ZipRecruiter

Log In

1

Distributed Control System Operator Jobs in South Carolina

COMPA Industries, Inc.

I&C Design Engineer

Aiken, SC · On-site

$80 - $90/hr

Applicants without hands-on design experience in process control instrumentation, PLCs, Distributed Control Systems (DCS), and MicroStation 2D CADD will not be considered competitive. Candidates must ...

Alpek Polyester USA

Chemical Operator

Gaston, SC

$18.25 - $21/hr

Monitor the process through a Distributed Control System (DCS) and adjust process conditions as ... Monitor operating parameters by reading gauges, instruments, and meters; compare readings to known ...

Alpek Polyester

Chemical Operator Job - Gaston, SC

Gaston, SC · On-site

$18.25 - $21/hr

Monitor the process through a Distributed Control System (DCS) and adjust process conditions as ... Monitor operating parameters by reading gauges, instruments, and meters; compare readings to known ...

next page

Showing results 1-20

All JobsDistributed Control System Operator JobsDistributed Control System Operator Jobs in South Carolina

Distributed Control System Operator information

What are some common challenges faced by Distributed Control System Operators, and how can they be managed?

Distributed Control System Operators often encounter challenges such as responding to system alarms, managing equipment malfunctions, and ensuring continuous, safe plant operations. Rapid decision-making and effective communication with maintenance and engineering teams are crucial to minimize downtime and safety risks. Staying updated with system upgrades and participating in regular training also help operators manage new technologies and evolving procedures. Collaboration and strong attention to detail are key to successfully overcoming these challenges.

What is a Distributed Control System (DCS) Operator?

A Distributed Control System (DCS) Operator is a professional responsible for monitoring, controlling, and optimizing industrial processes using a distributed control system. They ensure that manufacturing plants or industrial facilities run efficiently, safely, and within set parameters by managing process variables such as temperature, pressure, and flow. DCS Operators respond to alarms, troubleshoot issues, and coordinate with other team members to maintain smooth operations. Their role is crucial in industries like oil and gas, power generation, chemical manufacturing, and water treatment.

What is the difference between Distributed Control System Operator vs Control Room Operator?

AspectDistributed Control System OperatorControl Room Operator
CredentialsTechnical certifications in control systems, process operationsBasic operational training, sometimes technical certifications
Work EnvironmentIndustrial plants, manufacturing facilities, energy plantsControl rooms, monitoring stations across various industries
Industry UsagePower plants, oil & gas, manufacturingUtilities, transportation, manufacturing

The Distributed Control System Operator focuses on managing and monitoring complex control systems within industrial environments, often requiring technical certifications. Control Room Operators oversee plant operations from control rooms, ensuring safety and efficiency. While both roles involve monitoring equipment, the DCS Operator specializes in control system management, whereas the Control Room Operator handles overall plant operations.

What are the key skills and qualifications needed to thrive as a Distributed Control System Operator, and why are they important?

To thrive as a Distributed Control System (DCS) Operator, you need a solid understanding of process control, instrumentation, and industrial automation, typically supported by a technical diploma or associate degree in engineering or a related field. Familiarity with DCS platforms such as Honeywell, Siemens, or Emerson, as well as relevant safety certifications and SCADA systems, is usually required. Strong problem-solving abilities, attention to detail, and effective communication skills help operators manage complex systems and respond quickly to issues. These competencies ensure safe, efficient, and reliable plant operations in highly regulated industrial environments.
What are popular job titles related to Distributed Control System Operator jobs in South Carolina? For Distributed Control System Operator jobs in South Carolina, the most frequently searched job titles are:
What job categories do people searching Distributed Control System Operator jobs in South Carolina look for? The top searched job categories for Distributed Control System Operator jobs in South Carolina are:
What cities in South Carolina are hiring for Distributed Control System Operator jobs? Cities in South Carolina with the most Distributed Control System Operator job openings:
Distributed Control System Operator jobs near you
Infographic showing various Distributed Control System Operator job openings in South Carolina as of June 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution.
Control System Engineer - I&C Senior Design Engineer

Control System Engineer - I&C Senior Design Engineer

Delan Associates, Inc.

Greenville, SC • On-site

Contractor

Posted 7 days ago

Job description

NOTE: US Citizenship is required to perform this contract.
Seeking a Control System Engineer - Instrumentation and Controls (I&C) Senior Design Engineer to support our client in Greenville, SC.
Requirements:
The Contractor will provide the essential administrative processes, technical knowledge and leadership as described below. This position has oversight of a specific area and acts as a representative of the engineering discipline ensuring technical accuracy in project execution in all phases. This is a lead position on assigned projects performing engineering assignments of advanced complexity.
  • Under general supervision of the Discipline Lead Engineer, serve as an Area Lead providing guidance / supervision to other engineers and designers
  • Analyze and make independent recommendations regarding technical solutions to problems of advanced complexity in accordance with project requirements
  • Develop and review specifications and design criteria
  • Perform and check engineering analyses and calculations; specify materials, equipment, and systems; and solve technical problems of advanced complexity
  • Coordinate technical issues with other disciplines, project management, vendors, and clients Execute work in compliance with Project Quality Plan and procedures
  • Execute work in accordance with the approved project scope, cost, and schedule baselines
  • Develop and review estimates, schedules, and progress reports including efforthour estimating and staff forecasting
  • Establish, control, and report on material key quantities; provide analysis and forecasts
  • Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations, and review of vendor submittals
  • Provide technical support to activities associated with construction administration including response to construction
  • Other duties as assigned

Specific Job Requirements
  • Perform a broad range of I&C design activities, including design definition, control systems architecture and development, digital systems, Programmable Logic Controller (PLC), Distributed Control Systems (DCS), network configuration, logic development, network switches, process controls, Piping and Instrumentation Diagram (P&ID) development support and review, HMI, communication protocols, routing, and layout, Safety Integrity Level (SIL), and procurement activities
  • Prepare and modify instrument and control systems design documents (e.g., instrument datasheets, Input / Output wiring diagrams, schematics, panel layouts, logic diagrams, cable schedules, and instrument installation details)
  • Perform, check and audit control systems sizing calculations for control valves, relief valves, flow elements, thermowells, and other instrumentation
  • Create instrument index and datasheets, generate reports, and monitor design wiring and loop development activities in Intergraph SmartPlant Instrumentation (SPI) database
  • Develop complex control systems narrative specifications
  • Prepare complex Instrument design and installation requirements
  • Develop complex control systems logic diagrams and/or cause and effect diagrams
  • Represent control systems in model reviews
  • Closely monitor 3D modeling prepared by the design group using review software
  • Develop complex specifications for DCS, PLC, and Safety Instrumented Systems (SIS) hardware and software applications
  • Monitor DCS / PLC / SIS design developed by the design group

Qualifications:
  • Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards
  • Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors
  • Job-related technical knowledge necessary to complete the job
  • Advanced knowledge of discipline codes and standards
  • Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines
  • Ability to attend to detail and work in a time-conscious and time-effective manner
  • Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs
  • Significant experience providing Engineering, Procurement, and Construction (EPC) services on large industrial projects
  • Proficiency executing large EPC projects utilizing engineering analysis, 3D modeling and 2D Computer-Aided Drafting and Design (CADD) automation tools in a multi-discipline environment
  • Bachelor of Science degree in Control Systems Engineering, Electrical Engineering, Chemical Engineering or related engineering field and minimum ten (10) years of work related experience
  • Must be able to complete an I&C Engineer Self-Assessment Form

Preferred:
  • Professional Engineer license
  • Experience with design of systems, structures and components for nuclear facilities under the requirements of American Society of Mechanical Engineers (ASME) NQA-1
  • Advanced knowledge of commercial availability and cost of materials
  • Demonstrated experience managing and leading large projects
  • Proficiency with project set-up, development of control-level schedules, progress reporting and project close-out
  • Practical field experience
  • EPC project experience for the following industries:
    • U.S Department of Energy or other U.S. Federal Government Agency
    • Nuclear facilities under a nuclear quality assurance program
    • Manufacturing, pharmaceutical or biotechnology
  • Proficiency with Bentley MicroStation
  • Proficiency with Autodesk AutoCAD
  • Proficiency with Intergraph SPI
  • Advanced knowledge of:
    • Specifying instrumentation
    • Control systems procurement activities
    • P&ID representation; can recognize / report problems associated with control systems representation on P&ID
    • Developing control strategies and represent on P&ID
    • Loading information such as Input / Output (I/O) assignment, I/O type, alarms and setpoints, into and extract information from Intergraph SPI database
  • Knowledge and experience developing safety requirement specifications for Safety Instrumented Systems
  • Practical experience in Layer of Protection Analysis (LOPA) and Hazard and Operability (HAZOP) reviews and SIL assignment
  • Experience in SIL verification calculations
  • Experience in commissioning and startup of DCS, PLC, and SIS

Apply