1

Distributed Control System Operator Jobs in Dallas, TX

Electric System Operator Responsible for monitoring, operating, and controlling the distribution / transmission system via the 24/7 System Operations Control center; responds to system conditions ...

New

Responsible for monitoring, operating, and controlling the distribution / transmission system via the 24/7 System Operations Control center; responds to system conditions, coordinates activities ...

Responsible for monitoring, operating, and controlling the distribution / transmission system via the 24/7 System Operations Control center; responds to system conditions, coordinates activities ...

Control System Engineer

Dallas, TX · On-site

$90K - $100K/yr

Control System Engineer Point of contact: Angela Gray Address: 10925 Miller Rd., Dallas, TX, 75238 ... Familiarity with low-voltage distribution systems: single-phase, split-phase, and three-phase ...

Control System Engineer

Dallas, TX · On-site

$90K - $100K/yr

Control System Engineer Point of contact: Angela Gray Address: 10925 Miller Rd., Dallas, TX, 75238 ... Familiarity with low-voltage distribution systems: single-phase, split-phase, and three-phase ...

... operators, infrastructure providers, and technology partners. The position plays a critical role in aligning system architecture, ensuring integration across mechanical, electrical, and control ...

next page

Showing results 1-20

Distributed Control System Operator information

See Dallas, TX salary details

$11

$24

$38

How much do distributed control system operator jobs pay per hour?

As of Aug 13, 2026, the average hourly pay for distributed control system operator in Dallas, TX is $24.37, according to ZipRecruiter salary data. Most workers in this role earn between $19.28 and $27.60 per hour, depending on experience, location, and employer.

What are some common challenges faced by distributed control system operators, and how can they be managed?

Distributed Control System Operators often encounter challenges such as responding to system alarms, managing equipment malfunctions, and ensuring continuous, safe plant operations. Rapid decision-making and effective communication with maintenance and engineering teams are crucial to minimize downtime and safety risks. Staying updated with system upgrades and participating in regular training also help operators manage new technologies and evolving procedures. Collaboration and strong attention to detail are key to successfully overcoming these challenges.

What is a distributed control system operator?

A Distributed Control System (DCS) Operator is a professional responsible for monitoring, controlling, and optimizing industrial processes using a distributed control system. They ensure that manufacturing plants or industrial facilities run efficiently, safely, and within set parameters by managing process variables such as temperature, pressure, and flow. DCS Operators respond to alarms, troubleshoot issues, and coordinate with other team members to maintain smooth operations. Their role is crucial in industries like oil and gas, power generation, chemical manufacturing, and water treatment.

What is the difference between Distributed Control System Operator vs Control Room Operator?

AspectDistributed Control System OperatorControl Room Operator
CredentialsTechnical certifications in control systems, process operationsBasic operational training, sometimes technical certifications
Work EnvironmentIndustrial plants, manufacturing facilities, energy plantsControl rooms, monitoring stations across various industries
Industry UsagePower plants, oil & gas, manufacturingUtilities, transportation, manufacturing

The Distributed Control System Operator focuses on managing and monitoring complex control systems within industrial environments, often requiring technical certifications. Control Room Operators oversee plant operations from control rooms, ensuring safety and efficiency. While both roles involve monitoring equipment, the DCS Operator specializes in control system management, whereas the Control Room Operator handles overall plant operations.

What are the key skills and qualifications needed to thrive as a distributed control system operator?

To thrive as a Distributed Control System (DCS) Operator, you need a solid understanding of process control, instrumentation, and industrial automation, typically supported by a technical diploma or associate degree in engineering or a related field. Familiarity with DCS platforms such as Honeywell, Siemens, or Emerson, as well as relevant safety certifications and SCADA systems, is usually required. Strong problem-solving abilities, attention to detail, and effective communication skills help operators manage complex systems and respond quickly to issues. These competencies ensure safe, efficient, and reliable plant operations in highly regulated industrial environments.
What are popular job titles related to Distributed Control System Operator jobs in Dallas, TX? For Distributed Control System Operator jobs in Dallas, TX, the most frequently searched job titles are:
What job categories do people searching Distributed Control System Operator jobs in Dallas, TX look for? The top searched job categories for Distributed Control System Operator jobs in Dallas, TX are:
What cities near Dallas, TX are hiring for Distributed Control System Operator jobs? Cities near Dallas, TX with the most Distributed Control System Operator job openings:
Infographic showing various Distributed Control System Operator job openings in Dallas, TX as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $50,693 per year, or $24.4 per hour.

System Operator I - III

City of Denton

Denton, TX • On-site

Other

Posted 2 days ago

New


City Of Denton rating

6.6

Company rating: 6.6 out of 10

Based on 14 frontline employees who took The Breakroom Quiz

728th of 845 rated public administrative organizations


Job description

Electric System Operator

Responsible for monitoring, operating, and controlling the distribution / transmission system via the 24/7 System Operations Control center; responds to system conditions, coordinates activities involving intrastate transmission grid within ERCOT operating guidelines to maximize reliability of the electrical service for the City of Denton citizens and DME customers.

