1

Cable Installation Apprentice Jobs in New York (NOW HIRING)

... aerial cables and cable laterals on poles. * Trim trees. * Make complete inspections of ... Replace secondary fuses on poles or on customers' installations. * Perform other similar or less ...

... aerial cables and cable laterals on poles. * Trim trees. * Make complete inspections of ... Replace secondary fuses on poles or on customers' installations. * Perform other similar or less ...

... aerial cables and cable laterals on poles. * Trim trees. * Make complete inspections of ... Replace secondary fuses on poles or on customers' installations. * Perform other similar or less ...

... aerial cables and cable laterals on poles. * Trim trees. * Make complete inspections of ... Replace secondary fuses on poles or on customers' installations. * Perform other similar or less ...

Showing results 41-51

Cable Installation Apprentice information

See New York salary details

$12

$20

$26

How much do cable installation apprentice jobs pay per hour?

As of Sep 6, 2026, the average hourly pay for cable installation apprentice in New York is $20.59, according to ZipRecruiter salary data. Most workers in this role earn between $17.36 and $22.88 per hour, depending on experience, location, and employer.

What is a cable installation apprentice?

Cable installation apprentices are entry-level workers who assist in the installation, maintenance, and repair of cables used for telecommunications, internet, and television services. Under the supervision of experienced technicians, apprentices learn how to run cables, connect equipment, troubleshoot issues, and ensure all work meets safety and industry standards. This role typically combines on-the-job training with classroom instruction, helping apprentices develop the skills needed to eventually become fully qualified cable installers.

What does a cable installation apprentice do?

As a Cable Installation Apprentice, your typical day involves assisting experienced technicians with installing, maintaining, and repairing cable systems in residential or commercial settings. Tasks are usually assigned at the start of the shift, either by a supervisor or through a work order system, and can include running cables, setting up equipment, troubleshooting connectivity issues, and interacting with customers to explain services. You’ll often work as part of a small crew, learning hands-on skills while following safety and industry standards. Collaboration is key, as you’ll regularly communicate with team members and occasionally with other trades to ensure smooth installations.

What are the key skills and qualifications needed to thrive as a cable installation apprentice?

To thrive as a Cable Installation Apprentice, you need a basic understanding of electrical systems, manual dexterity, and a high school diploma or equivalent. Familiarity with hand and power tools, safety equipment, and sometimes OSHA certification is typically required. Strong attention to detail, effective communication, and problem-solving skills help you excel in both team environments and when interacting with customers. These skills and qualifications are crucial to ensure safe, reliable, and efficient cable installations that meet industry standards.

What is the difference between Cable Installation Apprentice vs Cable Installer?

AspectCable Installation ApprenticeCable Installer
CredentialsHigh school diploma; on-the-job training; some certificationsHigh school diploma; experience; certifications often preferred
Work EnvironmentTraining sites, construction sites, or job sites under supervisionActive job sites, residential and commercial buildings
Job RoleLearning installation techniques, safety procedures, assisting senior techniciansInstalling, repairing, and maintaining cable systems independently

The main difference is that a Cable Installation Apprentice is in training, gaining skills under supervision, while a Cable Installer is a fully qualified worker performing installations independently. Apprentices focus on learning, whereas installers are responsible for completing projects efficiently and safely.

How do I become a cable installation apprentice?

To become a cable installation apprentice, candidates typically need a high school diploma or equivalent and must pass a background check. Apprenticeship programs are often offered through unions or cable companies and combine on-the-job training with classroom instruction, focusing on skills like cable splicing, wiring, and safety procedures.

What cities in New York are hiring for Cable Installation Apprentice jobs?

Cities in New York with the most Cable Installation Apprentice job openings:

Fully Qualified Lineman/Linewoman

Public Service Enterprise Group

Elizabeth, NJ • On-site

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted yesterday


PSEG rating

8.8

Company rating: 8.8 out of 10

Based on 79 frontline employees who took The Breakroom Quiz

6th of 53 rated energy and utility


Job description

Requisition: 83989
PSEG Company: Public Service Electric & Gas Co.
Salary Range: $ 31.331 - $ 63.764
Work Location Category: Onsite
We're one of the country's largest energy companies, with a vision of powering a future where people use energy more efficiently and it's safer and delivered more reliably than ever. We're also deeply connected to the communities we serve, with more than 13,000 employees working together to support our customers and make a difference every day.
Here, you'll have the stability and exciting opportunities that come with being a Fortune 500 company - along with a supportive, friendly work environment where your contributions are valued.
We offer a flexible work environment designed to balance employee needs with collaboration and operational excellence. Roles fall into two categories:
Onsite: Employees work onsite daily.
Hybrid: A blend of remote and onsite work, with at least three onsite days per week required.
As an employee, if you are regularly scheduled to work 20 or more hours per week, you will have access to a wide range of comprehensive benefits from day one, designed to support your total well-being: medical, dental, vision, parental leave and family leave programs, behavioral health programs, 401(k) with company match, life insurance, tuition reimbursement, and generous paid time off.
More than 13,000 people already call PSEG their work home, taking pride in providing safe, reliable service to millions of customers. If you're looking for a place where you can build a meaningful career and help power and support our communities, we'd love to welcome you to the team.
PSEG is not offering visa sponsorship for this position.
Union Local
IBEWE 94
Summary
As the employee becomes qualified through acquired experience and training performs the work required in the construction, operation, maintenance, and removal of transmission and distribution lines on wood poles, including work on iron poles, isolated towers and mats or vaults, which may be energized but not above 13-kV primary distribution voltage. Check general operation of assigned vehicle and associated equipment and perform other similar or less skilled work of the occupational group. Incumbent will be expected to respond to off hour work (i.e., schedule and call out / standby for regular work and storms and may be required to work shifts outside the normal workday filling in for Trouble-shooters in operations.).
Central Electric Division which has a main Headquarters in Somerset and a Sub Headquarters in Elizabeth. Assigned work location could be Somerset or Elizabeth depending on workload and business need.
*Sign on bonus available for qualified applicants who successfully complete the pre-employment process and meet the time requirement for bonus eligibility.
Job Responsibilities
  • Perform work on de-energized lines and assists Linemen/Linewomen on energized secondary lines.
  • Transfer construction, change insulators, cross arms, pins, and make other similar repairs on energized 13kV pole line transmission circuits.
  • Construct, install, remove and maintain items such as, but not limited to: Poles, crossarms, guy wires, and line hardware.
  • Install, sag, remove and maintain line conductors including splicing, tapping, and the making of dead ends; install, remove and maintain messengers; install and remove aerial cables and cable laterals on poles.
  • Trim trees.
  • Make complete inspections of construction performing such work as tighten hardware, tie in conductors, and change insulators and pins.
  • Make voltage and load tests on energized distribution circuits or equipment.
  • Locate faults on 13 and 26 kV transmission and on distribution circuits, including associated equipment.
  • Under the supervision of an engineer or supervisor, make special tests on distribution equipment and phase-out or parallel distribution circuits and equipment.
  • Perform any work required on isolated towers, install, remove and maintain distribution, 13 and 26 kV conductors and accessories on tower lines.
  • Serve as Troubleshooter.
  • Replace secondary fuses on poles or on customers' installations.
  • Perform other similar or less skilled work of the occupational group.
  • Sign on bonus available for qualified applicants who successfully complete the pre - employment process and meet the time requirement for bonus eligibility.
  • Hire must stay in Fully Qualified Lineperson or Troubleshooter classification for 24 months to retain Hiring Bonus. Hiring Bonus paid out after 12 months of employment.

Job Qualifications
Must meet the Company's "General Requirements"; and in addition:
  • High School Diploma or GED Required.
  • Need to have successfully completed a recognized apprentice program and be a first class journeyman lineperson. Be able to perform maintenance and repair work safely and without causing interruption to service.
  • Have a good practical knowledge of the purpose and functioning of the overhead transmission and distribution system, and the electrical apparatus used in connection therewith; and a general knowledge of the layout of transmission and distribution circuits in the area in which he/she works.
  • Become familiar with the procedure and rules governing the ordering out, tagging and releasing of circuits and the Company's system of circuit designation for identification.
  • Acquire a good working knowledge of the Company's overhead line construction methods and practices. Be proficient in the application of pole top resuscitation, and other approved methods of artificial respiration.
  • Be alert in avoiding accidents and observing hazards. Be approved by the Joint Employee Qualification Committee after passing the written tests and physical assessments, DOT Physical Examination, and Background investigation/Drug Screening.
  • Be able to follow instructions and perform routine operations. Have mechanical aptitude. Have the physical characteristics to enable him/her to climb and work on structures and poles.
  • Know how to read construction prints and make simple field sketches. Understand the application of hoists, tackle, and knots used in line construction and maintenance work and the care of tools commonly used in line construction and maintenance work.
  • Know how to identify and use all material, tools, and equipment commonly used on line work.
  • Prepare for and pass the Class 'A' CDL driving test within the first year of employment.
  • Provide certifications and licenses. DOT testing is required for this safety-sensitive position.
  • Must possess a U.S. driver's license and maintain a satisfactory driving record.
  • This is a safety-sensitive position. DOT testing is required

Desired
  • A valid Class 'A' Commercial Driving License (CDL) but a valid Class 'B' CDL candidate (21 years or older) will be considered.

Some positions at PSEG require access to information covered by the Department of Energy's regulation 10 CFR 810 (Part 810). If applicable, the successful applicant must prove they are: (1) a citizen or national of the USA; OR (2) a lawful permanent resident of the United States (Non-Conditional Permanent I-551 / Green Card / Permanent Resident Card holder); OR (3) a citizen, national, or permanent resident of a "Generally Authorized" destination on the attached list not also a citizen, national, permanent resident of any country not listed; OR (4) a "Protected Individual" under the Immigration and Naturalization Act (8 U.S.C 1324b(a)(3)).
As an employee of PSEG, you should be aware that during emergency restoration efforts, you may be required to perform functions outside of your routine duties and on a schedule that may be different from normal operations.
For all roles, PSEG's drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing.
Employees who are hired or transfer into a federally regulated role (including positions covered by USDOT, PHMSA, or NRC regulations) are subject to random drug and alcohol testing, inclusive of marijuana. Although numerous states throughout the country have legalized marijuana/cannabis products recreationally and medically, the use of these products are prohibited for employees in federally regulated roles. Please note that the use of CBD products may result in a positive drug test for THC/Marijuana and such use is not a legitimate medical explanation for a positive result.
If you are a current PSEG Long Island (PSEGLI) employee and offered an opportunity with PSEG or any of its subsidiaries other than PSEGLI, you will be treated as a new hire. Please note that as a new hire to PSEG, your benefits will change and generally will be consistent with other similarly situated PSEG new hires. Similarly, for PSEG employees who accept job opportunities with PSEGLI, your benefits will change and generally be consistent with other similarly situated new hires of PSEGLI.
PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic. Legally protected characteristics include race, color, religion, national origin, sex, age, marital status, sexual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals.
PSEG is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-3845 or email accommodations@pseg.com.
If you need to request a reasonable accommodation to perform the essential functions of the job, email accommodations@pseg.com. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.
ADDITIONAL EEO INFORMATION (Click link below)
Know your Rights: Workplace Discrimination is Illegal

What PSEG employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom


PSEG logo

About PSEG

Sourced by ZipRecruiter

This is an exciting time to be joining PSEG. Our commitments, which include safety, integrity, customer focus, and diversity & inclusion, are the fabric of our culture and help drive the success of our business. We are fortunate to have an outstanding workforce of diverse and highly skilled talent who move us forward in our operational excellence journey. PSEG has more than 12,000 employees who are dedicated to the communities we serve and embody our vision: People providing Safe, Reliable, Economic and Greener Energy.

Industry

Clean energy services

Company size

10,000+ Employees

Headquarters location

Newark, NJ, US