads and interprets blueprints with detailed drawings and dimension styles.
3. Prepares weld surfaces as required.
4. Passes all required welding qualifications.
5. Sets up, positions and operates hand and power tools such as Gas Metal Arc and Flux Core Arc Welding Equipment.
6. Determines welder settings required on project.
7. Verifies final weld penetration and aesthetics.
8. Welds prep and fit-up of steel parts.
9. Welds according to all appropriate codes and procedures.
10. Uses basic measuring skills.
11. Performs work creating little re-work.
12. Monitors quality of weld using appropriate tools and measuring devices.
13. Checks welding process to avoid overheating of parts or warping, shrinking, distortion or expansion of material.
14. Performs grinding, gouging, chipping operating a grinder, cutting torch, etc.
15. Operates forklift, as needed, according to safe operating procedures.
16. Performs all functions safely and follows all safety standards and procedures.
17. Adheres to quality standards at all times.
18. Adheres to safety standards at all times.
Essential Universal Job Duties:
19. Improves self in any way possible to enhance job performance.
20. Promotes Felling Trailers, Inc., its mission, values, programs and achievements to the public and other employees.
21. Identifies organizational problems and opportunities for improvement and brings solutions and suggestions to management's attention.
22. Functions as a team member by assisting, supporting and encouraging other employees in any way possible
Non-Essential Job Duties:
23. Performs related work as required, willingly and eagerly.
Job Specifications:
Education: High School
Related Experience: 2 years
Supervision Given: None
Supervision Received: Welding Supervisor
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EEOE - Felling Trailers, Inc. is committed to the principles of Equal Employment Opportunity. We believe our continued success depends on the full and effective utilization of qualified persons regardless of race, color, creed, religion, national origin, sex, age, disability, marital status, sexual preference, status with regard to public assistance, or other classification protected by law. All team member recruiting, hiring, training, compensation, benefits, transfers, promotions, social or recreational programs, and on-the-job treatment is to be administered in accordance with this commitment.
The Welder is responsible for cutting, fitting and welding metal materials and assuring that company standards and customers' specifications are met.
Essential Specific Job Duties:
1. Performs successfully all responsibilities of the Entry Level Welder position.
2. Reads and interprets blueprints with detailed drawings and dimension styles.
3. Prepares weld surfaces as required.
4. Passes all required welding qualifications.
5. Sets up, positions and operates hand and power tools such as Gas Metal Arc and Flux Core Arc Welding Equipment.
6. Determines welder settings required on project.
7. Verifies final weld penetration and aesthetics.
8. Welds prep and fit-up of steel parts.
9. Welds according to all appropriate codes and procedures.
10. Uses basic measuring skills.
11. Performs work creating little re-work.
12. Monitors quality of weld using appropriate tools and measuring devices.
13. Checks welding process to avoid overheating of parts or warping, shrinking, distortion or expansion of material.
14. Performs grinding, gouging, chipping operating a grinder, cutting torch, etc.
15. Operates forklift, as needed, according to safe operating procedures.
16. Performs all functions safely and follows all safety standards and procedures.
17. Adheres to quality standards at all times.
18. Adheres to safety standards at all times.
Essential Universal Job Duties:
19. Improves self in any way possible to enhance job performance.
20. Promotes Felling Trailers, Inc., its mission, values, programs and achievements to the public and other employees.
21. Identifies organizational problems and opportunities for improvement and brings solutions and suggestions to management's attention.
22. Functions as a team member by assisting, supporting and encouraging other employees in any way possible
Non-Essential Job Duties:
23. Performs related work as required, willingly and eagerly.
Job Specifications:
Education: High School
Related Experience: 2 years
Supervision Given: None
Supervision Received: Welding Supervisor
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EEOE - Felling Trailers, Inc. is committed to the principles of Equal Employment Opportunity. We believe our continued success depends on the full and effective utilization of qualified persons regardless of race, color, creed, religion, national origin, sex, age, disability, marital status, sexual preference, status with regard to public assistance, or other classification protected by law. All team member recruiting, hiring, training, compensation, benefits, transfers, promotions, social or recreational programs, and on-the-job treatment is to be administered in accordance with this commitment.
About Felling Trailers
Sourced by ZipRecruiter
Industry
Trucking
Company size
201 - 500 Employees
Headquarters location
Sauk Centre, MN, US
Year founded
1954