ZipRecruiter

Log In

1

Ac Dc Jobs in Texas (NOW HIRING)

CesiumAstro

Principal Power Electronics Engineer I

Austin, TX · On-site

$137K - $168K/yr

Design single-phase and three-phase AC-DC power supplies and power distribution systems ranging from a few kilowatts to more than 20 kW * Perform comprehensive analysis of AC-DC and DC-DC power ...

CesiumAstro

Principal Power Electronics Engineer I

Austin, TX · On-site

$137K - $168K/yr

Design single-phase and three-phase AC-DC power supplies and power distribution systems ranging from a few kilowatts to more than 20 kW * Perform comprehensive analysis of AC-DC and DC-DC power ...

Innovative IDM

BOARD REPAIR TECHNICIAN

Houston, TX · On-site

$25 - $32/hr

We are looking for an Electronic Repair Technician that can do board level repairs of industrial electronics such as AC/DC drives, PLCs, HMIs, and circuit boards. The individual can also work in a ...

NXP Semiconductors N.V.

RF Bench Tech

Austin, TX · On-site

Experience in RF theory and AC/DC circuit design Education and Experience: * Minimum associates degree in Electronics * Minimum 5 years' experience working in bench repair field * Experience in AC/DC ...

previous pagenext page

Showing results 21-40

All JobsAc Dc JobsAc Dc Jobs in Texas

Ac Dc information

See Texas salary details

$4

$21

$60

How much do ac dc jobs pay per hour?

As of Sep 4, 2026, the average hourly pay for ac dc in Texas is $21.33, according to ZipRecruiter salary data. Most workers in this role earn between $13.41 and $17.93 per hour, depending on experience, location, and employer.

What are AC DC jobs?

AC DC jobs refer to positions that involve working with alternating current (AC) and direct current (DC) electrical systems. These roles are common in fields such as electrical engineering, maintenance, and electronics, where professionals install, repair, and maintain equipment powered by AC and DC electricity. Workers in these jobs need to understand the differences between AC and DC, safety protocols, and how to troubleshoot related systems. Typical employers include manufacturing plants, power companies, and service providers for industrial and commercial facilities.

What are some common challenges faced by AC/DC electrical engineers when working on power systems projects?

AC/DC Electrical Engineers often encounter challenges such as integrating alternating current (AC) and direct current (DC) systems, ensuring compatibility between legacy and modern equipment, and managing power quality issues. They must also navigate strict safety regulations and coordinate with multidisciplinary teams, including project managers and field technicians. Staying updated with rapidly evolving technologies and industry standards is essential for success in this dynamic environment.

What are the key skills and qualifications needed to thrive as an AC/DC electrical engineer, and why are they important?

To thrive as an AC/DC Electrical Engineer, you need a solid background in electrical engineering principles, circuit analysis, and power systems, typically supported by a relevant engineering degree. Familiarity with simulation software (such as MATLAB or PSpice), electrical design tools, and industry certifications like a Professional Engineer (PE) license is often required. Strong problem-solving skills, attention to detail, and effective communication are crucial soft skills in this role. These competencies ensure safe, efficient design and maintenance of electrical systems, directly impacting project success and safety standards.

What is the difference between Ac Dc vs Electrician?

AspectAc Dc
CertificationsTypically requires electrical safety and technical certifications, similar to electricians
Work EnvironmentWorks with direct current systems, often in industrial, manufacturing, or electronics settings
Industry UsageCommonly employed in electronics, power supply, and industrial automation sectors
Job FocusSpecializes in installing, maintaining, and repairing AC/DC electrical systems and components

While Ac Dc technicians focus on direct current systems, electricians work with both AC and DC electrical wiring and systems across various industries. Both roles require electrical safety certifications and share similar work environments, but Ac Dc specialists typically have more specialized training in DC power systems.

What are popular job titles related to Ac Dc jobs in Texas?

For Ac Dc jobs in Texas, the most frequently searched job titles are:

What job categories do people searching Ac Dc jobs in Texas look for?

The top searched job categories for Ac Dc jobs in Texas are:

What cities in Texas are hiring for Ac Dc jobs?

Cities in Texas with the most Ac Dc job openings:

Ac Dc jobs near you
Infographic showing various Ac Dc job openings in Texas as of August 2026, with employment types broken down into 80% Full Time, 11% Part Time, 8% Contract, and 1% Nights. Highlights an 86% Physical, 3% Hybrid, and 11% Remote job distribution, with an average salary of $44,367 per year, or $21.3 per hour.

