1

Coating Inspector Jobs in Tacoma, WA (NOW HIRING)

Avionics Dev Lab Technician

Seattle, WA · On-site

$36.60 - $51.23/hr

Experience in staking and conformal coating * Experience with potting * Experience with high ... vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials ...

Showing results 41-49

Coating Inspector information

See Tacoma, WA salary details

$19

$35

$63

How much do coating inspector jobs pay per hour?

As of Aug 14, 2026, the average hourly pay for coating inspector in Tacoma, WA is $35.83, according to ZipRecruiter salary data. Most workers in this role earn between $24.18 and $42.07 per hour, depending on experience, location, and employer.

What does a coating inspector do?

A Coating Inspector is responsible for evaluating and ensuring the quality and integrity of protective coatings applied to surfaces, such as pipelines, tanks, or structural steel. They inspect surface preparation, application processes, and finished coatings to verify compliance with project specifications and industry standards. Coating Inspectors use various tools to measure thickness, adhesion, and detect any defects or irregularities. Their work helps prevent corrosion, extend the lifespan of assets, and ensure safety and regulatory compliance.

How much do coating inspectors make in the US?

Coating inspectors in the US typically earn between $40,000 and $70,000 annually, with the median around $55,000. Salaries vary based on experience, certifications, location, and industry, and inspectors often need knowledge of coating standards and inspection tools.

What is the difference between Coating Inspector vs NDT Technician?

AspectCoating InspectorNDT Technician
CertificationsSSPC, NACE, AWS certificationsASNT, NAS-410 certifications
Work EnvironmentIndustrial sites, construction, offshoreManufacturing, aerospace, oil & gas
Job FocusSurface preparation, coating application, inspectionMaterial testing, flaw detection, non-destructive testing
Industry UsageConstruction, maintenance, industrial coating projectsManufacturing, aerospace, power generation

While both roles involve inspection and testing, a Coating Inspector specializes in surface coatings, ensuring proper application and quality, whereas an NDT Technician focuses on non-destructive testing methods to detect flaws in materials. Both roles require specific certifications and are vital in industrial and construction sectors, but they serve different inspection purposes.

What does a coating inspector do?

A coating inspector checks industrial equipment to ensure protective coatings were correctly applied and minimize corrosion risk. They go through rigorous training to learn how to identify problems in coating applications and to suggest which types of coatings will protect the materials from corroding. Manufacturing plants, roadway projects such as bridges, and other major industries that utilize paint need coating inspectors for quality assurance.

Is coating inspection a stressful job?

Coating inspection can be stressful due to the need for precision, attention to detail, and adherence to safety standards in often challenging environments. Inspectors must identify defects and ensure compliance, which can involve tight deadlines and working in conditions that may be physically demanding or hazardous.

What are some common challenges coating inspectors face when working on large-scale construction projects?

Coating Inspectors on large construction sites often encounter challenges such as coordinating with multiple contractors to ensure coating schedules align with project timelines, dealing with varying weather conditions that can impact coating application and curing, and maintaining strict adherence to industry standards while under tight deadlines. Effective communication with project managers, applicators, and quality control teams is essential to address issues quickly and maintain coating integrity. Navigating these challenges requires strong attention to detail, flexibility, and a proactive approach to problem-solving.

How much do coating inspectors make?

Coating inspectors typically earn between $40,000 and $70,000 annually, depending on experience, certifications, and location. Senior or specialized inspectors with certifications like NACE or SSPC can earn higher salaries, and the job often involves working in industrial or construction environments with safety protocols.

What are the key skills and qualifications needed to thrive as a coating inspector, and why are they important?

To thrive as a Coating Inspector, you need strong knowledge of surface preparation, coating application processes, industry standards, and relevant inspection techniques, often supported by certifications like NACE or SSPC. Familiarity with inspection tools such as dry film thickness gauges, holiday detectors, and documentation software is crucial. Attention to detail, effective communication, and problem-solving abilities are standout soft skills in this field. These competencies ensure coating systems are applied safely and effectively, protecting assets from corrosion and ensuring compliance with project specifications.

What are the most commonly searched types of Coating Inspector jobs in Tacoma, WA?

The most popular types of Coating Inspector jobs in Tacoma, WA are:

What are popular job titles related to Coating Inspector jobs in Tacoma, WA?

For Coating Inspector jobs in Tacoma, WA, the most frequently searched job titles are:

What job categories do people searching Coating Inspector jobs in Tacoma, WA look for?

