ZipRecruiter

Log In

1

Director Kuka Jobs (NOW HIRING)

Tenneco

Controls Technician

Athens, AL · On-site

$29 - $38/hr

Improve programs for robot systems (KUKA, Motoman) * Organizes outside contractors as needed for PM ... Must be able to work independently with minimum of direct supervision or other guidance * Must be ...

Pivot Robotics

Senior Mechanical Engineer

San Francisco, CA · On-site

$123K - $162K/yr

Direct experience with robotic grinding, deburring, or surface finishing. You've shipped or deeply ... and KUKA arms, Zivid vision). * Someone who thrives in the field and on the floor, not only in ...

Vulcan Elements

Controls Engineer

Benson, NC · On-site

$67K - $87K/yr

Own the integration and commissioning of robot cells(Fanuc, ABB, Kuka) - cell layout review, end-of ... direct industrial automation and controls engineering experience. * Strong hands-on experience ...

Vulcan Elements

Controls Engineer

Durham, NC · On-site

$80K - $104K/yr

Own the integration and commissioning of robot cells(Fanuc, ABB, Kuka) - cell layout review, end-of ... direct industrial automation and controls engineering experience. * Strong hands-on experience ...

Whirlpool

Weekend Maintenance

Tulsa, OK · On-site

$36.25/hr

... Kuka) Weekend Shift Hours- Friday, Saturday and Sunday from 5:00am to 5:30pm Hourly pay rate for ... Direct and assist apprentices and other crafts in completing repairs and projects. Provide ...

Relogic Research

Robotics Engineer

Huntsville, AL · On-site

This Robotic Engineer role will be in direct support of ReLogic's efforts to solve priority ... Hands-on experience with robotic arms (Kuka, Fanuc, Universal Robots, or equivalent) * Proficiency ...

Relogic Research

Robotics Engineer

Huntsville, AL · On-site

This Robotic Engineer role will be in direct support of ReLogic's efforts to solve priority ... Hands-on experience with robotic arms (Kuka, Fanuc, Universal Robots, or equivalent) * Proficiency ...

capilla® Schweißmaterialien GmbH

$69 - $104/hr

A varied and self-directed role in a permanent position with broad scope for action awaits you ... KUKA robot programming/handling and path planning as well as basic CAD/CAM knowledge (required ...

ReLogic Research

Robotics Engineer

Huntsville, AL · On-site

This Robotic Engineer role will be in direct support of ReLogic's efforts to solve priority ... Hands-on experience with robotic arms (Kuka, Fanuc, Universal Robots, or equivalent) * Proficiency ...

Formic

Robotics Field Service Technician

Detroit, MI · On-site

... directed tasks with minimal oversight Bonus points if you have: * Experience working hands-on with 6-axis robot brands such as Fanuc, KUKA, Yaskawa, ABB, or Universal Robots (e.g. maintenance ...

New

previous pagenext page

Showing results 21-40

All JobsBusiness JobsDirector Kuka Jobs

Director Kuka information

What is the difference between Director Kuka vs Kuka Robot Programmer?

AspectDirector KukaKuka Robot Programmer
Required CredentialsBachelor's degree in engineering or related field; management experienceTechnical diploma or certification in robotics or automation; programming skills
Work EnvironmentOffice setting, overseeing projects and teamsManufacturing or industrial setting, hands-on programming and setup
Industry UsageUsed in industries for strategic oversight and project managementUsed in manufacturing plants for robot programming and operation

The main difference between a Director Kuka and a Kuka Robot Programmer lies in their roles and responsibilities. The Director Kuka focuses on strategic management, overseeing projects, and team leadership, often requiring management credentials. In contrast, the Kuka Robot Programmer specializes in technical tasks like programming and maintaining Kuka robots on the shop floor. Both roles are essential in automation but serve different functions within the industry.

What cities are hiring for Director Kuka jobs?

Cities with the most Director Kuka job openings:

What are the most commonly searched types of Kuka jobs?

The most popular types of Kuka jobs are:

What states have the most Director Kuka jobs?

States with the most job openings for Director Kuka jobs include:

Director Kuka jobs near you

Controls Technician

Tenneco

Athens, AL • On-site

$29 - $38/hr

Full-time

Posted 25 days ago

Tenneco rating

7.1

Company rating: 7.1 out of 10

Based on 90 frontline employees who took The Breakroom Quiz

343rd of 499 rated machine equipment manufacturers

Job description

General Function:
The Controls Technician is to work under the Controls Engineer to train, complete improvement projects, and lead improvement projects. The Controls Tech essential duties are listed below. This position will be backup for the Controls Engineer position. Typical duties will include but not limited to the following:
Essential Duties and Responsibilities include the following. Other duties may be assigned.
  1. Review, repair, and redesign legacy code as required and approved by controls engineer to update obsolete equipment
  2. Make and properly document PLC programming changes necessary for machine upgrades or process changes by engineering
  3. Learn other PLC programming such as Siemen's steps 5 & 7, Omron, and Mitsubishi
  4. Troubleshoot and update/replace motion control systems (IAI, Allen Bradley, SEW, Emerson, etc.)
  5. Create and update electrical and programming prints/documentation in AutoCAD
  6. Setup communications between PLC's and other needed automation (camera's, marking systems, safety devices, etc.)
  7. Configuring and designing HMI systems
  8. Troubleshooting vision systems (Cognex, Keyence)
  9. Checking/updating equipment for compliance with industry standards UL and CE
  10. Improve programs for robot systems (KUKA, Motoman)
  11. Organizes outside contractors as needed for PM or other service work
  12. Work with outside vendors to identify and source parts needed for various projects
  13. Troubleshooting control system issues, and industrial communication protocols (Ethernet/IP, RS-232/485, Modbus, Profibus, etc.)
  14. Write procedures for the maintenance personnel
  15. Proficient in Microsoft Office
  16. Teach classes to maintenance techs on controls troubleshooting/upgrading
  17. Teach classes to maintenance techs on PLC programming
  18. Certified in Arc Flash safety
  19. Follow lockout tag out procedures and give electrical safety training to others
  20. Desired Skill - familiar with SQL databases, servers, or computer programming languages
  21. Backup for the Controls Engineer

Qualification Requirements:
  1. Proficient in the use of computers - required
  2. Use of Microsoft Word, Excel - required
  3. Use of Microsoft Outlook - preferred
  4. Use of a CMMS system - preferred
  5. Proficient at troubleshooting vision systems - preferred
  6. Experience with laser systems (marking or welding) - preferred
  7. Proficient at Allen Bradley PLC programming - required (Siemens preferred but not required)
  8. Experience with teaching/programming KUKA or Motoman robots - required
  9. Familiarity with SQL and databases or computer programming - preferred
  10. Familiarity with troubleshooting motion control systems - required
  11. 5+ years experience as Maintenance Mechanic - preferred

Education and/or Experience:
  1. High school diploma or equivalent
  2. Technical/Vocational Training Certificate in Welding, Electrical, Hydraulics & Mechanical preferred
  3. 10+ years experience as Maintenance Mechanic preferred

Reasoning Ability:
  1. Ability to read and understand electrical, hydraulic, pneumatic and basic mechanical drawings
  2. Ability to read and understand equipment manuals
  3. Ability to read and understand reports, purchase orders, bill of ladings, shipment tracking documents and other CMMS related documentation
  4. Ability to identify changes needed to improve reliability of a controls system or PLC programming of automation

Other Skills and Abilities:
  1. Must be able to perform job functions in parallel. (Multi-tasking)
  2. Must be able to work independently with minimum of direct supervision or other guidance
  3. Must be able to report up to plant management in professional manner
  4. Must be able to teach/train technicians in an effective manner

Physical Demands:
The physical demands described here are representative of those an employee encounters while performing the essential functions of this job. While performing this job the employee will be:
  1. Sitting at Computer, Standing, Walking, Bending, Lifting and using Stairs to issue items to employees
  2. Standing, Walking, Bending, Lifting and using Stairs to place replacement stock in Supply Crib
  3. Maximum lifting will be 40 pounds
  4. All Work will be on concrete floor

Work Environment:
  1. Will be required to wear hearing protection, eye protection and safety shoes
  2. The facility is not temperature controlled.
  3. Daily work involves working with manufacturing related chemicals, electrical components, robotics, automated equipment, hydraulic systems, pneumatic systems, and various other hazards

What Tenneco employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply