ZipRecruiter

Log In

1

Associate Site Reliability Engineer Jobs in Kiln, MS

AECOM

Electrical Engineer (BESS Focus)

New Orleans, LA · On-site +1

... and reliability as well as those utility scale projects seeking to power communities via ... new site development, data centers and more. Focused on a BESS experience, we are looking for a ...

nGenium

Imaging Field Service Engineer

New Orleans, LA · On-site

$90K - $105K/yr

Provide on-site technical support for Siemens diagnostic imaging systems. Troubleshoot, repair, and ... Associate degree in a relevant field or equivalent experience. Four or more years of experience in ...

Loc Performance Products, Inc.

Quality Engineer

Slidell, LA · On-site

$62K - $80K/yr

... and reliability standards. * Cross-Functional Collaboration: Ensures feedback is integrated from ... When needed, participate on site at suppliers for program and/or critical issues requiring ...

American Rheinmetall

Quality Engineer

Slidell, LA · On-site

$62K - $80K/yr

... and reliability standards. * Cross-Functional Collaboration: Ensures feedback is integrated from ... When needed, participate on site at suppliers for program and/or critical issues requiring ...

Novaces LLC

Jr Installation Technician

New Orleans, LA · On-site

$21.25 - $26.25/hr

... cabling assistance, site cleanup, and general installation support. The Junior Engineering ... Strong work ethic, reliability, and willingness to learn new technical skills. * Willingness and ...

NOVACES

Jr Installation Technician

New Orleans, LA · On-site

$21.25 - $26.25/hr

... cabling assistance, site cleanup, and general installation support. The Junior Engineering ... Strong work ethic, reliability, and willingness to learn new technical skills. * Willingness and ...

NOVACES

Jr Installation Technician

New Orleans, LA

$21.25 - $26.25/hr

... cabling assistance, site cleanup, and general installation support. The Junior Engineering ... Strong work ethic, reliability, and willingness to learn new technical skills. * Willingness and ...

previous page

Showing results 41-60

All JobsAssociate Site Reliability Engineer JobsAssociate Site Reliability Engineer Jobs in Kiln, MS

Associate Site Reliability Engineer information

See Kiln, MS salary details

$8

$50

$73

How much do associate site reliability engineer jobs pay per hour?

As of Aug 6, 2026, the average hourly pay for associate site reliability engineer in Kiln, MS is $50.89, according to ZipRecruiter salary data. Most workers in this role earn between $43.75 and $58.17 per hour, depending on experience, location, and employer.

What is the difference between Associate Site Reliability Engineer vs Software Engineer?

AspectAssociate Site Reliability EngineerSoftware Engineer
Required CredentialsBachelor's in CS or related field, some certifications (e.g., Linux, cloud)Bachelor's in CS or related field, coding certifications often preferred
Work EnvironmentOperations-focused, maintaining system reliability, monitoringDevelopment-focused, designing and coding software applications
Employer & Industry UsageTech companies, cloud providers, SaaS firmsTech companies, startups, software firms
Common Search & Comparison IntentUnderstanding roles in reliability and operationsUnderstanding software development roles

Associate Site Reliability Engineers focus on maintaining system stability, monitoring, and incident response, often working closely with operations teams. Software Engineers primarily develop, test, and deploy software applications. While both roles require strong technical skills and a background in computer science, their core responsibilities differ—one emphasizes reliability and system health, the other software creation.

Associate Site Reliability Engineer jobs near you
Infographic showing various Associate Site Reliability Engineer job openings in Kiln, MS as of August 2026, with employment types broken down into 1% As Needed, 69% Full Time, 27% Part Time, 1% Temporary, and 2% Contract. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution, with an average salary of $105,850 per year, or $50.9 per hour.

Instrumentation Electrical Specialist

Engineers and Constructors International Inc

New Orleans, LA • On-site

Contractor

Posted 24 days ago

Job description

Join the ECI Group's Professional Technical Services Network as a onsite Instrumentation & Electrical (I&E) Specialist. This an 18- 24-month duration from award based in the New Orleans (Waggaman) area. Note: You must be a US Citizen or Permanent US Resident to qualify for this position.
About our Client
Our client is developing and operating a major chemical manufacturing facility in Waggaman, Louisiana, producing Dimethyl Carbonate (DMC) and Ethyl Methyl Carbonate (EMC) for the battery supply chain. The site is a petrochemical/chemical manufacturing operation requiring engineering support for construction, commissioning, startup, reliability, maintenance, and operations activities
Position Summary
The Instrumentation & Electrical (I&E) Specialist is responsible for the installation, calibration, maintenance, troubleshooting, testing, and reliability of electrical, instrumentation, and control systems within a chemical plant. The role ensures safe, reliable, and efficient plant operation by maintaining critical electrical equipment, field instruments, control systems, analyzers, and process automation systems in compliance with regulatory and safety standards.
Key Responsibilities
Instrumentation Maintenance and Reliability
  • Install, calibrate, inspect, and maintain field instrumentation.
  • Troubleshoot instrument failures and process control issues.
  • Maintain pressure, temperature, flow, and level transmitters.
  • Maintain control valves, positioners, regulators, and actuators.
  • Perform loop checks, functional testing, and instrument verification.
  • Ensure instrument accuracy and compliance with calibration schedules.
Electrical Systems Maintenance
  • Maintain low-voltage and medium-voltage electrical systems.
  • Troubleshoot motors, motor control centers (MCCs), transformers, and switchgear.
  • Support maintenance of variable frequency drives (VFDs) and soft starters.
  • Perform electrical testing and inspections.
  • Ensure electrical installations comply with applicable codes and standards.
Control Systems Support
  • Maintain Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), and SCADA systems.
  • Troubleshoot control logic and communication issues.
  • Support control system upgrades and migrations.
  • Verify alarm and interlock functionality.
  • Ensure critical control systems remain operational and secure.
Analyzer and Process Control Equipment Support
  • Maintain process analyzers including:
  • pH analyzers
  • Conductivity analyzers
  • Gas detectors
  • Oxygen analyzers
  • Moisture analyzers
  • Chromatographs
  • Perform analyzer calibration and validation.
  • Troubleshoot sampling systems and analyzer shelters.
Preventive and Predictive Maintenance
  • Execute preventive maintenance programs for electrical and instrumentation assets.
  • Utilize condition-monitoring tools to predict equipment failures.
  • Review equipment health reports and recommend corrective actions.
  • Improve asset reliability through proactive maintenance strategies.
Troubleshooting and Root Cause Analysis
  • Investigate electrical and instrumentation failures.
  • Conduct Root Cause Failure Analysis (RCFA).
  • Develop corrective and preventive action plans.
  • Work with operations and engineering teams to resolve acute and recurring equipment issues.
  • Minimize plant downtime through rapid technical response.
Process Safety Support
  • Support Process Safety Management (PSM) programs.
  • Maintain Safety Instrumented Systems (SIS) and Emergency Shutdown Systems (ESD).
  • Verify functionality of safety interlocks and critical alarms.
  • Support Management of Change (MOC) activities.
Project and Turnaround Support
  • Support capital projects and plant modifications.
  • Review electrical and instrumentation drawings and specifications.
  • Participate in commissioning and startup activities.
  • Coordinate contractor activities during shutdowns and turnarounds.
  • Conduct Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT).
Documentation and Compliance
  • Update electrical one-line diagrams, loop drawings, and control narratives.
  • Ensure compliance with OSHA, NFPA, NEC, ISA, IEC, API, and company standards.
  • Review and update maintenance procedures and work instructions.
Continuous Improvement
  • Identify opportunities to improve control system performance and reliability.
  • Recommend energy-saving initiatives.
  • Support automation and digitalization projects.
  • Implement reliability and maintenance best practices.
  • Train technicians and operations personnel on new systems and technologies.
  • Participate in Process Safety Management (PSM) activities, including HAZOP, LOPA, and SIL reviews.
  • Maintain project documentation and ensure accurate records are updated throughout the project lifecycle.
  • Support project schedules, cost control efforts, and continuous improvement initiatives.

Required Qualifications
  • 5+ years of experience in chemical, petrochemical, refinery, power generation, or manufacturing facilities.
  • Strong knowledge of industrial instrumentation, electrical systems, and process control.
  • Experience with PLC, DCS, SIS, and industrial communication networks.

Key Skills
  • Instrument Calibration and Testing
  • Electrical Troubleshooting
  • PLC Programming and Maintenance
  • DCS and SCADA Systems
  • Safety Instrumented Systems (SIS)
  • Process Control and Automation
  • Root Cause Failure Analysis (RCFA)
  • Loop Checking and Commissioning
  • Industrial Networking and Communications
  • Project Coordination
  • Process Safety Management (PSM)
Chemical Plant-Specific Equipment Experience
  • Pressure, temperature, flow, and level instruments
  • Control valves and actuators
  • DCS (Honeywell, Emerson Delta V, Yokogawa, ABB)
  • PLCs (Allen-Bradley, Siemens, Schneider)
  • Gas detection systems
  • Motor control centers (MCCs)
  • Switchgear and transformers
  • Compressors, pumps, reactors, and utility systems
  • Safety shutdown and emergency response systems (ESD/SIS)
Physical Requirements
  • Ability to conduct field inspections in industrial plant environments.
  • Ability to climb stairs, ladders, and access operating units as required.
  • Ability to wear required personal protective equipment (PPE).
  • Ability to travel periodically for vendor visits, construction support, commissioning, and startup activities.
Reports To: Maintenance & Engineering Manager
FLSA Status: Full-Time, Exempt
Please Note: The ECI Group uses AI-assisted tools in the early stages of application review, with all decisions guided by human oversight and fully compliant with General Data Protection Regulation (GDPR) and ECI Group's applicable data protection policies and Privacy Notice.

Apply