ZipRecruiter

Log In

1

Cwi Quality Control Inspector Jobs in Berwick, PA

Nucor

QC Inspector

Hazleton, PA

The 1st and 2nd shift QC Inspector's principal duties include but are not limited to: Verify and ... Ability to achieve VT Level II or CWI certification * Experience in Level II in UT Shearwave and VT ...

Nucor

QC Inspector

West Hazleton, PA · On-site

The 1st and 2nd shift QC Inspector's principal duties include but are not limited to: Verify and ... Ability to achieve VT Level II or CWI certification * Experience in Level II in UT Shearwave and VT ...

Heidelbergmaterials

QC Apprentice I

Milton, PA · On-site

$20/hr

... Inspector certification within two years of commencing employment What Are We Looking For Strong interest in materials testing and construction quality control Demonstrated ability to follow ...

Heidelberg Materials

QC Apprentice I

Milton, PA · On-site

$20/hr

... C Inspector certification within two years of commencing employment What Are We Looking For • Strong interest in materials testing and construction quality control • Demonstrated ability to ...

ID Logistics

Quality Control - CoPack

Hanover, PA · On-site

$19.50/hr

Quality Control will maintain quality standards by approving incoming materials, in-process ... inspection or system analysis. • Perform picking duties in an efficient manner that meets ...

Cardinal Glass

Quality Control Tech

Mountain Top, PA

$17 - $22/hr

Perform Material and Product inspections. * Perform Production area audits as needed to help ... control behavior and process throughout the facility. * Maintain a clean and orderly work area at ...

next page

Showing results 1-20

All JobsCwi Quality Control Inspector JobsCwi Quality Control Inspector Jobs in Berwick, PA

Cwi Quality Control Inspector information

See Berwick, PA salary details

$11

$20

$32

How much do cwi quality control inspector jobs pay per hour?

As of Aug 17, 2026, the average hourly pay for cwi quality control inspector in Berwick, PA is $20.63, according to ZipRecruiter salary data. Most workers in this role earn between $16.63 and $23.08 per hour, depending on experience, location, and employer.

What is a CWI Quality Control Inspector?

CWI Quality Control Inspectors are certified professionals responsible for ensuring that welding work meets specific codes and quality standards. 'CWI' stands for Certified Welding Inspector, which is a credential awarded by the American Welding Society (AWS). These inspectors examine welds, review documentation, and verify that processes comply with industry regulations. Their expertise helps maintain safety, reliability, and compliance in various industries such as construction, manufacturing, and pipelines.

What are the key skills and qualifications needed to thrive as a CWI Quality Control Inspector, and why are they important?

To excel as a CWI Quality Control Inspector, you need a solid understanding of welding processes, codes, and standards, typically backed by AWS Certified Welding Inspector (CWI) certification. Familiarity with inspection tools, nondestructive testing (NDT) methods, and quality management systems is crucial. Attention to detail, strong analytical skills, and effective communication set outstanding inspectors apart. These competencies ensure welding projects meet safety and quality requirements, reducing the risk of costly errors and maintaining regulatory compliance.

What are some common challenges faced by a CWI Quality Control Inspector, and how can they be managed on the job?

CWI Quality Control Inspectors often encounter challenges such as interpreting complex welding codes, managing tight project deadlines, and maintaining clear communication between different stakeholders (welders, engineers, project managers). Staying organized and continually updating one's knowledge of industry standards like AWS codes can help address technical challenges. Developing strong interpersonal skills also aids in effectively resolving disputes or misunderstandings that can arise during inspections. Adhering to strict documentation and reporting processes further ensures compliance and project quality.

What is the difference between Cwi Quality Control Inspector vs NDT Technician?

AspectCwi Quality Control InspectorNDT Technician
CertificationsCertified Welding Inspector (CWI)Various NDT certifications (e.g., ASNT Level II/III)
Work EnvironmentConstruction, manufacturing, oil & gas sitesIndustrial facilities, pipelines, manufacturing plants
Primary ResponsibilitiesInspecting welds, ensuring compliance with codesPerforming non-destructive testing methods

While both roles focus on quality and safety in industrial settings, the Cwi Quality Control Inspector primarily inspects welds for compliance using visual and code standards, whereas the NDT Technician specializes in non-destructive testing techniques to detect flaws. Certifications and work environments overlap, but their core duties differ in scope and methods.

