ZipRecruiter

Log In

1

Electronic Product Testing Jobs in Missouri (NOW HIRING)

Wabtec

Electronics Tester

Kansas City, MO · On-site

$23/hr

... electronic products at various stages of assembly. * Conduct basic repairs on electronic boards and harnesses using soldering techniques. * Reload software and prepare devices for testing using ...

Knorr-Bremse

Electronic Tech 3

Warrensburg, MO · On-site

$29/hr

Production testing on a variety of electronic products * Use test equipment to determine pass/fail requirements * Use of electronic test stands * Ensure personal compliance to Quality Systems ...

Stereotaxis

Senior Electrical Engineer

Saint Louis, MO · On-site

$104K - $136K/yr

... testing, data interpretation, and problem solving to ensure product functionality, safety, and ... to-mid power electronic circuits Circuit card design experience, using Altium Designer ...

Aerotek

Electronics Assembler

Joplin, MO

$26/hr

Interpret testing feedback to confirm that each wire is terminated in the correct connector ... production. * Experience working with circuit boards, wiring, and electronic components in a ...

Wabtec

Senior Electronics Technician

Kansas City, MO · On-site

$26/hr

... production environment, with frequent exposure to office and electronic testing equipment, as well as other environmental factors. Our job titles may span more than one career level. The salary rate ...

Wabtec

Electronics 1- Electronics Assembler

Kansas City, MO · On-site

$16.75 - $21.50/hr

The employee will generally work in a temperature-controlled production environment, with frequent exposure to office and electronic testing equipment, as well as other environmental factors.

Wabtec

Electronics 1- Electronics Assembler

Kansas City, MO · On-site

$16.75 - $21.50/hr

The employee will generally work in a temperature-controlled production environment, with frequent exposure to office and electronic testing equipment, as well as other environmental factors.

Steris Corporation

Repair Technician

Chesterfield, MO · On-site

$21.50/hr

Transferable experience may include hands-on repair, assembly, or product testing. Other transferable experience might include small engine repair, cell phone and electronics repair/ testing/ re ...

next page

Showing results 1-20

All JobsElectronic Product Testing JobsElectronic Product Testing Jobs in Missouri

Electronic Product Testing information

What is the difference between Electronic Product Testing vs Electronic Quality Assurance?

AspectElectronic Product TestingElectronic Quality Assurance
Primary FocusTesting electronic products to identify defects and ensure functionalityImplementing processes to prevent defects and ensure quality standards
Work EnvironmentLaboratories, testing facilities, manufacturing linesQuality departments, manufacturing plants, process audits
CertificationsElectronics testing certifications, QA certificationsISO 9001, Six Sigma, QA-related certifications

Electronic Product Testing primarily involves evaluating electronic devices to detect faults, while Electronic Quality Assurance focuses on establishing and maintaining quality processes to prevent defects. Both roles are essential in electronics manufacturing but differ in their approach—testing is reactive, QA is proactive.

How to become an electronic product tester?

To become an electronic product tester, you typically need a background in electronics or engineering, strong attention to detail, and familiarity with testing tools and software. Gaining experience through internships or entry-level positions in quality assurance or electronics testing can be helpful, and certifications like IPC or ISTQB may improve job prospects.

Is electronic product testing a legitimate job?

Electronic product testing is a legitimate profession involving evaluating electronic devices for quality, safety, and functionality. It often requires knowledge of electronics, testing tools, and sometimes certifications, and can be performed in manufacturing, quality assurance, or research environments.
Electronic Product Testing jobs near you
Infographic showing various Electronic Product Testing job openings in Missouri as of August 2026, with employment types broken down into 79% Full Time, 17% Part Time, 3% Contract, and 1% Nights. Highlights an 88% Physical, 2% Hybrid, and 10% Remote job distribution.

