ZipRecruiter

Log In

1

Assistant First Article Inspector Jobs in Santa Clara, CA

Archer

Sr Product Quality Engineer

San Jose, CA · On-site

$126K - $150K/yr

... inspection plans Conduct or support First Article Inspection in compliance with SAE AS9102 ... tools Assist in the planning and process for company inspection in support of FAA and Company ...

MC Test Service Inc

SMT 2 QC

Fremont, CA · On-site

$22 - $25/hr

This position is also responsible first piece inspection as well as first article reports. Have the knowledge to access company procedures and navigate shop floor controls. Duties: * Inspect product ...

Sierra Circuits

QA Inspector

San Jose, CA · On-site

First Article Inspection (FAI): Perform SMT FAI (pre-reflow & post-reflow) and PTH FAI. Complete the FAI report or AS9102 as requested for Aerospace products. * Traveler and Certificate of ...

LTA Research

Quality Technician

Mountain View, CA · On-site

$38 - $46/hr

Experience performing first article inspections (FAI), in-process inspections, and final ... These tools assist our recruitment team but do not replace human judgment. Final hiring decisions ...

LTA Research

Quality Technician

Mountain View, CA · On-site

$38 - $46/hr

Experience performing first article inspections (FAI), in-process inspections, and final ... These tools assist our recruitment team but do not replace human judgment. Final hiring decisions ...

Aerotek

Mechanical Inspector

Union City, CA

$27 - $34/hr

Carry out first article inspections. * Engage in quality assurance and control activities. * Perform precise measurements, which constitute 80% of the job. Essential Skills * Proficiency in reading ...

Swagelok Northern California

Quality Engineer

Fremont, CA · On-site

$107K - $153K/yr

Provide quality engineering support for new and existing products through first-piece approvals, First Article Inspection Reports (FAIR), and validation of manufacturing processes. * Participate in ...

Swagelok Northern California

Quality Engineer

Fremont, CA · On-site

$78K - $101K/yr

Provide quality engineering support for new and existing products through first-piece approvals, First Article Inspection Reports (FAIR), and validation of manufacturing processes. * Participate in ...

LTA Research

Quality Technician

Mountain View, CA

$38 - $46/hr

Experience performing first article inspections (FAI), in-process inspections, and final ... These tools assist our recruitment team but do not replace human judgment. Final hiring decisions ...

Verify

Quality Engineer 1

Mountain View, CA · On-site

$47/hr

Previous experience performing and/or evaluating First Article Inspections * Previous experience with blueprint reading * Previous experience in Root Cause analysis and Corrective Action/Preventative ...

Verify

Quality Engineer 1

Mountain View, CA · On-site

$47/hr

Previous experience performing and/or evaluating First Article Inspections * Previous experience with blueprint reading * Previous experience in Root Cause analysis and Corrective Action/Preventative ...

previous page

Showing results 41-60

All JobsFirst Article Inspector JobsAssistant First Article Inspector JobsAssistant First Article Inspector Jobs in Santa Clara, CA

Assistant First Article Inspector information

What is the difference between Assistant First Article Inspector vs Quality Control Inspector?

AspectAssistant First Article InspectorQuality Control Inspector
CredentialsHigh school diploma, training in inspection proceduresHigh school diploma, training or certification in quality control
Work EnvironmentManufacturing plants, assembly linesManufacturing facilities, inspection stations
Employer & IndustryAutomotive, aerospace, electronics industriesVarious manufacturing sectors including automotive, consumer goods
Primary FocusAssist in inspecting first articles for complianceInspect finished products for defects and quality standards

The Assistant First Article Inspector primarily supports the inspection of initial production samples to ensure they meet specifications, while the Quality Control Inspector performs ongoing inspections of finished products to maintain quality standards. Both roles require similar training but focus on different stages of the manufacturing process.

What are the most commonly searched types of First Article Inspector jobs in Santa Clara, CA? The most popular types of First Article Inspector jobs in Santa Clara, CA are:
What are popular job titles related to Assistant First Article Inspector jobs in Santa Clara, CA? For Assistant First Article Inspector jobs in Santa Clara, CA, the most frequently searched job titles are:
What job categories do people searching Assistant First Article Inspector jobs in Santa Clara, CA look for? The top searched job categories for Assistant First Article Inspector jobs in Santa Clara, CA are:
What cities near Santa Clara, CA are hiring for Assistant First Article Inspector jobs? Cities near Santa Clara, CA with the most Assistant First Article Inspector job openings:
Assistant First Article Inspector jobs near you
Infographic showing various Assistant First Article Inspector job openings in Santa Clara, CA as of June 2026, with employment types broken down into 1% As Needed, 97% Full Time, 1% Temporary, and 1% Contract. Highlights an 88% Physical, 1% Hybrid, and 11% Remote job distribution.

CNC lathe machinist

Sematool Precision Mfg Inc

Santa Clara, CA • On-site

$25/hr

Full-time

Re-posted 26 days ago

Job description

CNC Lathe Machinist / Programmer
Department: Manufacturing / Machine Shop
Reports To: Manufacturing Supervisor / Machine Shop Manager
Employment Type: Full-Time
Classification: Hourly / Non-Exempt
Position Summary
We are seeking an experienced CNC Lathe Machinist / Programmer to set up, program, operate, and troubleshoot CNC turning equipment used to manufacture precision components. This position is responsible for producing parts that meet engineering drawings, dimensional requirements, quality standards, and production schedules.
The ideal candidate has strong CNC lathe setup and programming experience, understands machining processes and tooling, and is comfortable independently taking a part from drawing through programming, setup, first-article inspection, and production.
Essential Duties and Responsibilities
  • Program, set up, and operate CNC lathes and turning centers.
  • Create and modify CNC programs using G-code and M-code.
  • Read and interpret engineering drawings, blueprints, GD&T, work instructions, and manufacturing specifications.
  • Determine appropriate machining sequences, cutting tools, workholding methods, speeds, feeds, and cutting parameters.
  • Perform complete machine setups, including installation and alignment of tooling, inserts, jaws, fixtures, and workholding devices.
  • Set tool offsets, work coordinates, and machining parameters.
  • Perform first-article machining and verify dimensions before releasing parts for production.
  • Inspect finished components using micrometers, calipers, height gauges, bore gauges, thread gauges, optical comparators, and other precision measuring equipment.
  • Make program and tooling adjustments to maintain dimensional accuracy and process capability.
  • Troubleshoot machining, tooling, programming, workholding, and dimensional problems.
  • Monitor tool wear and replace or adjust cutting tools as required.
  • Optimize CNC programs and machining processes to improve cycle time, tool life, quality, and productivity.
  • Machine components to close tolerances and maintain consistent part quality.
  • Document program revisions, tooling information, setup requirements, and process changes.
  • Follow established quality procedures and properly identify and report nonconforming material.
  • Perform routine machine maintenance, cleaning, and basic troubleshooting.
  • Maintain an organized and safe work area.
  • Follow all company safety policies, manufacturing procedures, and quality requirements.
  • Work closely with engineering, quality, production, and other machinists to resolve manufacturing issues.
  • Assist in training CNC operators and less-experienced machinists when required.
Required Qualifications
  • High school diploma, GED, or equivalent technical experience.
  • Minimum 3–5 years of CNC lathe machining experience preferred.
  • Demonstrated experience programming and setting up CNC turning equipment.
  • Strong knowledge of G-code and M-code CNC programming.
  • Ability to independently perform CNC lathe setups and program modifications.
  • Strong understanding of machining fundamentals, including speeds, feeds, cutting tools, inserts, materials, and workholding.
  • Ability to read and interpret complex mechanical drawings and machining specifications.
  • Working knowledge of Geometric Dimensioning and Tolerancing (GD&T).
  • Experience machining parts to tight tolerances.
  • Proficiency with precision inspection equipment, including micrometers, calipers, bore gauges, height gauges, and thread gauges.
  • Ability to perform shop mathematics, including decimals, fractions, geometry, and basic trigonometry.
  • Strong mechanical aptitude and troubleshooting skills.
  • Ability to work independently while maintaining production and quality requirements.
Preferred Qualifications
  • Experience with CNC controls such as Fanuc, Haas, Mazak, Okuma, or similar systems.
  • Experience with live tooling, sub-spindles, Y-axis turning centers, or multi-axis CNC equipment.
  • Experience with CAM programming software such as Mastercam, GibbsCAM, Esprit, Fusion, or similar software.
  • Experience machining stainless steel, aluminum, brass, copper alloys, plastics, and other engineered materials.
  • Experience working in a precision manufacturing environment.
  • Experience manufacturing components for aerospace, medical, semiconductor, electronics, defense, or other high-precision industries.
  • Familiarity with ISO 9001, AS9100, or similar quality management systems.
  • Experience performing first-article inspections.
Knowledge and Skills
Successful candidates should demonstrate:
  • CNC turning and machining expertise
  • CNC programming and program optimization
  • Blueprint and GD&T interpretation
  • Tool selection and workholding
  • Precision measurement and inspection
  • Root-cause troubleshooting
  • Attention to detail
  • Quality awareness
  • Good documentation practices
  • Time management and production planning
  • Effective communication and teamwork
Physical Requirements
  • Ability to stand and work at CNC machines for extended periods.
  • Ability to lift and move materials, tooling, and fixtures up to approximately 40–50 pounds with appropriate assistance when required.
  • Ability to perform repetitive hand and arm movements.
  • Ability to safely use hand tools, measuring equipment, and manufacturing machinery.
  • Ability to work in a manufacturing environment where exposure to machine noise, coolant, oils, metal chips, and moving equipment may occur.
Performance Expectations
The CNC Lathe Machinist / Programmer is expected to:
  • Produce components that consistently meet drawing and quality requirements.
  • Complete machine setups accurately and efficiently.
  • Maintain accurate CNC programs and setup documentation.
  • Minimize scrap, rework, tooling costs, and machine downtime.
  • Identify and resolve machining problems before they affect production.
  • Continuously improve machining processes, cycle times, and tooling performance.
  • Maintain a safe, clean, and organized work environment.