1

Controls Engineer Jobs in Lubbock, TX (NOW HIRING)

... Engineering News-Record [ENR]: #1 in Power, #16 Top 50 Domestic Heavy Contractors, #13 Transportation Contractor). POSITION SUMMARY: The Lead Instrumentation and Controls (I&C) Startup Technician is ...

New

... Engineering News-Record [ENR]: #1 in Power, #16 Top 50 Domestic Heavy Contractors, #13 Transportation Contractor). POSITION SUMMARY: The Lead Instrumentation and Controls (I&C) Startup Technician is ...

New

... Engineering News-Record [ENR]: #1 in Power, #16 Top 50 Domestic Heavy Contractors, #13 Transportation Contractor). POSITION SUMMARY: The Lead Instrumentation and Controls (I&C) Startup Technician is ...

... Engineering News-Record [ENR]: #1 in Power, #16 Top 50 Domestic Heavy Contractors, #13 Transportation Contractor). POSITION SUMMARY: The Lead Instrumentation and Controls (I&C) Startup Technician is ...

... Engineering News-Record [ENR]: #1 in Power, #16 Top 50 Domestic Heavy Contractors, #13 Transportation Contractor). POSITION SUMMARY: The Lead Instrumentation and Controls (I&C) Startup Technician is ...

New

... Engineering News-Record [ENR]: #1 in Power, #16 Top 50 Domestic Heavy Contractors, #13 Transportation Contractor). POSITION SUMMARY: The Lead Instrumentation and Controls (I&C) Startup Technician is ...

New

... Engineering News-Record [ENR]: #1 in Power, #16 Top 50 Domestic Heavy Contractors, #13 Transportation Contractor). POSITION SUMMARY: The Lead Instrumentation and Controls (I&C) Startup Technician is ...

New

... Engineering News-Record [ENR]: #1 in Power, #16 Top 50 Domestic Heavy Contractors, #13 Transportation Contractor). POSITION SUMMARY: The Lead Instrumentation and Controls (I&C) Startup Technician is ...

New

... Engineering News-Record [ENR]: #1 in Power, #16 Top 50 Domestic Heavy Contractors, #13 Transportation Contractor). POSITION SUMMARY: The Lead Instrumentation and Controls (I&C) Startup Technician is ...

New

... Engineering News-Record [ENR]: #1 in Power, #16 Top 50 Domestic Heavy Contractors, #13 Transportation Contractor). POSITION SUMMARY: The Lead Instrumentation and Controls (I&C) Startup Technician is ...

New

Fire Alarm Inspector

Lubbock, TX · On-site

$17 - $24/hr

About us Johnson Controls, a global leader in thermal management, mission-critical building systems ... Make minor repairs and programming changes to systems being inspected. * Must adhere to company ...

Fire Alarm Inspector

Lubbock, TX · On-site

$17 - $24/hr

About us Johnson Controls, a global leader in thermal management, mission-critical building systems ... Make minor repairs and programming changes to systems being inspected. * Must adhere to company ...

Showing results 21-40

Controls Engineer information

See Lubbock, TX salary details

$47.2K

$82.9K

$112.5K

How much do controls engineer jobs pay per year?

As of Aug 9, 2026, the average yearly pay for controls engineer in Lubbock, TX is $82,932.00, according to ZipRecruiter salary data. Most workers in this role earn between $71,700.00 and $92,700.00 per year, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as a controls engineer, and why are they important?

To thrive as a Controls Engineer, you need a solid background in electrical engineering, automation, and process control, typically supported by a relevant engineering degree. Familiarity with PLC programming, SCADA systems, HMI software, and certifications such as Professional Engineer (PE) or Siemens/Rockwell training are commonly required. Strong problem-solving abilities, attention to detail, and effective communication skills help distinguish top performers in this field. These skills ensure the safe, efficient, and reliable operation of automated systems critical to industrial and manufacturing environments.

What does a controls engineer do?

A Controls Engineer designs, develops, and maintains systems that control machinery and processes in industries such as manufacturing, automotive, and energy. They work with automation systems, including programmable logic controllers (PLCs), sensors, actuators, and human-machine interfaces (HMIs) to ensure efficient, safe, and reliable operation. Controls Engineers also troubleshoot and optimize existing systems, implement upgrades, and ensure compliance with safety standards. Their expertise is crucial for improving productivity, reducing downtime, and integrating new technologies into production environments.

What is the difference between Controls Engineer vs Electrical Engineer?

AspectControls EngineerElectrical Engineer
Required CredentialsBachelor's in Electrical, Mechanical, or Controls Engineering; certifications like Certified Control Systems Technician (CCST)Bachelor's in Electrical Engineering; Professional Engineer (PE) license often preferred
Work EnvironmentManufacturing plants, automation facilities, industrial settingsDesign offices, research labs, power plants, industrial sites
Industry UsageAutomation, manufacturing, process controlPower generation, electronics, telecommunications, industrial systems
Common Search/ComparisonControls Engineer vs Electrical Engineer

Controls Engineers focus on designing, developing, and maintaining control systems for automation and manufacturing processes, often working closely with machinery and PLCs. Electrical Engineers have a broader scope, working on electrical systems, power distribution, and electronic devices. While both roles require electrical knowledge and certifications, Controls Engineers specialize more in automation and control systems, whereas Electrical Engineers may work across various electrical disciplines.

What are common challenges faced by controls engineers when working on multidisciplinary project teams?

Controls Engineers frequently collaborate with mechanical, electrical, and software engineers, which can present challenges in aligning design standards, timelines, and communication styles. They must ensure that control systems integrate seamlessly with hardware and software components while also meeting safety and regulatory requirements. Effective communication and adaptability are essential, as Controls Engineers often act as a bridge between technical disciplines to troubleshoot issues and implement solutions efficiently.
What are the most commonly searched types of Controls Engineer jobs in Lubbock, TX? The most popular types of Controls Engineer jobs in Lubbock, TX are:
What job categories do people searching Controls Engineer jobs in Lubbock, TX look for? The top searched job categories for Controls Engineer jobs in Lubbock, TX are:
What cities near Lubbock, TX are hiring for Controls Engineer jobs? Cities near Lubbock, TX with the most Controls Engineer job openings:
Infographic showing various Controls Engineer job openings in Lubbock, TX as of July 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $82,932 per year, or $39.9 per hour.

I&C Lead Commissioning & S/U

MasTec Inc

Abernathy, TX

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 3 days ago

New


MasTec rating

7.4

Company rating: 7.4 out of 10

Based on 154 frontline employees who took The Breakroom Quiz

35th of 80 rated construction


Job description

Overview

Company Overview

The Name operating group/Company Name is part of the MasTec Clean Energy & Infrastructure (CE&I) business segment. The CE&I segment generates over $4.5 billion in annual revenue, providing construction services across our renewables, industrial, infrastructure, and general building operating groups. Sustainability and safety are foundational to our culture and influence everything we do.

MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Join one of the largest construction firms in the country (Engineering News-Record [ENR]: #1 in Power, #16 Top 50 Domestic Heavy Contractors, #13 Transportation Contractor). 

 

POSITION SUMMARY:

The Lead Instrumentation and Controls (I&C) Startup Technician is the responsible lead for systems controls functionality of all equipment and controls. The Technician is the primary point of contact for all system I&C function commissioning, checkout and start up through the operation of the equipment / plant.


Responsibilities

ESSENTIAL JOB FUNCTIONS:

  • Assist in the development of startup packages as required. Track and control all documentation required for proper maintenance of the startup packages.
  • Assist in the development of procedures as required to satisfy the EPC Agreement and/or coordinate the startup effort.
  • Assist in the advanced planning and preparation for startup activities and major milestones.
  • Understanding, knowledge and competency of basic use of electrical and instrument equipment and instruments required for checkout, calibration and commissioning.
  • Understanding and competency of basic equipment and instrument calibration.
  • Support DCS loop and logic testing.
  • Support from an I&C standpoint, the initial run of equipment and systems.
  • Review process control equipment and installation.
  • Review field device calibration data.
  • In conjunction with the Construction Foreman, coordinate I&C Technician activities.
  • Perform field engineering changes.
  • Track, record and report progress on assigned systems.
  • Record “as-built” engineering changes on drawings.
  • Maintain plant turnover documentation.
  • Support plant operation.
  • Take personal responsibility for safety and environmental compliance, demonstrate leadership in safety at the Project Site, and show commitment to an Incident-Free workplace through Employee’s own actions as well as by coaching and mentoring others.

Qualifications

EDUCATION AND WORK EXPERIENCE REQUIREMENTS:

  • Minimum of ten (10) years of site commissioning and start up experience with progressive responsibility on Projects for industries such as Power Generation, Chemical Processing, Petrochemical, or similar.
  • Prefer working knowledge of startup testing techniques in electrical disciplines.
  • Previous experience as a Start-up Electrical Technician or similar position preferred.
  • Experience in both new project and revamp work preferred.

KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED:

  • Be knowledgeable of MIC Health and Safety programs and project specific regulations.
  • When on-site, actively participate in daily toolbox meetings with crews and subcontractors.
  • Set a personal example of safe behavior.
  • Other may duties may be assigned
  • Working ability with Microsoft Office required.
  • Ability to read, analyze and interpret drawings, technical procedures, Subcontracts and contracts.
  • Ability to write reports, prepare written correspondence concerning Project needs and issues, and to document project activities.
  • Effectively communicate with Start-up Managers, Engineers, Subcontractors, and site Start-up staff.
  • Solve practical problems based on experience and Project technical requirements.
  • Interpret instructions furnished in written, oral, diagram or schedule form.
  • Must be able to navigate obstacles while walking at construction sites, climb ladders and stairs, occasionally lift objects weighing up to 35 pounds, hear horns and warning alerts, and visually inspect installed work.
  • Willingness and ability to be assigned to Project Sites 100% of the time from mobilization until Project completion with potential travel to Company, Engineering, or Supplier facilities for brief periods. May be temporarily assigned to a Company office location.

PHYSICAL DEMANDS:

  • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions.
  • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks.
  • Stamina to perform this task repetitively and continuously for several hour intervals.
  • Uncontrolled environmental conditions: Constant change in weather and site conditions.
  • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises.
  • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.).
  • Move in and around confined, cluttered, and uneven areas.
  • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights.
  • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings.
  • Visualize objects in three dimensions from drawings.
  • Keep good balance and work at heights.
  • See well (either naturally or with correction).
  • Hear well (either naturally or with correction.)
  • Coordinate the use of eyes, hands, and feet.

HOURS:

This position is a Full-Time position scheduled to work typically 50 hours per week.  Schedule is subject to projects requirements.

TRAVEL:

Travel required up to 90%.  Position requires presence directly on the Project Site location with intermittent travel to residence of record.

 

What's in it for You

Financial Wellbeing

  • Compensation $155,000-$175,000 / year, commensurate with experience

  • Competitive pay with ongoing performance review and merit increase

  • 401(k) with company match & Employee Stock Purchase Plan (ESPP)

  • Flexible spending account (Healthcare & Dependent care)

Health & Wellness

  • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children

  • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance, Weight Management Drug Discount

  • Discounted National Gym Membership Network

Family & Lifestyle

  • Paid Time Off, Paid Holidays, Bereavement Leave

  • Military Leave, including Benefits Continuation

  • Employee Assistance Program

Planning for the Unexpected

  • Short and long-term disability, life insurance, and accidental death & dismemberment

  • Voluntary life insurance, accident, critical illness, hospital indemnity coverage

  • Emergency Travel Assistance Program

  • Group legal plan

Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. 

MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions.

Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at https://reportfraud.ftc.gov/.

MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-RM1

Qualifications:

EDUCATION AND WORK EXPERIENCE REQUIREMENTS:

  • Minimum of ten (10) years of site commissioning and start up experience with progressive responsibility on Projects for industries such as Power Generation, Chemical Processing, Petrochemical, or similar.
  • Prefer working knowledge of startup testing techniques in electrical disciplines.
  • Previous experience as a Start-up Electrical Technician or similar position preferred.
  • Experience in both new project and revamp work preferred.

KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED:

  • Be knowledgeable of MIC Health and Safety programs and project specific regulations.
  • When on-site, actively participate in daily toolbox meetings with crews and subcontractors.
  • Set a personal example of safe behavior.
  • Other may duties may be assigned
  • Working ability with Microsoft Office required.
  • Ability to read, analyze and interpret drawings, technical procedures, Subcontracts and contracts.
  • Ability to write reports, prepare written correspondence concerning Project needs and issues, and to document project activities.
  • Effectively communicate with Start-up Managers, Engineers, Subcontractors, and site Start-up staff.
  • Solve practical problems based on experience and Project technical requirements.
  • Interpret instructions furnished in written, oral, diagram or schedule form.
  • Must be able to navigate obstacles while walking at construction sites, climb ladders and stairs, occasionally lift objects weighing up to 35 pounds, hear horns and warning alerts, and visually inspect installed work.
  • Willingness and ability to be assigned to Project Sites 100% of the time from mobilization until Project completion with potential travel to Company, Engineering, or Supplier facilities for brief periods. May be temporarily assigned to a Company office location.

PHYSICAL DEMANDS:

  • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions.
  • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks.
  • Stamina to perform this task repetitively and continuously for several hour intervals.
  • Uncontrolled environmental conditions: Constant change in weather and site conditions.
  • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises.
  • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.).
  • Move in and around confined, cluttered, and uneven areas.
  • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights.
  • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings.
  • Visualize objects in three dimensions from drawings.
  • Keep good balance and work at heights.
  • See well (either naturally or with correction).
  • Hear well (either naturally or with correction.)
  • Coordinate the use of eyes, hands, and feet.

HOURS:

This position is a Full-Time position scheduled to work typically 50 hours per week.  Schedule is subject to projects requirements.

TRAVEL:

Travel required up to 90%.  Position requires presence directly on the Project Site location with intermittent travel to residence of record.

 

What's in it for You

Financial Wellbeing

  • Compensation $155,000-$175,000 / year, commensurate with experience

  • Competitive pay with ongoing performance review and merit increase

  • 401(k) with company match & Employee Stock Purchase Plan (ESPP)

  • Flexible spending account (Healthcare & Dependent care)

Health & Wellness

  • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children

  • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance, Weight Management Drug Discount

  • Discounted National Gym Membership Network

Family & Lifestyle

  • Paid Time Off, Paid Ho...


What MasTec employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom