ZipRecruiter

Log In

1

Contract Process Engineer Jobs in Saltillo, MS (NOW HIRING)

CTR Corporation

Be Seen First

Manufacturing Engineer - Electronics Industry

Tupelo, MS · On-site

$90K - $100K/yr

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

CTR Group is currently seeking a Manufacturing Process Engineer for a Manufacturing Plant in ... DoD contracts. Schematics Capture, PCB layout, Simulation Capabilities & others * Generate ...

U.S. Navy

Civil Engineer

Tupelo, MS · On-site

$2.9K - $5.8K/mo

  • Medical

  • Retirement

  • PTO

Simply work toward your degree, earn as you go, and then begin the process of becoming a ... Contract Management--Be the primary contact between Navy and civilian contractors, managing ...

1 point system

Project Engineer

Blue Springs, MS · On-site

Requirement - Project Engineer Location- Blue Springs, MS (100% Onsite) Contract W2 Job Summary ... Automotive paint process experience. * Trade experience, especially sheet metal. * Experience ...

Element Materials Technology

Data Processor

Tupelo, MS · On-site

Propose engineering documents for clients' approval, on-site installation and hands-on monitoring ... Shall be responsible for preparing all necessary reports as specified in the contract's documents ...

L3Harris Technologies

Quality Technician D

Center, MS

$17.75 - $24/hr

Conduct in-process inspections during assembly, pre-test, and post-test processes to identify ... contract, engineering drawing, specification, or other product definitions via the MES.

Constellation Service Company

Operator

Booneville, MS · On-site

$14.25 - $18.75/hr

... developers. Operators should be able to: * Adhere to all company policies, procedures, and OSHA ... Read, interpret, and follow plans, specifications, and other contract documents * Communicate well ...

Liebherr

IT Systems Administrator - Level 2

Tupelo, MS · On-site

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

Manages maintenance renewals and service contracts with hardware suppliers (Vertiv, HP, Dell ... Engineer, configure, and maintain complex virtual machine and cloud server ecosystems ...

Southern Furniture Industries

Logistics Analyst

Pontotoc, MS · On-site

$20 - $25/hr

... in-process inventory, and finished upholstered motion furniture throughout the supply chain. This ... Analyze transportation contracts and assist with carrier selection and rate negotiations. * Support ...

All JobsContract Process Engineer JobsContract Process Engineer Jobs in Saltillo, MS

Contract Process Engineer information

See Saltillo, MS salary details

$46.4K

$86.3K

$133.6K

How much do contract process engineer jobs pay per year?

As of Aug 16, 2026, the average yearly pay for contract process engineer in Saltillo, MS is $86,289.00, according to ZipRecruiter salary data. Most workers in this role earn between $69,900.00 and $96,600.00 per year, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as a contract process engineer, and why are they important?

To thrive as a Contract Process Engineer, you need a solid background in chemical or process engineering, experience with process optimization, and a relevant engineering degree. Familiarity with process simulation software (like Aspen HYSYS or CHEMCAD), project management tools, and safety compliance standards is typically expected. Strong analytical thinking, effective communication, and adaptability are valuable soft skills for managing changing project requirements and collaborating with diverse teams. These skills ensure efficient, safe, and cost-effective process improvements that meet contractual obligations and client expectations.

Do contract process engineers make more money?

Contract process engineers often earn higher hourly rates compared to full-time employees due to the temporary nature of their work and specialized skills. However, they may have less job security and benefits, and total annual income can vary based on project duration and industry demand. Experience, certifications, and technical expertise can also influence earning potential in this role.

How much does a contract process engineer get paid?

A contract process engineer typically earns between $30 and $70 per hour, depending on experience, industry, and location. Salaries can vary based on project scope, certifications, and the complexity of processes managed.

What is a contract process engineer?

Contract Process Engineers are professionals who are hired on a temporary or project-specific basis to design, optimize, and troubleshoot industrial processes within a company. They often work in industries such as chemicals, pharmaceuticals, oil and gas, or manufacturing, providing technical expertise to improve production efficiency, safety, and quality. Their responsibilities may include process design, equipment specification, project management, and ensuring regulatory compliance. Because they work on a contract basis, their assignments may vary in length and scope depending on the needs of the employer.

What is the difference between Contract Process Engineer vs Process Engineer?

AspectContract Process EngineerProcess Engineer
CredentialsBachelor's in Engineering, relevant certifications (e.g., Six Sigma)Bachelor's or higher in Engineering, similar certifications
Work EnvironmentContract-based, project-specific, often in industrial or manufacturing settingsFull-time, ongoing roles in manufacturing, chemical, or industrial plants
Employer & Industry UsageUsed by companies hiring temporary or project-based engineersEmployed by companies for continuous process improvement and operations
Search & Comparison IntentCommonly compared for project-based roles and contract workCompared for permanent roles in process optimization

The Contract Process Engineer typically works on temporary, project-specific assignments, focusing on process improvements within a set timeframe. In contrast, the Process Engineer holds a permanent position, overseeing ongoing operations and continuous process optimization. Both roles require similar qualifications but differ mainly in employment type and work scope.

