Princeton, IL · On-site
$15.75 - $20.25/hr
The Production Machine Operator will operate various machines such as the lathe, punch press, saw/shear, press brake, and others, as required, to print specifications within tolerances allowed for ...
Quick apply
Princeton, IL · On-site
$15.75 - $20.25/hr
The Production Machine Operator will operate various machines such as the lathe, punch press, saw/shear, press brake, and others, as required, to print specifications within tolerances allowed for ...
Monroe, NC · On-site
$14.75 - $18.50/hr
Operate crane and fork lift truck to load and secure material on cut off beds and set for proper cut length. Operate as necessary to cut off prescribed sections according to procedures. Mark and ...
Monroe, NC · On-site
$14.75 - $18.50/hr
Operate crane and fork lift truck to load and secure material on cut off beds and set for proper cut length. Operate as necessary to cut off prescribed sections according to procedures. Mark and ...
Monroe, NC · On-site
$14.75 - $18.50/hr
Operate crane and fork lift truck to load and secure material on cut off beds and set for proper cut length. Operate as necessary to cut off prescribed sections according to procedures. Mark and ...
Monroe, NC · On-site
$14.75 - $18.50/hr
Operate crane and fork lift truck to load and secure material on cut off beds and set for proper cut length. Operate as necessary to cut off prescribed sections according to procedures. Mark and ...
Tanner, AL · On-site
$16 - $19/hr
Responsible for the accurate cut length, deflection, heat and ingot ID are applied on each piece of ... Operator Lead (MOL) in developing new methods and techniques to improve process and quality of ...
Tanner, AL · On-site
$16 - $19/hr
Responsible for the accurate cut length, deflection, heat and ingot ID are applied on each piece of ... Operator Lead (MOL) in developing new methods and techniques to improve process and quality of ...
Tanner, AL · On-site
$16 - $19/hr
Responsible for the accurate cut length, deflection, heat and ingot ID are applied on each piece of ... Operator Lead (MOL) in developing new methods and techniques to improve process and quality of ...
Tanner, AL · On-site
$16 - $19/hr
Responsible for the accurate cut length, deflection, heat and ingot ID are applied on each piece of ... Operator Lead (MOL) in developing new methods and techniques to improve process and quality of ...
Decatur, AL · On-site
$14.25 - $18/hr
WOLVERINE INDUSTRIES POSITION DESCRIPTION B&O SAW OPERATOR We are currently seeking reliable, hard ... defects and cut length checks * Pack cut material to the requirements for the work order.
Quick apply
Decatur, AL · On-site
$14.25 - $18/hr
WOLVERINE INDUSTRIES POSITION DESCRIPTION B&O SAW OPERATOR We are currently seeking reliable, hard ... defects and cut length checks * Pack cut material to the requirements for the work order.
Monroe, NC · On-site
$14.75 - $18.50/hr
Operate crane and fork lift truck to load and secure material on cut off beds and set for proper cut length. Operate as necessary to cut off prescribed sections according to procedures. Mark and ...
Monroe, NC · On-site
$14.75 - $18.50/hr
Operate crane and fork lift truck to load and secure material on cut off beds and set for proper cut length. Operate as necessary to cut off prescribed sections according to procedures. Mark and ...
Wellsville, PA · On-site
$16.25 - $19.50/hr
The Saw Operator cuts extrusions to cut length and tolerances per EPICS, Pennex Drawings, and customer requirements. Inspects length and angularity of cut pieces per work instructions.
Wellsville, PA · On-site
$16.25 - $19.50/hr
The Saw Operator cuts extrusions to cut length and tolerances per EPICS, Pennex Drawings, and customer requirements. Inspects length and angularity of cut pieces per work instructions.
Decatur, AL · On-site
$15.25 - $18/hr
WOLVERINE INDUSTRIES POSITION DESCRIPTION B&O SAW OPERATOR We are currently seeking reliable, hard ... cut length checks • Pack cut material to the requirements for the work order. • Communicate ...
Decatur, AL · On-site
$15.25 - $18/hr
WOLVERINE INDUSTRIES POSITION DESCRIPTION B&O SAW OPERATOR We are currently seeking reliable, hard ... cut length checks • Pack cut material to the requirements for the work order. • Communicate ...
Tanner, AL · On-site
$16 - $19/hr
Responsible for the accurate cut length, deflection, heat and ingot ID are applied on each piece of ... Operator Lead (MOL) in developing new methods and techniques to improve process and quality of ...
Tanner, AL · On-site
$16 - $19/hr
Responsible for the accurate cut length, deflection, heat and ingot ID are applied on each piece of ... Operator Lead (MOL) in developing new methods and techniques to improve process and quality of ...
Charlotte, NC · On-site
$16.50 - $19.75/hr
Machine Operator Be part of building something extraordinary HSP US: Building the Future of Energy ... Configure and optimize machine parameters such as speed, tension, width, alignment, and cut length.
Charlotte, NC · On-site
$16.50 - $19.75/hr
Machine Operator Be part of building something extraordinary HSP US: Building the Future of Energy ... Configure and optimize machine parameters such as speed, tension, width, alignment, and cut length.
Kewanee, IL · On-site
$14.75 - $19/hr
The Production Machine Operator will operate various machines such as the lathe, punch press, saw/shear, press brake, and others, as required, to print specifications within tolerances allowed for ...
Quick apply
Kewanee, IL · On-site
$14.75 - $19/hr
The Production Machine Operator will operate various machines such as the lathe, punch press, saw/shear, press brake, and others, as required, to print specifications within tolerances allowed for ...
Decatur, AL · On-site
$14.25 - $18/hr
WOLVERINE INDUSTRIES POSITION DESCRIPTION B&O SAW OPERATOR We are currently seeking reliable, hard ... for defects and cut length checks Pack cut material to the requirements for the work order.
Decatur, AL · On-site
$14.25 - $18/hr
WOLVERINE INDUSTRIES POSITION DESCRIPTION B&O SAW OPERATOR We are currently seeking reliable, hard ... for defects and cut length checks Pack cut material to the requirements for the work order.
Kewanee, IL · On-site
$14.75 - $19/hr
The Production Machine Operator will operate various machines such as the lathe, punch press, saw/shear, press brake, and others, as required, to print specifications within tolerances allowed for ...
Kewanee, IL · On-site
$14.75 - $19/hr
The Production Machine Operator will operate various machines such as the lathe, punch press, saw/shear, press brake, and others, as required, to print specifications within tolerances allowed for ...
Wellsville, PA · On-site
$16.25 - $19.50/hr
The Saw Operator cuts extrusions to cut length and tolerances per EPICS, Pennex Drawings, and customer requirements. Inspects length and angularity of cut pieces per work instructions.
Wellsville, PA · On-site
$16.25 - $19.50/hr
The Saw Operator cuts extrusions to cut length and tolerances per EPICS, Pennex Drawings, and customer requirements. Inspects length and angularity of cut pieces per work instructions.
Decatur, AL · On-site
$14.25 - $18/hr
WOLVERINE INDUSTRIES POSITION DESCRIPTION B&O SAW OPERATOR We are currently seeking reliable, hard ... for defects and cut length checks Pack cut material to the requirements for the work order.
Decatur, AL · On-site
$14.25 - $18/hr
WOLVERINE INDUSTRIES POSITION DESCRIPTION B&O SAW OPERATOR We are currently seeking reliable, hard ... for defects and cut length checks Pack cut material to the requirements for the work order.
Decatur, AL · On-site
$14.25 - $18/hr
WOLVERINE INDUSTRIES POSITION DESCRIPTION B&O SAW OPERATOR We are currently seeking reliable, hard ... Visual inspection of material for defects and cut length checks * Pack cut material to the ...
Quick apply
Decatur, AL · On-site
$14.25 - $18/hr
WOLVERINE INDUSTRIES POSITION DESCRIPTION B&O SAW OPERATOR We are currently seeking reliable, hard ... Visual inspection of material for defects and cut length checks * Pack cut material to the ...
Decatur, AL · On-site
$14.25 - $18/hr
WOLVERINE INDUSTRIES POSITION DESCRIPTION B&O SAW OPERATOR We are currently seeking reliable, hard ... cut length checks • Pack cut material to the requirements for the work order. • Communicate ...
Decatur, AL · On-site
$14.25 - $18/hr
WOLVERINE INDUSTRIES POSITION DESCRIPTION B&O SAW OPERATOR We are currently seeking reliable, hard ... cut length checks • Pack cut material to the requirements for the work order. • Communicate ...
Tanner, AL · On-site
$16 - $19/hr
Responsible for the accurate cut length, deflection, heat and ingot ID are applied on each piece of ... Operator Lead (MOL) in developing new methods and techniques to improve process and quality of ...
Tanner, AL · On-site
$16 - $19/hr
Responsible for the accurate cut length, deflection, heat and ingot ID are applied on each piece of ... Operator Lead (MOL) in developing new methods and techniques to improve process and quality of ...
Winder, GA · On-site
$15 - $18.25/hr
Sets up and operates automatic leveling, sheeting, console-operated equipment to level length and stack weigh flat sheets of various gauges of material to customer requirements. Work from customer ...
Winder, GA · On-site
$15 - $18.25/hr
Sets up and operates automatic leveling, sheeting, console-operated equipment to level length and stack weigh flat sheets of various gauges of material to customer requirements. Work from customer ...
Cities with the most Cut Length Operator job openings:
States with the most job openings for Cut Length Operator jobs include:
For Cut Length Operator jobs, the most frequently searched job titles are:
Princeton, IL • On-site
$15.75 - $20.25/hr
Full-time
Medical, Dental, Vision, Life, Retirement, PTO
Posted 10 days ago
Celebrating our 82nd year, Martin Engineering is a privately owned global manufacturing company located in Neponset, IL. A worldwide leader in the Bulk Materials Handling Industry, we believe it is our people who are responsible for our SUCCESS. Our culture is unique; we want our employees to arrive to work happy and leave for the day feeling that same way. We are united; we know we are better together. We strive to deliver superior service to all of our customers, both internal and external. If you share our values, please continue reading to find out what we are looking for in a Production Machine Operator at our Neponset, IL facility.
Job Summary:
The Production Machine Operator will operate various machines such as the lathe, punch press, saw/shear, press brake, and others, as required, to print specifications within tolerances allowed for producing quality parts. This role inspects parts with precision measuring tools to ensure the parts are within ISO 9001 specifications and standards.
Responsibilities & Duties:
Qualifications:
High school diploma or equivalent.
One or more years experience with machines or machine drawing.
Experience with blueprint reading and precision instruments.
Benefits & Perks:
If our culture hasn't convinced you that Martin Engineering is the place you want to be, check out a few of our benefits!
To learn more about who we are, check us out at www.martin-eng.com
Powered by JazzHR
FNh85WWrqq