How do you become a CWI Quality Control Inspector?

To become a Certified Welding Inspector (CWI), candidates typically need a combination of welding experience, such as 3-5 years in the field, and must pass the AWS CWI certification exam. Additional requirements often include completing a training course and maintaining ongoing certification through continuing education and recertification every three years.

How much can you make if you have a Cwi Quality Control Inspector?

A CWI (Certified Welding Inspector) quality control inspector typically earns between $60,000 and $90,000 annually, depending on experience, certifications, and industry. Salaries can vary based on location, employer, and the complexity of inspections performed.

Is Cwi Quality Control Inspector inspection a good career?

A Cwi Quality Control Inspector role involves inspecting welds and ensuring compliance with industry standards, often requiring certification and attention to detail. It can offer stable employment with opportunities for advancement in manufacturing, construction, or fabrication industries. The career typically involves working in industrial environments and may require physical stamina and knowledge of inspection tools and procedures.

What cities near Berwick, PA are hiring for Cwi Quality Control Inspector jobs?

Cities near Berwick, PA with the most Cwi Quality Control Inspector job openings:

Cwi Quality Control Inspector jobs near you
Infographic showing various Cwi Quality Control Inspector job openings in Berwick, PA as of August 2026, with employment types broken down into 1% As Needed, 80% Full Time, 14% Part Time, 4% Contract, and 1% Nights. Highlights an 88% Physical, 2% Hybrid, and 10% Remote job distribution, with an average salary of $42,917 per year, or $20.6 per hour.

QC Inspector

Nucor

Hazleton, PA

Other

Re-posted yesterday

Nucor rating

7.7

Company rating: 7.7 out of 10

Based on 139 frontline employees who took The Breakroom Quiz

199th of 540 rated manufacturers

Job description

Job Details

Division: Nucor Towers & Structures Inc

Location: West_Hazleton, PA, United States  

Other Available Locations: N/A

Expand Beyond with Nucor

Nucor Towers and Structures (NTS) is a new entity within Nucor, the largest recycler and largest manufacturer of steel and steel products in North America, focused on the execution of our strategy to "Expand Beyond" our core business. As a part of Nucor's New Markets product group, NTS is focused on the exciting growth potential in the power distribution market. Current production facility is in West Hazleton, PA, with plans to build a national footprint.

For a brief video about NTS, please visit the following link: NTS Update Video

Why Nucor?

With a firm commitment to our teammates, strong benefits and performance incentives, it's easy to see why Nucor is named one of America's best employers and ranked as the #1 employer in its industry by Fortune Magazine. For more information on our benefits go to Nucor.com/benefits.

We work together to create a safe, positive, and engaging environment. While delivering the highest quality products and service for our customers, we lead the steel industry in environmental responsibility. Joining our team means working with people who have your back and are invested in helping you build a strong future. You will never stop learning at Nucor - and when you are ready to take the next step in your career, we're ready, too.

Basic Job Functions:

The 1st and 2nd shift QC Inspector's principal duties include but are not limited to: Verify and document that finished product has been manufactured in such a manner that meets the requirements of the customer specifications and AWS D1.1.  The Inspector performs dimensional layout and visual weld inspections of all welds per the quality inspection procedures.  Inspections are to be documented on the appropriate inspection forms.

 Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.

Minimum Qualifications:
  1. Experience in blueprint reading and layout.  
  2. Ability to achieve VT Level II or CWI certification
  3. Experience in Level II in UT Shearwave and VT Level II
Preferred Qualifications:
  • Knowledge and experience with the manufacture of steel transmission/distribution monopole structures.
  • Knowledge and experience with weld inspection to the requirements of AWS D1.1 
  • Goal oriented with a drive for continuous improvement.

Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

What Nucor employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Nucor logo

About Nucor

Sourced by ZipRecruiter

Nucor Corporation is an American producer of steel and related products based in Charlotte, North Carolina. It is the largest steel producer in the United States, the largest "mini-mill" steelmaker (i.e. it uses electric arc furnaces to melt scrap steel as opposed to blast furnaces to melt iron), and the biggest recycler of scrap in North America. As of 2021, Nucor was the 15th-largest steel producer in the world.

Industry

Primary metal manufacturing

Company size

10,000+ Employees

Headquarters location

Charlotte, NC, US

Year founded

1905

Social media

FacebookTwitter

View All Nucor Jobs

Apply