Electronics Tester

Wabtec

Kansas City, MO • On-site

$23/hr

Full-time

Medical, Retirement

Re-posted 4 days ago

Job description

Summary: Our Electronics Testers II is a skilled role responsible for supporting the testing, troubleshooting, and repairing of locomotive electronic devices. This position performs hands-on work inspecting, identifying failures and replacing non-conforming parts in electronic devices.
4800 Deramus Ave, Kansas City, MO 64120 ·
Regular schedule is Monday–Thursday: 5:00 a.m. – 3:30 p.m.
Variations on this schedule will be communicated upon hire.
Duties and Responsibilities:
  • Perform functional tests on electronic products at various stages of assembly.
  • Conduct basic repairs on electronic boards and harnesses using soldering techniques.
  • Reload software and prepare devices for testing using defined procedures.
  • Operate test equipment and tools commonly used in electronics assembly and troubleshooting.
  • Assist in diagnosing low-medium complexity issues at the board level.
  • Interpret and follow technical drawings and standard test procedures.
  • Visually inspect product for quality, labeling and component placement.
  • Identify and locate appropriate product documentation to complete assigned tasks.
  • Complete daily work orders/schedule based on productivity levels assigned by supervisors and line leads.
  • Adapt to changing priorities based on customer demands.
  • Work with IPC 610 recent IPC training, and ESD protocols.
  • Operate within standard operating procedures (SOPs) and Job Safety Analysis (JSAs).
  • Repair and replace electronic components executing engineering instructions which include soldering techniques/requirements.
  • Meet quality standards in line with internal quality assurance requirements, AAR and FRA protocols.
  • Maintain electronics test equipment and ensure test equipment is within calibration date.
  • Monitor and manage chemical shelf life.
  • Willing to cross-train and support other team members as needed.
  • Follow all safety protocols and PPE requirements.
  • Keep the work area clean and organized on a daily basis.
  • Follow 5S protocol.
  • Perform other duties as assigned.

Minimum Qualifications and requirements: (To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.)
  • Preferred: Associate’s degree in electronic technology, or Equivalent military certification or work experience in electronics repair.
  • Preferred: +1 years of experience in electronic testing, troubleshooting or electronics assembly.
  • Familiarity with common test equipment, i.e., oscilloscopes, multi-meters, signal/function generators, frequency counters, ESS Chamber, etc.
  • Ability to read, understand and analyze schematic drawings.
  • Ability to follow written and verbal instructions, test procedures, engineering and graphic work instructions, and technical documentations – accurately and consistently in English.
  • Experience in stand-alone testing of electronic boards.
  • Basic soldering experience and ability to use precision hand tools.

Knowledge, Skills and Abilities:
  • Good working knowledge and experience with testing electronics.
  • Familiar with IPC 610, recent IPC training, and ESD protocols.
  • Background in electronics testing or new electronics manufacturing or remanufacturing production. Prior military electronics experience will be equivalent.
  • Familiarity with Microsoft OS, HyperTerminal, Pro-comm, or Tera Term software for testing.
  • Ability to work in a fast-paced environment.
  • Ability to receive, implement feedback and adapt process, procedural or behavioral changes as needed.

Physical Demands:(The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.)
  • Regularly required to talk and hear.
  • This position requires the ability to perform detailed, precise hand movements using fine motor skills to perform precise tasks.
  • Employee is required to lift and/or move up to 50 pounds on regular basis.
  • Required to see and distinguish small-level components.
  • The position requires the employee to be on-site during scheduled shift to perform daily duties and responsibilities.

Work Environment: (The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.)
The employee will generally work in a temperature-controlled production environment, with frequent exposure to office and electronic testing equipment, as well as other environmental factors.

Our job titles may span more than one career level. The salary rate for this role is currently $23/hr.
The actual salary offered to a candidate may be influenced by a variety of factors, such as: training, transferable skills, work experience, education, business needs, market demands and work location. The base pay range is subject to change and may be modified in the future. More information on offered benefits, which include health, welfare, and retirement, are available at mywabtecbenefits.com. Other benefit offerings for this role may include annual bonus, if eligible.