QC Testing Technician

Cates Control Systems, Inc.

Plano, TX • On-site

$22 - $26/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 24 days ago

Job description

Description

Cates Control Systems in Plano, TX is looking to hire a Testing Technician. Joining the Cates team is both challenging and rewarding. You will become an important member of a very talented and dynamic team within our industry. If this sounds like you, please read on!


The Role

  • Pull-test all wires to verify a good connection.
  • Make sure that all wires are labeled correctly.
  • Make sure that all fuses are correct according to design standards.
  • Make sure that there are no wire frays.
  • Check all components to verify correct sizes and voltages.
  • Apply the required voltage and verify that all components operate correctly.
  • If the control panel requires UL approval, you must make sure all components meet UL requirements via schematic designer.
  • Apply all identification stickers and UL stickers to control panel(s).
  • Fill out all check sheets supplied with drawings for your department. Verify quality prior to hand off to shipping department.
  • Log all time spent on each job into the Epicor database using the traveler supplied with the drawings.

Education and Qualifications

  • High school diploma or GED preferred
  • 2 years prior experience preferred
  • Attention to detail
  • Problem solving/analysis
  • Leadership traits
  • Mentoring peers and other technicians
  • This position requires a significant amount of bending and standing
  • Ability to read wiring schematic
  • AC-DC circuits: Needs a fundamental knowledge of AC-DC circuits and the difference between the two. This person needs to understand Kirchhoff's law and apply it to power and control circuits.
  • Ohms and Watt's Law: Needs to know how to calculate simple and advanced circuit calculations for industrial control panel needs.
  • NEC and UL508A: Needs to have the ability to look up and understand NEC and UL508A rules and apply them to industrial control panels. NEC and UL508A will also need to be used in electrical design of power and control circuits. Wiring sizing, component selection, and component uses are also required.
  • PLC: Needs to understand PLC hardware basics and understand basic PLC ladder logic.
  • Motor Controls and Automation: Needs to understand advanced motor controls and automation systems. Troubleshooting improperly working circuits is required. A firm understanding about closed loop control and individual components in that loop is also needed. Process controller programming and setup is also required. Must be able to read sequence of operations for timers and counters and apply them to control panels.
  • AC and DC drives: Needs a fundamental knowledge of AC and DC drives. Basic and advanced setup of various drives is required.
  • Motors: Needs to understand how different AC, DC and servo motors work.
  • Transformers: Needs to understand how to make connections for various application needs.
  • Multi-meter use: Needs to understand how to use a digital multi-meter to make various electrical readings.
  • Basic computer skills

More About Us

Cates Control Systems was founded over 40 years ago and is a systems integration company that partners with manufacturing firms to develop and implement automation solutions to increase production, improve quality and reduce costs. Our customers are extremely diverse and spread all over North America (and a few internationally). Our customers make roofing shingles, fry potato chips, roast coffee, process poultry and beef, distill water, bottle apple juice, and ship all over the world.

Cates is committed to delivering quality solutions that we stand behind through service and support. Our vision is to positively impact the lives of others. We are a fun, friendly company with a strong family atmosphere and 12 core principles that guide us at every step in our success. Our culture is firmly rooted in the values of honesty, integrity, commitment and reliability. To learn more, please visit us at www.cates.com.


keywords: test, quality, automation, control panels


Job Type: Full-time

Salary: From $22.00 - $26.00 per hour


Benefits:

  • 401(k)
  • Dental insurance
  • Flexible spending account
  • Health insurance
  • Health savings account
  • Life insurance
  • Paid time off
  • Referral program
  • Vision insurance

Schedule:

  • 10 hour shift

Ability to commute/relocate:

  • Plano, TX 75074: Reliably commute or planning to relocate before starting work (Preferred)

Education:

  • High school or equivalent (Preferred)

Experience:

  • testing industrial control panels: 2 years (Preferred)
  • ability to read wiring schematics: 2 years (Preferred)
  • UL508a: 2 years (Preferred)
  • AC-DC circuits: 2 years (Preferred)
  • PLC hardware basics and PLC ladder logic: 1 year (Preferred)
  • motor controls and automation systems: 1 year (Preferred)
  • digital multi-meter: 1 year (Preferred)
  • basic computer skills: 1 year (Preferred)

Work Location: In person

Apply