The top searched job categories for Coating Inspector jobs in Tacoma, WA are:

What cities near Tacoma, WA are hiring for Coating Inspector jobs?

Cities near Tacoma, WA with the most Coating Inspector job openings:

Infographic showing various Coating Inspector job openings in Tacoma, WA as of August 2026, with employment types broken down into 88% Full Time, and 12% Part Time. Highlights an 100% In-person job distribution, with an average salary of $74,528 per year, or $35.8 per hour.

Avionics Dev Lab Technician

Blue Origin, LLC

Seattle, WA • On-site

$36.60 - $51.23/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 11 days ago


Blue Origin rating

8.7

Company rating: 8.7 out of 10

Based on 91 frontline employees who took The Breakroom Quiz

18th of 72 rated aerospace companies


Job description

Application close date:
Applications will be accepted on an ongoing basis until the requisition is closed.
At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight!
This role is part of Advanced Concepts and Enterprise Engineering (ACE), supporting Blue Origin's mission of millions of people living and working in space for the benefit of Earth. The team fosters innovation and drives engineering workflows of the future, shared solutions and standards, simplicity and lower costs, and manufacturable design.
Enterprise Engineering allows all Blue Origin business units to benefit from commonly used capabilities, hardware, and software and assists business units in identifying, selecting, and training engineers from both inside and outside the organization.
As part of a hardworking team of specialists, technicians, and engineers, you will build and test avionics hardware used for flight and non-flight purposes. In this role, you will have impact on many different aspects of spaceflight vehicle development and production!
Special Mentions:
  • Shifts available:
    • M-F 7am-3:30 pm
  • Interviews will include a technical assessment requiring a computer
  • Multiple positions available

Responsibilities include but are not limited to:
  • assembling flight-grade avionics
  • testing and qualifying avionics
  • soldering PCBAs and other component-level board work
  • building wire harness/cable assemblies
  • integrating avionics and ground support hardware into electronics testbeds

Minimum Qualifications:
  • Experience with ESD prevention and controls
  • Thorough understanding of basic electronics theory - voltage, resistance, current
  • Ability to interpret electrical schematics, wiring diagrams, mechanical drawings, and written assembly procedures
  • 3-8 years of experience in assembly of avionics, medical devices, or other similar safety-critical fields
  • Proficient in the use of basic electronic lab test equipment, such as power supplies and handheld multimeters
  • Experience with common hand tools, such as torque wrenches and screw drivers
  • Ability to lift 25 lbs
  • Basic digital literacy and familiarity with Microsoft office suite (Excel, Word, etc)
  • Good written, verbal, and interpersonal communication skills
  • Strong analytical and organizational skills, attention-to-detail, and desire for continuous improvement
  • Ability to thrive as a member of a team

Preferred Qualifications:
  • 2 year Associates degree in electrical or electronic engineering technology
  • Current or expired certifications in PCBA inspection (IPC-A-610),harness assembly (IPC/WHMA-A-620), soldering (J-STD-001), PCBA rework (IPC-7711/7721)
  • Experience with 5S or LEAN Six Sigma
  • Experience with HiPot harness testers
  • Experience in staking and conformal coating
  • Experience with potting
  • Experience with high voltage systems or NFPA 70E training
  • Experience with ANSI-ESD-S20.20
  • Experience with AS9100

Compensation Range for:
WA applicants is $36.60 - $51.23
Other site ranges may differ
Culture Statement
Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles.
Export Control Regulations
Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Background Check
  • Required for all positions: Blue's Standard Background Check
  • Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation
  • Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
  • Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical

Benefits
  • Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program.
  • Stock Options for all regular employees (working at least 20 hours/week)
  • Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays.
  • Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details.

Equal Employment Opportunity
Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see here.
Affirmative Action and Disability Accommodation
Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at EEOCompliance@blueorigin.com. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

What Blue Origin employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom


Blue Origin logo

About Blue Origin

Sourced by ZipRecruiter

Blue Origin is a private aerospace manufacturing and suborbital spaceflight services company based in Kent, Washington, USA. Established in 2000 by Amazon founder Jeff Bezos, the company operates in the cutting-edge aerospace industry aiming to build a future where millions of people can live and work in space. They develop a variety of technologies, with a focus on reusable rocket systems which significantly reduce the cost of space travel. Blue Origin's core mission is to make this vision come to life by incrementally building on its successes with an ultimate vision of dramatic cost reduction and increased reliance on reusable spacecraft.

Industry

Space research administration

Company size

1,001 - 5,000 Employees

Headquarters location

Kent, WA, US

Year founded

2000