What types of projects or industries do contract process engineers typically work on, and how does this influence their daily responsibilities?

Contract Process Engineers often work on short- to medium-term assignments across industries such as pharmaceuticals, chemicals, oil and gas, and manufacturing. The nature of their projects can range from process optimization and troubleshooting to equipment commissioning and plant upgrades. Depending on the industry and project scope, daily responsibilities may include conducting process simulations, collaborating with multidisciplinary teams, preparing technical documentation, and ensuring compliance with safety and quality standards. This variety allows for broad experience, but also requires adaptability and strong communication skills to integrate quickly with new teams and workflows.

What cities near Saltillo, MS are hiring for Contract Process Engineer jobs?

Cities near Saltillo, MS with the most Contract Process Engineer job openings:

Contract Process Engineer jobs near you
Infographic showing various Contract Process Engineer job openings in Saltillo, MS as of August 2026, with employment types broken down into 1% As Needed, 78% Full Time, 16% Part Time, 4% Contract, and 1% Nights. Highlights an 92% Physical, 2% Hybrid, and 6% Remote job distribution, with an average salary of $86,289 per year, or $41.5 per hour.

Manufacturing Engineer - Electronics Industry

CTR Corporation

Tupelo, MS • On-site

$90K - $100K/yr

Full-time

Medical, Dental, Vision, Retirement, PTO

Posted 13 days ago

Be Seen First

After you apply to this job, you can share why you’re interested to jump to the top of the candidate list.

Job description

CTR Group is currently seeking a Manufacturing Process Engineer for a Manufacturing Plant in Westpoint, MS.

A Direct-Hire Career Opportunity! Relocation Package available.

Salary Range: $90K - $100K or possibly higher for exceptional candidate plus Excellent Benefits.

Job Summary

The Manufacturing Engineer will provide key support in actively improving and driving processes and productivity. This position will support production, as well as improve and support current manufacturing, documentation and processes metrics. It will also contribute to the improvement of existing processes, and collaborate with product design teams to achieve design for manufacturability.

The Manufacturing Engineer will set up the line that will be manufacturing automotive parts.

Responsibilities

  • Estimate manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines. maintaining labor standards, cost estimates, capacity planning, throughput time standards, floor layouts, and schedules.
  • Perform electrical, software and mechanical designs. Examine and review drawings, blueprints, schematics, work orders, vendor catalogs and other technical data to ensure compliance with specifications and requirements.
  • Develops, implements, and maintains methods, operation sequence and processes in the manufacture or fabrication of parts, components, sub-assemblies, and final assemblies of electronic equipment.
  • Perform new process development, monitor, and maintain the processes in all areas of manufacturing including but not limited to assembly, soldering, coating, prep, and related equipment with consideration of ISO-9001-2000, J-STD-001, IPC-A-61 0 Class 3, and other Surface Mount technology Quality standards relative to DoD contracts. Schematics Capture, PCB layout, Simulation Capabilities & others
  • Generate, implement, and maintain Manufacturing Documentation including but not limited to work instructions, lot travelers, flow diagrams, procedures, and manufacturing proposal documentation. Initiate requests for engineering changes to ensure compliance with established standards.
  • Manage Product life cycle from development stage to obsolescence (PLM)Write and address change requests, to include Engineering Change Requests, Engineering Change Notices, Engineering Change Proposals, Requests for Deviations and Requests for Waivers, Dispositioning.
  • Select, propose, and sometimes design equipment and tooling for manufacturing as well as set up, process development, implementation, and maintenance of said equipment.
  • Evaluate, trouble shoot, recommend, and implement solutions related to all manufacturing processes, operational systems, procedures, and documentation.
  • Interfaces with design engineering in coordinating the release of new products/Processes. Prepare & Perform test plans, test procedures, test reports, reliability and life studies, and reports on failure analysis.
  • Maintains records and reporting systems for coordination of manufacturing operations. One of the main interfaces for customers and vendors for problem solving, bid proposals, and related issues.

KEY PERFORMANCE INDICATORS (KPI’s):

  • On time delivery (optimize process through put and provide technical support)
  • Deliver solutions that maximize productivity of operations team.
  • First Pass Yields, Throughput rate, Reduce COPQ
  • Must be familiar & well versed in reading PCB Routing & 3D Modeling.
  • Experienced with Electronics CAD Software Altium, Cadence, Ki cad, Eagle, Autodesk Fusion

MINUMUM EDUCATION/EXPERIENCE:

  • Bachelors in technical discipline, prefer Electrical, Industrial or Mechanical Engineering
  • Minimum of 4 year’s direct electronics industry experience or an equivalent combination of education and experience.

Equal Opportunity Employer, Disability/Veteran

CTR Group has been a leader in its industry for over 35 years and is rated highly on Google, Indeed and Facebook for being a great company to work for. If you enjoy being a part of a great team, apply today and check out our website for more information.

CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified.

Company Description

CTR group is a full-service employment & recruiting firm, matching the strengths and skills of thousands of candidates with employers. http://jobs.ctrc.com