ZipRecruiter

Log In

1

Contract Welding Jobs in Alabama (NOW HIRING)

Austal USA

A Class Structural Welder

Mobile, AL

$34.36/hr

... contract requirements for A Class welding on the vessel. * Demonstrated ability to weld fillets for material thicknesses 4mm- 25mm * Demonstrated ability to weld gusset toe and wraps with minimal ...

Austal USA LLC

A Class Structural Welder

Mobile, AL

$34.36/hr

... contract requirements for A Class welding on the vessel. * Demonstrated ability to weld fillets for material thicknesses 4mm- 25mm * Demonstrated ability to weld gusset toe and wraps with minimal ...

Aerotek

Welder

Tuscaloosa, AL

$32 - $34/hr

Follow established safety procedures, best practices, and quality standards throughout all welding and fabrication activities. Job Type & Location This is a Contract to Hire position based out of ...

Austal

A Class Structural Welder

Mobile, AL · On-site

$34.36/hr

... contract requirements for A Class welding on the vessel. * Demonstrated ability to weld fillets for material thicknesses 4mm- 25mm * Demonstrated ability to weld gusset toe and wraps with minimal ...

Aerotek

Welder

Bessemer, AL

$26 - $30/hr

Perform stick welding as the primary process and complete MIG welding as needed. * Operate or ... Job Type & Location This is a Contract to Hire position based out of Bessemer, AL. Pay and Benefits ...

Aerotek

Tig Welder

Hartselle, AL

$28 - $37/hr

... welding tools and technology. The role requires adherence to safety protocols and quality standards in a dynamic and supportive team setting. Job Type & Location This is a Contract to Hire position ...

Ameri-Force

Pipe Welder 1st Class

Mobile, AL

$50/hr

Perform stainless-steel pipe welding, including restricted open-root welds. * Inspect completed ... our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace ...

Ameri-Force

Pipe Welder 1st Class

Mobile, AL · On-site

$50/hr

Perform stainless-steel pipe welding, including restricted open-root welds. * Inspect completed ... our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace ...

Ameri-Force

Pipe Welder 1st Class

Mobile, AL · On-site

$25.75 - $31.75/hr

... Welding experience * Read and interpret basic drawings and weld symbols. * Pass weld test ... our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace ...

Ameri-Force

Pipe Welder 1st Class

Mobile, AL · On-site

$25.75 - $31.75/hr

... Welding experience * Read and interpret basic drawings and weld symbols. * Pass weld test ... our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace ...

Austal USA

Welder - Manufacturing

Mobile, AL · On-site

$26 - $31.75/hr

... meet contract requirements for A Class welding on the vessel LANGUAGE SKILLS * Ability to read and comprehend simple instructions, short correspondence, and memos. * Ability to write simple ...

Austal USA

Welder - Manufacturing

Mobile, AL · On-site

$26 - $31.75/hr

... meet contract requirements for A Class welding on the vessel LANGUAGE SKILLS * Ability to read and comprehend simple instructions, short correspondence, and memos. * Ability to write simple ...

Ameri-Force

Pipe Welder 1st Class

Mobile, AL · On-site

$23.25 - $29/hr

Pipe Welder 1st Class Pay Range: $23.25 - $29.00 Location: Mobile, AL : * The welder welds together ... our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace ...

previous page

Showing results 41-60

All JobsContract Welding JobsContract Welding Jobs in Alabama

Contract Welding information

See Alabama salary details

$22

$37

$51

How much do contract welding jobs pay per hour?

As of Sep 7, 2026, the average hourly pay for contract welding in Alabama is $37.72, according to ZipRecruiter salary data. Most workers in this role earn between $31.15 and $42.93 per hour, depending on experience, location, and employer.

What is contract welding?

Contract welding is a service where a welder or welding company is hired on a contractual basis to complete specific projects or tasks for a client. This can include anything from fabricating metal structures to repairing equipment. Contract welders may work on-site at a client’s location or in their own workshops, depending on the project requirements. This arrangement allows businesses to access specialized welding skills without committing to hiring full-time staff. It is commonly used in industries like construction, manufacturing, and shipbuilding.

How does a contract welder typically collaborate with other professionals on a job site?

Contract welders frequently work alongside other tradespeople such as fabricators, engineers, and project managers. Effective communication is essential for staying aligned with project specifications and timelines, especially as changes or challenges arise on the job. Welders are often responsible for interpreting blueprints and coordinating with other teams to ensure their work integrates seamlessly with broader construction or manufacturing processes. Building strong working relationships can help prevent delays and promote a safe, efficient work environment.

What are the key skills and qualifications needed to thrive as a contract welder, and why are they important?

To thrive as a Contract Welder, you need proficiency in various welding techniques, blueprint reading, and a relevant welding certification or apprenticeship. Familiarity with tools such as MIG, TIG, and arc welding equipment, as well as safety systems like OSHA regulations, is typically required. Attention to detail, reliability, and strong problem-solving skills help distinguish top performers in this field. These skills and qualities ensure high-quality, safe welds that meet project specifications and deadlines across diverse work environments.

What is the difference between Contract Welding vs Pipe Welding?

AspectContract WeldingPipe Welding
CertificationsWelding certifications (e.g., AWS, CWI)Welding certifications (e.g., AWS, CWI)
Work EnvironmentVarious sites, including construction, manufacturing, maintenancePrimarily on pipelines, oil & gas, industrial plants
Industry UsageConstruction, manufacturing, maintenance projectsOil & gas, water, and gas pipeline industries
Job ScopePerforming welds on different materials and structuresSpecialized welding on pipes and pipelines

Contract Welding involves performing welds across various industries and structures, often on different materials, while Pipe Welding focuses specifically on welding pipes, mainly in the oil, gas, and pipeline sectors. Both roles require similar certifications but differ in work environment and scope.

How much do contract welders get paid?

Contract welders typically earn between $20 and $50 per hour, depending on experience, certifications, and the complexity of the project. Rates can vary based on location, industry, and whether the work is short-term or long-term, with specialized skills often commanding higher pay.

What are the most commonly searched types of Welding jobs in Alabama?

The most popular types of Welding jobs in Alabama are:

What are popular job titles related to Contract Welding jobs in Alabama?

For Contract Welding jobs in Alabama, the most frequently searched job titles are:

What job categories do people searching Contract Welding jobs in Alabama look for?

The top searched job categories for Contract Welding jobs in Alabama are:

What cities in Alabama are hiring for Contract Welding jobs?

Cities in Alabama with the most Contract Welding job openings:

Contract Welding jobs near you
Infographic showing various Contract Welding job openings in Alabama as of August 2026, with employment types broken down into 5% As Needed, 75% Full Time, 5% Contract, and 15% Nights. Highlights an 100% In-person job distribution, with an average salary of $78,452 per year, or $37.7 per hour.

A Class Structural Welder

Austal USA

Mobile, AL

$34.36/hr

Full-time

Re-posted 20 days ago

Austal USA rating

7.4

Company rating: 7.4 out of 10

Based on 38 frontline employees who took The Breakroom Quiz

296th of 499 rated machine equipment manufacturers

Job description

**Now paying up to $34.36 / hr**
REPORTS TO: Structural Supervisor
SUPERVISES: None, but may instruct less-skilled workers
PURPOSE & SCOPE: The general purpose of this position is to weld simple to complex components and/or structures while meeting all safety, quality and schedule requirements.
RESPONSIBILITIES / AUTHORITIES:
  • Working in compliance with all safety, quality, environmental and health requirements, weld a variety of configurations including, but not limited to:
    • Single-pass and multi-pass fillets in all positions, for all joint and material thickness configurations
    • Multi-pass full penetration joint details, for all joint and material thickness configurations
  • May instruct and mentor less-skilled welders, as assigned
  • Works with a sense of urgency, efficiency and productive out put
  • Maintains safe work practices and adheres to safety policies and procedures
  • Ensure correct construction procedures are adhered to in compliance with Austal USA standards and project specifications
  • Ability to work shifts or overtime as required, must be flexible
  • Maintain housekeeping, keep worksite free of rubbish, keep materials and equipment stowed in an orderly manner
  • Capable of keeping waste of consumables and material to an absolute minimum
  • Accountable for completion of daily work assignments including the completion and signatures for work completion and quality
  • Assists Welders, Fitters, Apprentices, and Trades Assistants with daily tasks as directed
  • Assists or work with other trades or Austal USA employees as directed (May be assigned tasks outside craft as required)
  • Monitors working environment for compliance with quality, safety, environmental and health regulations and report deficiencies to supervisor
  • Must comply with the Austal USA's "Equal Opportunity and Anti-Harassment Policy" which expects that all relationships among persons in the workplace will be professional and free of bias, prejudice, and harassment
  • Must comply with the Austal USA's Employee Handbook

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:
  • High level of pride in workmanship
  • Ability to weld in uncomfortable positions where applicable
  • Minimum of 1 year as a B-Class Welder at Austal producing advance fillet welds or 2 years of GMAW MIG welding experience at a comparable employer
  • Ability to pass A Class skills evaluation test to demonstrate welding ability for full penetration joint details
  • Ability to successfully complete onboarding procedures in preparation to pass AL CV weld qualification test requirements to meet contract requirements for A Class welding on the vessel.
  • Demonstrated ability to weld fillets for material thicknesses 4mm- 25mm
  • Demonstrated ability to weld gusset toe and wraps with minimal blending required.
  • Demonstrated ability to weld frame wraps and terminations with minimal blending required.
  • Demonstrated ability to weld T-Bar wraps and terminations with minimal blending required.
  • Demonstrated ability to weld into corners / vertical intersections with minimal blending required
  • Demonstrated ability to evaluate and correct basic weld pick up, with minimal supervision
  • Demonstrated ability to terminate stich welds with minimal weld correction to address minor cosmetic or weld defects
  • Demonstrated ability to weld continuously for 400mm
  • Demonstrated ability to back step and sequence weld based upon provided information and/or good welding practices
  • Demonstrated ability to weld multi-pass fillets with only cosmetic correction required
  • Ability to take direction and follow instructions
  • Good mechanical aptitude with ability to produce consistent quality
  • Ability to inspect and correct basic weld pick-up without supervision
  • Good listening and verbal communication skills
  • Ability to work independently and as part of a team
  • Problem-solving and trouble-shooting skills
  • Excellent hand-eye coordination; good spatial orientation
  • Ability to consistently meet production deadlines
  • Ability to read and interpret and work from construction drawings, job specifications, instruction manuals, manufacturer's handbooks, change orders and contract specifications to obtain weld sizing information and material edge preparation requirements
  • Ability and willingness to work with and to teach less-skilled workers
  • Ability to maintain and perform routine preventive maintenance on welding equipment
  • Ability to wear required PPE

TOOLS: Miller saws, sanders, grinders, burr motors, band saws, skill saws, saws-all, weld machine and applicable components etc.
DIRECTION EXERCISED: None
LIAISES WITH: Supervisor, step-up supervisor, foreman and other tradesmen
ADDITIONAL GUIDELINES:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites.
While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit.
Specific physical requirements include the following:
Must have the ability to bend, squat, stoop, crawl, and kneel. Perform prolonged standing. Ability to turn head from side to side and about the vertical axis. Ability to turn body at the waist from side to side and about the vertical axis. Lift/push/pull 50lbs to 75lbs on an occasional basis. Lift/push/pull up to 20lbs on a frequent basis. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps). Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts. Able to work at a variety of levels (ex. waist, eye, overhead). Demonstrate the ability to safely and appropriately use required tools and equipment. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles. Possess sufficient handgrip and coordination to carry and operate tools and equipment. Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards. Ability to withstand cold and hot temperatures. Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time. Able to respond to verbal and audible sounds/commands. Able to utilize adequate visual skills. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters whole performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed to humid conditions, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud.
SAFETY
Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
Equal Employment Commitment
Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932.
Austal's commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.

What Austal USA employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply