Assembler Fitter Jobs in Decatur, IL (NOW HIRING)

Welder Leadman - Industrial

Summary:  Reads and interprets isometric drawings, blueprints and other drawings or product specification instructions.  Lays out, assembles, installs, and maintains pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems.  This is accomplished by performing the following essential duties and responsibilities.  Other duties may be assigned.

• Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders.
• Assemble and secure pipes, tubes, fittings, and related equipment, according to specifications, by welding, brazing, cementing, soldering, and threading joints.
• Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or welding equipment.
• Inspect, examine, and test installed systems and pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods.
• Measure and mark pipes for cutting and threading.
• Lay out full scale drawings of pipe systems, supports, and related equipment, following blueprints. 
• Plan pipe system layout, installation, or repair according to specifications.
• Select pipe sizes and types and related materials, such as supports, hangers, and hydraulic cylinders, according to specifications.
• Cut and bore holes in structures, such as bulkheads, decks, walls, and mains, prior to pipe installation, using hand and power tools. 
• Modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools.
• Install automatic controls used to regulate pipe systems.
• Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches.
• Remove and replace worn components.
• Prepare cost estimates for clients.
• Inspect work sites for obstructions and to ensure that holes will not cause structural weakness.
• Operate motorized pumps to remove water from flooded manholes, basements, or facility floors.
• Dip nonferrous piping materials in a mixture of molten tin and lead to obtain a coating that prevents erosion or galvanic and electrolytic action.

Supervisory Responsibilities - May directly supervises 1 to 5 pipe fitter helpers in the Operations Department. Carries out supervisory responsibilities in accordance with the Austin Industrial’s policies & procedures and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.

Competencies - To perform the job successfully, an individual should demonstrate the following competencies :

Problem Solving - Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully; develops alternative solutions; works well in group problem solving situations; uses reason even when dealing with emotional topics.

Project Management - Completes projects on time and budget.Technical Skills - Assesses own strengths and weaknesses; pursues training and development opportunities; strives to continuously build knowledge and skills; shares expertise with others.

Customer Service - Manages difficult or emotional customer situations; responds promptly to customer needs; meets commitments.

Interpersonal Skills - Focuses on solving conflict, not blaming; listens to others without interrupting; keeps emotions under control.

Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; responds well to questions.

Written Communication - Writes clearly and informatively; able to read and interpret written information.

Teamwork - Balances team and individual responsibilities; exhibits objectivity and openness to others' views; gives and welcomes feedback; Contributes to building a positive team spirit; establishes and maintains constructive working relationships; puts success of team above own interests; able to build morale and group commitments to goals and objectives; supports everyone's efforts to succeed.

Visionary Leadership - Displays passion and optimism; inspires respect and trust.

Change Management - Builds commitment and overcomes resistance; monitors transition and evaluates results.

Leadership - Exhibits confidence in self and others; inspires and motivates others to perform well; effectively influences actions and opinions of others; accepts feedback from others; gives appropriate recognition to others.

Quality Management - Looks for ways to improve and promote quality; demonstrates accuracy and thoroughness.

Cost Consciousness - Works within approved budget; develops and implements cost saving measures; contributes to profits and revenue; conserves organizational resources.

Diversity - Shows respect and sensitivity for cultural differences; promotes a harassment-free environment.

Ethics - Treats people with respect; Keeps commitments; inspires the trust of others; works with integrity and ethically; upholds organizational values.

Organizational Support - Follows policies and procedures; supports organization's goals and values.

Judgment - Displays willingness to make decisions; exhibits sound and accurate judgment; includes appropriate people in decision-making process; makes timely decisions.

Motivation - Measures self against standard of excellence.

Planning/Organizing - Prioritizes and plans work activities; uses time efficiently; sets goals and objectives.

Professionalism - Approaches others in a tactful manner; reacts well under pressure; treats others with respect and consideration regardless of their status or position; accepts responsibility for own actions; follows through on commitments.

Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality.

Quantity - Meets productivity standards; completes work in timely manner; strives to increase productivity; works quickly.

Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly.

Adaptability - Adapts to changes in the work environment; changes approach or method to best fit the situation; able to deal with frequent change, delays, or unexpected events.

Attendance/Punctuality - Is consistently at work and on time; ensures work responsibilities are covered when absent; arrives at meetings and appointments on time.

Dependability - Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan.

Initiative - Volunteers readily; undertakes self-development activities; seeks increased responsibilities; looks for and takes advantage of opportunities; asks for and offers help when needed.

Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

 Education and/or Experience - High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience.

Language Skills - Ability to read and comprehend simple instructions, short correspondence, and memos.  Ability to write simple correspondence.  Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.

Mathematical Skills - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.

Reasoning Ability -Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.  Ability to deal with problems involving several concrete variables in standardized situations.

Computer Skills - Computer skills are not required for this position.

Certificates, Licenses, Registrations – Depending on the job site, certain certificates or licenses may be required.

Other Skills and Abilities - For safety reasons, it is imperative that the employee be able to read and speak fluent English.

Other Qualifications - It may be necessary to travel or commute for this position.

Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds.  Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions and vibration. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment is usually loud.

Austin ("The Company") is an equal employment opportunity employer. The Company's policy prohibits discrimination against any applicant or employee based on race, color, sex, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. The Company also prohibits harassment of applicants or employees based on any of these protected categories. It is also the Company's policy to comply with all federal, state and local laws respecting consideration of unemployment status in making hiring decisions.

Benefits & Compensation

We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. We are proud to be a 100% Employee-Owned Company (ESOP)! To learn more about our employee-ownership structure, please go to https://www.austin-ind.com/our-company/100-employee-owned.

Austin Industries is an Equal Opportunity Employer.

See the “Know Your Rights” poster available in English and Spanish.

About Austin Industries

 Austin Industries and its operating companies engage in almost every type of civil, commercial and industrial construction. Austin is owned entirely by its employees through its Employee Stock Ownership Plan (ESOP). Austin Industries has a rich history. We are one of the largest and most diversified construction firms in the nation. Austin stands on the core values of Uncompromising Integrity, Employee-ownership, Exemplary Service and Excellence in Safety.

To learn more about our history, culture and operations, visit us at www.austin-ind.com.

No Third-Party Inquiries Please

 This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so (i.e., payment must be required pursuant to the terms of a written agreement). 

Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company.

Accessibility Note

If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at (877) 831-1217.