Essential Functions and Other Important Duties

Essential Functions:

  • Monitors, analyzes, and responds to electric system conditions by monitoring the flow of electricity through the transmission, substations, and distribution system to the customers
  • Oversees DME's lock-out tag-out program
  • Takes corrective measures during emergencies such as transformer or transmission line failures and routes load around the affected area
  • Keeps electric crews notified of any changes in feeder routes
  • Dispatches troubleshooters for emergency repairs to transmission and distribution feeders and equipment; receives trouble calls from police, fire, and individual customers; relays information to workers assigned to the area in which problem occurs, and utility management concerning system disturbances
  • Monitors instruments to ensure electricity flows through the transmission grid properly
  • Operates load tap changers, voltage transformers, circuit breakers, re-closing relays, and capacitor bank controls through SCADA control system
  • Monitors and operates equipment in substations which change the characteristics of electricity and controls the flow of electricity in and out of substations
  • Controls distribution of electric power over feeder circuits from substations; monitors VAR flow of the system and each individual feeder
  • Keeps up with capacitor banks, switches, and feeder route locations
  • Tags and logs any switches
  • Monitors all feeders for trips or lockouts to minimize outages
  • Maintains availability list
  • Monitors weather and notifies crews of approaching storms
  • Confers with operational/engineering personnel regarding the operation of the electric system
  • Maintain NERC certification through CEHs
  • Complies with NERC standards
  • Authority to implement real time actions to ensure the stable operation of the Bulk Electric System
  • Assists with providing presentations at Department, City and Public meetings as requested
  • Regular and punctual attendance
  • Demonstrates CPR, First Aid and ability to follow all DME and APPA safety rules and regulations
  • Performs other duties as assigned
Job Requirements

Minimum Qualifications / Acceptable Equivalency:

  • System Operator I
    • High School Diploma or GED equivalent
    • Must be computer literate and proficient in MS Office
    • 1 year of experience in electrical or related field
    • Must be able to obtain North American Reliability Council (NERC) Certification as a Transmission System Operator within twenty-four (24) months of employment
    OR
    • Any combination of related education, experience, certifications and licenses that will result in a candidate successfully performing the essential functions of the job
  • System Operator II
    • High School Diploma or GED equivalent
    • Must be computer literate and proficient in MS Office
    • 2 years of experience in a 24/7 Electric System Operations Control Center
    • Must be able to obtain North American Reliability Council (NERC) Certification as a Transmission System Operator within twelve (12) months of employment
    OR
    • Any combination of related education, experience, certifications and licenses that will result in a candidate successfully performing the essential functions of the job
  • System Operator III
    • High School Diploma or GED equivalent
    • Must be computer literate and proficient in MS Office
    • 2 years of experience in a 24/7 Electric System Operations Control Center
    • Must have North American Reliability Council (NERC) Certification as a Transmission System Operator or higher upon hire
    OR
    • Any combination of related education, experience, certifications and licenses that will result in a candidate successfully performing the essential functions of the job
  • Core Competencies
    • Ability to respond to off shift emergency call out (will be one of the first employees called to help with system operation / dispatch during major outages)
    • Ability to communicate effectively both verbally and written
    • Ability to get along with customers and co-workers
  • Ability to maintain regular and punctual attendance
  • Preferences
    • Bilingual in Spanish and English
    • Experience in Dispatch or in an electric system operation
    • Proficient in the use of a computer
    • Experience in a municipal government electric utility department
    • ERCOT System Operator Certification
  • Conditions of Employment
    • Must have a valid Class "C" Driver's License and valid state required minimum automobile liability insurance prior to employment (must obtain Texas Class "C" driver's license and state required minimum automobile liability insurance within 90 days of hire per state law)
    • Must pass a drug test, driver's license check, criminal history background check, and social security number verification check
    • Must pass a physical examination
    • Must have and maintain NERC Transmission System Operator Certification or higher
    • Ability to read, understand, and follow departmental safety rules and safe work procedures
    • Ability to work courteously with other employees and customers
    • Ability to lead others in job related matters
Environmental Factors and Conditions/Physical Requirements

Physical Requirements: Overall Strength Demands : The bold and italicized word describes the overall strength demand of the functions performed by the incumbent during a typical workday.

  • Sedentary – lifting no more than 10 pounds
  • Light – lifting no more than 20 pounds; carry up to 10 pounds
  • Medium – lifting no more than 50 pounds, carry up to 25 pounds
  • Heavy – lifting no more than 100 pounds, carry up to 50 pounds
  • Very Heavy – lifting more than 100 pounds, carry more than 50 pounds

Physical Demand Codes: The following describes if the incumbent is expected to exert the following physical demands during a typical workday and the overall frequency. Codes for "how often": Y = Yes N = No E = extensive (100-70%) M = moderate (60-30%) I = infrequent (20-10%) A = almost never (<10%)

  1. Standing: M
  2. Sitting: M
  3. Walking: M
  4. Lifting: A
  5. Carrying: I
  6. Pushing/Pulling: A
  7. Overhead Work: A
  8. Fine Dexterity: M
  9. Kneeling: A
  10. Crouching: A
  11. Crawling: N
  12. Bending: A
  13. Twisting: I
  14. Climbing: M
  15. Balancing: N
  16. Vision: E
  17. Hearing: E
  18. Talking: E
  19. Video Display: E
  20. Other:

Machines, Tools, Equipment and Work Aids: The essential functions of this position require the use of a telephone,


What City Of Denton employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom