ZipRecruiter

Log In

1

Apprentice Scaffolding Jobs in Spring Valley, CA

City of San Diego

Welder

San Diego, CA

$69K - $82K/yr

Work in high places on scaffolding and/or ladders. Be clean shaven and able to pass a respirator ... Successful completion of a state-accredited four-year Welder Apprenticeship Program in combination ...

City of San Diego, CA

Welder

San Diego, CA · On-site

$69K - $82K/yr

Work in high places on scaffolding and/or ladders. * Be clean shaven and able to pass a respirator ... Proof of apprenticeship completion, if utilized to meet the minimum requirements. * For City of San ...

Sycuan

Electrician II

El Cajon, CA · On-site

$26 - $35.75/hr

Apprenticeship from an accredited school Skills and Knowledge: Essential: * Proficiency in ... Ability to work from ladders, scaffolds and lifts * Ability to interact effectively with team ...

L3HHCM20

Electrician Journeyman

Chula Vista, CA

$54K - $76K/yr

May lead or mentor apprentices and helper-level electricians. Qualifications: * Minimum of 2 years ... Frequently climb ladders, stairs, and scaffolding. * Work in confined spaces, tanks, bilges, and ...

Modigent

Service Plumber

El Cajon, CA · On-site

$32 - $50/hr

High school diploma or GED required; trade school, apprenticeship completion, or equivalent ... Ability to regularly lift and carry up to 50 lbs, climb ladders/scaffolding/stairs, work in ...

Modigent

Service Technician II

El Cajon, CA

$30 - $45/hr

High school diploma or GED required; trade school, vocational training, apprenticeship, or ... Ability to regularly lift and carry up to 50 lbs, climb ladders/scaffolding/stairs, work in ...

Modigent

Service Technician III

El Cajon, CA

$30 - $65/hr

High school diploma or GED required; trade school, apprenticeship completion, or equivalent ... Ability to regularly lift and carry up to 50 lbs, climb ladders/scaffolding/stairs, work in ...

Modigent

Plumber Lead

El Cajon, CA

$40 - $55/hr

High school diploma or GED required; trade school, apprenticeship completion, or equivalent ... Ability to regularly lift and carry up to 50 lbs, climb ladders/scaffolding/stairs, work in ...

Modigent

Service Technician II

El Cajon, CA · On-site

$30 - $45/hr

High school diploma or GED required; trade school, vocational training, apprenticeship, or ... Ability to regularly lift and carry up to 50 lbs, climb ladders/scaffolding/stairs, work in ...

previous pagenext page

Showing results 21-40

All JobsApprentice Scaffolding JobsApprentice Scaffolding Jobs in Spring Valley, CA

Apprentice Scaffolding information

See Spring Valley, CA salary details

$12

$22

$38

How much do apprentice scaffolding jobs pay per hour?

As of Aug 14, 2026, the average hourly pay for apprentice scaffolding in Spring Valley, CA is $22.53, according to ZipRecruiter salary data. Most workers in this role earn between $17.69 and $24.62 per hour, depending on experience, location, and employer.

Can you get an apprenticeship in scaffolding?

Yes, aspiring scaffolding apprentices can typically apply through construction companies, training providers, or industry associations. An apprenticeship usually combines on-the-job training with classroom instruction and may require a minimum age, physical fitness, and a valid driver's license. Completing an apprenticeship can lead to a certified scaffolding qualification and entry into the construction industry.

What are the key skills and qualifications needed to thrive as an apprentice scaffolder, and why are they important?

To thrive as an Apprentice Scaffolder, you need basic construction knowledge, physical fitness, and a willingness to learn, often supported by a high school diploma or equivalent. Familiarity with hand tools, personal protective equipment (PPE), and safety training certifications like OSHA are typically required. Attention to detail, teamwork, and strong communication skills help you work efficiently and safely with others on site. These skills and qualities are crucial to ensure the safe assembly and dismantling of scaffolding structures, preventing accidents and maintaining project timelines.

What are some common challenges faced by apprentice scaffolders during their training period?

Apprentice Scaffolders often face challenges such as adapting to physically demanding work, mastering safety protocols, and learning to work efficiently at heights. Additionally, apprentices must quickly develop teamwork and communication skills, as scaffolding projects typically require close coordination with experienced scaffolders and other trades on-site. Overcoming initial unfamiliarity with tools and materials, and understanding complex construction plans, are also common hurdles, but ongoing mentorship and hands-on experience help apprentices gain confidence and proficiency.

What is the difference between Apprentice Scaffolding vs Scaffold Erector?

AspectApprentice ScaffoldingScaffold Erector
CertificationsBasic safety and worksite trainingLikewise, safety training, possibly more specialized
Work EnvironmentTraining sites, construction sitesConstruction sites, industrial settings
Job RoleLearning to assemble, disassemble scaffolding under supervisionAssembling, installing, and dismantling scaffolding structures

Apprentice Scaffolding roles are entry-level positions focused on learning and assisting with scaffolding tasks, while Scaffold Erectors are skilled workers responsible for the actual installation and dismantling of scaffolding structures. Both roles require safety certifications and work in similar environments, but the apprentice position emphasizes training and skill development.

What is an apprentice scaffolder?

Apprentice Scaffolders are individuals who are undergoing training to become professional scaffolders. They work under the supervision of experienced scaffolders to learn how to safely erect, modify, and dismantle scaffolding structures at construction sites. Apprenticeships typically combine on-the-job training with classroom instruction, covering safety regulations, material handling, and installation techniques. This role is essential for gaining the hands-on experience and certifications required to advance as a qualified scaffolder.

What cities near Spring Valley, CA are hiring for Apprentice Scaffolding jobs?

Cities near Spring Valley, CA with the most Apprentice Scaffolding job openings:

Apprentice Scaffolding jobs near you
Infographic showing various Apprentice Scaffolding job openings in Spring Valley, CA as of August 2026, with employment types broken down into 86% Full Time, 12% Part Time, 1% Temporary, and 1% Contract. Highlights an 100% Physical job distribution, with an average salary of $46,867 per year, or $22.5 per hour.

A Class Outside Machinist - SDCA (Night Shift)-San Diego,California

Austal USA

Bonita, CA • On-site

$42.75/hr

Other

Posted 28 days ago

Austal USA rating

7.4

Company rating: 7.4 out of 10

Based on 38 frontline employees who took The Breakroom Quiz

286th of 489 rated machine equipment manufacturers

Job description

Overall purpose of job: To work within a team of Outside Machinists to achieve minimum production time, standards and quality in keeping with company policies, while maintaining a positive and motivated team environment.
REPORTS TO: Production Supervision
AUTHORITIES / RESPONSIBILITIES:
  • Install equipment on board vessels in a safe and productive manner.
  • Disassemble, fault find, repair and re-assemble shipboard equipment as directed by the supervisor.
  • Mark and measure to close tolerances using Austal calibrated equipment
  • Safely rig equipment following all OSHA requirements.
  • Inspection of work, identification of potential problems, initiation of corrective actions.
  • Increase awareness of Quality procedures within department
  • Ensure adherence to correct work procedures.
  • Continuously improve communications and flexibility within the team.
  • Develop other team member's skill levels.
  • Build pride of workmanship and quality through on the job training.
  • Contribute towards innovation / productivity improvements.
  • Assist in the control of waste elimination, e.g. materials, consumables etc.
  • Assist supervisor to maintain control of department equipment and its maintenance.
  • Work towards the team goal of delivering the vessel on time.
  • Follow Austal guidelines and procedures
  • Ensure work area is left clean, all equipment and tools are stowed away safely and protected against damage
  • Performs and executes work in compliance with NAVSEA STD Items
  • Must be able to travel to off-site work locations
  • Must follow Austal Off-Site Temporary Assignment Policy (SUP270)

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:
  • Comparable trade experience; comparable trade experience is defined as 5 or more years of experience working in the applicable trade, 2 years of experience in shipbuilding, or education in the trade comparable to apprenticeship or 1-year minimum work experience as a B-class outside machinist at Austal.
  • Demonstrated knowledge of shaft alignment techniques including laser alignment systems and dial indicator alignment processes.
  • Demonstrated working knowledge of machining procedures,
  • Strong mechanical aptitude required
  • Knowledge of ship terminology
  • Proven ability to interpret engineering drawings
  • Demonstrated ability to safely operate all fixed and non-fixed machinery
  • Ability set up machinery to meet flatness tolerance requirements.
  • Demonstrated ability to interpret job specifications
  • Ability to perform work on marine vessels.
  • Must be able to follow directions and work with limited supervision.
  • Ability to read and comprehend simple instructions, short correspondence, and memos.
  • Ability to write simple correspondence.
  • Ability to add, subtract, multiply, divide, and measure using the metric system.
  • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
  • Proven problem solving abilities
  • Must be able to travel to off-site work locations
  • Must follow Austal Off-Site Temporary Assignment Policy (SUP270)

TOOLS:
  • Must have full set of personal tools

LIASES WITH:
  • Supervisors
  • Production Manager
  • PDSS Leadership
  • Safety personnel

ADDITIONAL GUIDELINES:
Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA:
  • 18 years of age or older at time of application
  • Able to provide proof of US Person Status
  • No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
  • No felony convictions of Drug crimes within three years from disposition date
  • Willing to submit to a drug screen
  • Willing to submit to a background check
  • The ability to obtain and maintain a DBIDS and or any other clearance or access that may be required if deemed necessary in the scope of your position responsibilities

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites.
While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit.
Specific physical requirements include but are not limited to the following:
  • Must have the ability to bend, squat, stoop, crawl, and kneel.
  • Perform prolonged standing.
  • Ability to turn head from side to side and about the vertical axis.
  • Ability to turn body at the waist from side to side and about the vertical axis.
  • Lift/push/pull 50lbs to 75lbs on an occasional basis.
  • Lift/push/pull up to 20lbs on a frequent basis.
  • Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
  • Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
  • Able to work at a variety of levels (ex. waist, eye, overhead).
  • Demonstrate the ability to safely and appropriately use required tools and equipment.
  • Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
  • Possess sufficient handgrip and coordination to carry and operate tools and equipment.
  • Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
  • Ability to withstand cold and hot temperatures.
  • Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time.
  • Able to respond to verbal and audible sounds/commands.
  • Able to utilize adequate visual skills.
  • Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
  • Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud, + 90 dB.
SAFETY
Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
COMPENSATION:
Pay rate: $42.75 per hour
Equal Employment Commitment
Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932.
Austal's commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.

What Austal USA employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply